Latest iron item Tenders | Government iron item Tenders

Central Government/Public Sector

CTN :44807356

13 Apr, 2026 NA

Kapurthala - Punjab

Tender For supply of ferritic steel sheet 3x1250x2100mm., as per drawing: rdso spec. no. c-k201, grade x2crni12 (409m) table 1&2, heat treatment condition 2b as per table-5., packing instruction: stainless steel sheets, coils and plates:- (a) stainless steel (austenitic & ferritic steel) coils. the coil shall be protected in reasonably good condition to withstand normal handling hazard during transit with the following provision as the barest minimum: i) coil should be wrapped with a layer of water proof paper through out whole length. ii) coil should be wrapped with a layer of biodegradeable sheet. iii) outer & inner of coil should be wrapped with gi sheet. iv) side of the coil should be covered with card board sheet. v) after this whole coil should be wrapped with biodegradeable plastic sheet of suitable thickness. vi) the inner edge of the coil should be protected by gi ring followed by another iron ring. vii) outer edge of the coil should be wrapped with gi ring. viii) coil should be securely strapped with minium 5 steel bands through the eyes of the coil and minium 3 steel bands on the circumference of the eye. ix) whole coil should be mounted on wooden blocks for easy lifting/stacking. x) the sheets in coil form for thickness 2mm and above shall have: inner dia of coil 450-800mm outer dia of coil 1000-1300mm weight of coil 2.4 - 10 tonnes xi) the sheets in coil form for thickness below 2mm shall have: inner dia of coil 450-650mm outer dia of coil 1000-1300mm weight of coil5.0 - 10 tonnes. (b) stainless steel (austenitic & ferritic steel plates/sheets) i) the sheets/plates shall be supplied in bundles of optimum weight: 2mt+/-10% & each sheet/plate shall be seprated with a layer of water proof paper, after this the whole bundle should be wrapped with double layer of water proof paper and a biodegradeable plastic sheet of suitable thickness. a metal protection in edges should also be provided. ii) all bundles shall have a minimum of 2 hoops upto 1.2 meter in length and one extra hoop for every additional meter. the bundles shall also be provided with skid (wooden packing under neath) to facilitate handling. mechanical damange & corrosion during transit ifany shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44815807

16 Apr, 2026 NA

Ratlam - Madhya Pradesh

Tender For corrigendum : auction sale of others - released, condemned and u/s ci scrap considting, {brake block, hp liner, compressor liner, fp bp cock body and other miscellaneous cast iron items.} total qty - 20 mt, location - scrap yard loco motive care center ratlam. mode of delivery by actual weighment basis and on as is where is basis, custodian- sse-dl-rtm , fdp- 50 days.

corporations/Associations/Others

CTN :44803181

29 Apr, 2026 62.21 Lacs

Puruliya - West Bengal

Tender For tender for supply of procurement of spares of ring granulator for chp rtps d d -end disc of ring granulator trh-53 , hopper side liner ring granulator , hopper top liner of ring granulator , tramp iron pocket for crusher , tramp pocket roof for crusher no trm-53 , tramp pocket liner of ring granulator , hopper side liner (r) , ring granulator , clamp bar plate of ring granulator , center disc of ring granulator trh-53 , rear top cover for crusher mod.-trm-53 , set of screen plate for crusher trm-53 , suspension shaft (end) of rg trm-53 , suspension shaft (center) of rg trm-53 , 50 opening cage bar l& r , ring granulator , 65 opening cage bar l&r rng granulator , breaker plate 40 thk for crusher trm-53

State Government

CTN :44769824

05 May, 2026 42.51 Lacs

Hisar - Haryana

Tender For repair and rehabilitation of exposed iron bars in raker column,ring beam,support beams,grillage columns,shell upto 200 feet and other allied areas of cooling tower-ii at rgtpp, khedar(hisar) - repair and rehabilitation of exposed iron bars in racker columns, ring beam, support beams, grillage columns, shell up to 200 feet and other allied areas of cooling tower unit-ii at rgtpp, khedar (hisar).

CTN :44452364

11 Apr, 2026 NA

Udhampur - Jammu And Kashmir

Tender For bid to ras supply of is test sieve of aperture size 10mm, 4.75mm, 2.36mm, 1.18mm, 600mic, 300mic, 150mic, 90mic in 20 cm dia. as per specification documents. , pan and cover of 20 cm dia is sieve. as per specification documents. , is test sieve of aperture different sizes. as per specification documents. , sieve pan size 45 and 20 cm in dia. as per specification documents. , electronic weighing balance machine 20 kgs cap. as per specification documents. , enamel tray size 45cm x 30cm x 4cm. as per specification documents. , enamel tray size 30cm x 25cm x 4cm. as per specification documents. , bitumen centrifuge extractor electric operated. as per specification documents. , benzene packed in glass pack of 2.5 ltrs. as per specification documents. , standard sand for the sand replacement method, field density test. as per specification documents. , parafin wax for density of dbm and bc. as per specification documents. , vernier calipers 150 x 0.1mm digital , core cutting machine. as per specification documents. , ring and ball apparatus, digital. as per specification documents. , marshal mould of size 101.6 mm dia inside x 76.2 mm height. as per specification documents. , marshall mould filter paper should have 100 mm dia 1.0 mm thickness. pkt of 100 circles , bitumen extractor filter paper. as per specification documents. , specific gravity bottle of 50 ml capacity. as per specification documents. , kerosene pressure stove should have 3.00 liter tank capacity fitted with single 4 no burner. , standard spatula made of stainless steel blade with wooden handle approx. 300 mm length. as per specification documents. , steel straight edge. as per specification documents. , standard le chatelier flask, soundness test apparatus. as per specification documents. , test sieve 75 micron ss mesh with brass frame 200 mm dia. as per specification documents. , test sieve 90 micron ss mesh with brass frame 200 mm dia. as per specification documents. , ordinary mercury-in-glass thermometer designed for the 0 to 60 degree range. as per specification documents. , ordinary mercury-in-glass thermometer designed for the 0 to 100 degree range. as per specification documents. , ordinary mercury-in-glass thermometer designed for the 0 to 360 degree range. as per specification documents. , nitrile rubber gloves for laboratory use. as per specification documents. , cotton cloth for laboratory use. as per specification documents. , stainless steel flakiness index gauge. as per specification documents. , stainless steel elongation index gauge mounted on wooden block. as per specification documents. , digital electronic weighing machine max 3 kg capacity. as per specification documents. , cast iron cube moulds with base plate size 15 x 15 x 15 cms. as per specification documents. , diamond core bits for core cutting machine. as per specification documents. , measuring cylinder capacity 50ml, 100ml, 250ml and 500ml each. as per specification documents. , specific gravity apparatus, buoyancy balance test apparatus. as per specification documents.

CTN :44808213

18 Apr, 2026 12.88 Lacs

Bikaner - Rajasthan

Tender For providing of electricls tools & equipments - heavy duty screwdriver insulated , electrician screwdriver thin stem insulated handle , knife double bladed electrician , chisel firmer with wooden handle , , (a) crimping tool , wire cutter and stripper , hacksaw frame , tweezers , drill hand brace , plane cutters , smoothing cutters , file flat rough , file flat bastard , file rasp, half round , de soldering gun , contactor & auxiliary contacts (rm) , contactor & auxiliary contacts. (rm) , pin type, shackle type, egg typ & suspension type insulators including , hardware fitting , portable electric drill machine , load bank (lamp/heater typ , brake test arrangement with tv spring balance rating , laboratory type induction coi , series test lamp (rm) , knife switch dpdt fitted with fuse terminals (rm) , knife switch tpdt fitted with fuse terminals (rm) , miniature circuit breaker (rm , earth plate (rm) , earth electrode (rm) , elcb and rccb (rm) , fuses (rm) , rheostat (sliding type) , capacitors (rm) , various electronic components (rm) , various lamps (rm) , plug socket piano switch lamp holder (rm) , cables , twisted pair , non-metallic sheathed cable , underground feeder cable , ribbon cable , metallic sheathed cable multi- , conductor cable coaxial cable , direct-buried cable (rm) , rubber mat (rm) , electrician helmet , rcc pole with accessories (ms angle iron, 'c' clamp, stay insulator etc.) and materials , ohm meter; series type & shunt type, portable box type , digital multi meter , a.c. voltmeter m.i. analog, portable box type housed in bakelite case , milli voltmeter centre zero analog, portable box type housed in bakelite case , ammeter mc analog, portable box type housed in bakelite case , ac ammeter mi, analog, portable box type housed in bakelite case , kilo wattmeter analog , (b) frequency meter (digital) , magnetic flux meter , tachometer , tong tester/clamp meter , megger , single phase variable auto transformer , growler , ac starters , oscilloscope dual trace , function generator , discrete component trainer , linear i.c. trainer , digital i.c. trainer , domestic appliances- , 2. mixture & grinder , h. washing machine semi-automatic , i. motor pump set , oil testing kit , battery charger , current transformer , potential transformer , 15 or 17 computer or latest version , d.c. shunt generator with control panel , motor-generator (ac to dc) with control panel , d.c. compound generator with control panel including fitted rheostat, voltmeter, ammeter and breaker , fire buckets , fire extinguisher co2 , black board/white board , almirah , metal rack , lockers with drawers , working bench , writing board , instructor's table , instructor's chair , diesel generator set with changeover switch, over current breaker and water/air-cooled with armature, star-delta connections ac 3 phase , dc generators-series, shunt and compound type for overhauling practice , pillar electric drill machine motorized , motorised bench grinder , a.c. series type motor , single phase capacitor motor with starter switch , ceiling fan coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter , ev charger , ev charger (home) , ac squirrel cage motor with star delta starter and triple pole iron clad switch fuse with mechanical load. , ac phase-wound slip ring motor with starter switch , universal motor with starter/switch , synchronous motor with accessories like starter, excitation arrangements. , thyristor igbt controlled d.c. motor drive with tacho-generator feedback arrangement , thyristor/igbt controlled a.c. motor drive with , single phase transformer, core type, air cooled , three phase transformer, shell type oil cooled with delta/ star , electrical machine trainer

State Government

CTN :44786363

10 Apr, 2026 NA

Sirsa - Haryana

Tender For corrigendum : quotations for maintenance of roads removal of existing ipb by manual means and disposal of dismantled material with all lead and lift as per technical specification clause 202.3 , pvc pipe , providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths ductile iron (di) standard specials plain /flanged/ socketed confirming to is9523-2000 with rubber ring (epdm/sbr) joints such as tees, bends, tapers, caps etc. with in trenches in di pipe line complete including all material, labour, testing and commissioning along with pipe line as per technical specifications and as per direction of engineer. 1. up to 300mm dia

State Government

CTN :44786365

10 Apr, 2026 NA

Sirsa - Haryana

Tender For corrigendum : quotations for maintenance of roads , pvc pipe, providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths ductile iron (di) standard specials plain /flanged/ socketed confirming to is9523-2000 with rubber ring (epdm/sbr) joints such as tees, bends, tapers, caps etc. with in trenches in di pipe line complete including all material, labour, testing and commissioning along with pipe line as per technical specifications and as per direction of engineer. 1. up to 300mm dia

State Government

CTN :44786369

10 Apr, 2026 NA

Sirsa - Haryana

Tender For corrigendum : quotations for maintenance of roads , pvc pipe , providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths ductile iron (di) standard specials plain /flanged/ socketed confirming to is9523-2000 with rubber ring (epdm/sbr) joints such as tees, bends, tapers, caps etc. with in trenches in di pipe line complete including all material, labour, testing and commissioning along with pipe line as per technical specifications and as per direction of engineer. 1. up to 300mm dia

State Government

CTN :44778371

28 Apr, 2026 3.57 Lacs

Kangra - Himachal Pradesh

Tender For supply of jyoti v t pump impleller grey cast iron d d - impeller grey iron , impeller collect with nut lock washer , impeller shaft ss410 , impeller shaft coupling ss , line shaft 3 mtr long cs , line shaft coupling ss , line shaft 1 point 5 mtr long cs , head shaft top shaft with nut and key , bowl bearning bush bronze , bowl neck ring bronzed , bearing holder assembly , stainless steel stud with nut , column pipe 3 mtr long , columnn pipe 1 point 5 mtr long , column pipe coupling , column pipe coupling adapter , suction case bearning bronze , assembly bowl 225t2a4 , suction case assembly cast iron

Iron Item Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors