Get complete information related to latest Iron Pipes Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Iron Pipes Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Iron Pipes Tenders.
Tender For bhoj dharti,bhoj darara,bhoj mataur, group of 3 no. of habitations annual mtc.works for water supply - c fixing of c.i. valves hydrants extra for fixing sluice valves/flap valves socketed or flanged, providing and fixing cast iron double flanged swing check type reflux (non return)valves, l filter media providing, lowering, laying in trenches, aligning, fixing in position and jointing, na ci/ductile ironpipes and specials providing and laying double flanged (screwed / welded) centrifugally (spun) cast iron.
Tender For supply of urchages sanitation material - alum, sanitizer, painting brush 4'', painting brush 6'', sgsv pipe (ceramic pipe 2.50x8), aggregate mix, iron rods (all sizes), iron nails (all sizes), iron angle, iron flat bar, cement sheet (8 ft long), steel mosquito mesh (3 x 1/2 width), chain-link fencing mesh (5 ft width), iron sheet (16 mm), ironpipes (all types), toughened glass (2.6 x 2 ft size), steel tap, kangaroo hp-45 large stapler
Tender For auction sale of depot ferrous scrap - lot no.m.mms.exmp.d & i.06.2026-27.05 description- mixed ferrous melting scrap amalgamating the various types consisting of fresh plate, sheets plate cuttings and shearing of all shapes and sizes. structural sections, scrap low phosphorous steel, ironpipes, bar fittings, buffer cases and plungers (other than cast steel) sleeves and spindles with heads, screw couplings, tie bars, all types of equalising beams & centralize beams, fish plate other than cast steel), wire & wire rope, all types of sleeper, all types of bars and rods, junk kutchra, steel fabrication, nut bolt, grease seal etc. (our offer): mixed ferrous melting scrap amalgamating the various type consisting of fresh plate, sheets plate cuttings and shearing of all shapes and sizes, structural sections, lever, scrap low phosphorous steel, ironpipes, bar fittings, flap door, irs sleepers, shaft, wire rope, pipes, brake cylinder, buffer cases and plungers other than cast steel sleeves and spindles with heads, screw couplings, tie bars, all types of centralize beams, pendrol clip, fish plate other than cast steel, all types of bars and rods, junk kuchra, steel fabrication, nut bolt, grease seal etc., as in the lot. materials are laying in one place at "d-1" sector & two places at "i-2" sector. before bidding, bidders are requested to inspect the lot. cutting may be allowed only for off sizes for loading purpose. loading will be done by purchaser's own arrangement.
Tender For auction sale of depot ferrous scrap - lot no.y.hf-1.exmp.t-3 06.26.57 description- scrap steel fabrication (heavy) and miscellaneousellaneous large bulky assembles.tank case holder and similar receptacles .misc items of steel, such as furniture, buckets iron wire utensils tinboard, fire extinguishers without nf etc. our offer: scrap steel fabrication (heavy) bogie frame and fiat bogie frame and miscellaneousellaneousbattery box,bk cylinder, cell container,bolster,various sizes of ironpipes, [coach doors , various sizes of tanks, some quantity of gear case coated with dry foam of oil and grease ,steel such as furniture, buckets iron wire utensils tinboard, fire extinguishers without nf etc. and other miscellaneousellaneoushf-1 items [ as in the lot] cutting allowed only for hf-1 off size material for loading purpose (above material may or may not be available in the lot) [loading will be done by purchaser's own arrangement]
Tender For auction sale of depot ferrous scrap - lot no.y.mms.exmp.f-1.06.26.56 description- mixed ferrous melting scrap amalgamating the various type consisting of scrap classes like- fresh plate & sheets plate cuttings and shearing of all shapes and sizes structural sections.scrap low phosphorous steel .ironpipes .bar fittings .buffer cases and plungers (other than cast steel ) sleeves and spindles with heads .tie bars .all types of equilising beams & centralize beams , wire and fish plate other than cast steel.wire & wire rope,all types of chains, all types of sleeper ,shock observer some quantity of negligeable nf item may be attached , all types of bars & rods. junk kutchra, spring wire , screw couplings, steel fabrication and misc, nut bolt,grease seal etc. as in the lot (above item may or may not be available in the lot) [loading will be done by purchaser's own arrangement]
Tender For auction sale of depot ferrous scrap - lot no.m.mms.exmp.f & g.06.2026-27.04 description- mixed ferrous melting scrap amalgamating the various types consisting of fresh plate, sheets plate cuttings and shearing of all shapes and sizes. structural sections, scrap low phosphorous steel, ironpipes, bar fittings, buffer cases and plungers (other than cast steel) sleeves and spindles with heads, screw couplings, tie bars, all types of equalising beams & centralize beams, fish plate other than cast steel), wire & wire rope, all types of sleeper, all types of bars and rods, junk kutchra, steel fabrication, nut bolt, grease seal etc. (our offer): mixed ferrous melting scrap amalgamating the various type consisting of fresh plate, sheets plate cuttings and shearing of all shapes and sizes, structural sections, lever, scrap low phosphorous steel, ironpipes, bar fittings, flap door, irs sleepers, shaft, wire rope, pipes, brake cylinder, buffer cases and plungers other than cast steel sleeves and spindles with heads, screw couplings, tie bars, all types of centralize beams, pendrol clip, fish plate other than cast steel, all types of bars and rods, junk kuchra, steel fabrication, nut bolt, grease seal etc., as in the lot. materials are laying in one place at "f" sector & one place at "g-1" sector before bidding, bidders are requested to inspect the lot. cutting may be allowed only for off sizes for loading purpose. loading will be done by purchaser's own arrangement.
Tender For auction sale of depot ferrous scrap - p-4/jun-26/01: scrap ironpipes/rods (miscover 1 feet long i.e. ms, gi & ss) as available in the lot. (cutting allowed for loading) bidders are requested to visit the materials before bidding.
Tender For auction sale of depot ferrous scrap - mixed ferrous melting scrap amaigamating the varous typed consisting of fresh plate, sheets plate cuting and shearing of all shaped and size. structural sectons, scrap low phosphorous steel, ironpipes, bar fittings, buffer cases and plungers (other than cast steel) sleeves and spindles with head, screw couplings, ties bar all types of eqaulilising beams & centralize beams, fish plate other than cast steel wire & wire rop all types of chains all types of sleeper all types of bars and rods junk kutchra, steel fabriction nut bolt, grease seal etc. [our offer:- miscellaneous ferrous scrap (equalizing stay long pin, short pin, equalizing stay bracket, lh & rh bracket, spring guide, anchor link bracket on bogie frame, dust shield spring, flange for fixing shock absorber, equalizing stay, anchor link, bss hanger, bss hanger pin, brake head, block hanger for bogie brake, levers, brake head adjuster, brake head spring, parts of shock absorber, compensating ring etc.]).i lot no ea982604005 location- scrap yard
Tender For corrigendum : supply of vitreous china squatting pan orissa pattern size 580 x 440 mm white integral foot rest water closet , brass non return valve, 25mm bore , water storage pvc tank 500 ltrs cap triple layer ,heat retardant,uv protection, break resistant with threaded lid , corner glass shelf 10 inch x10 inch , european type ewc s trap , cp toilet paper holder , rotational three layered , white colour moulded polythylen water storage tank 1000 ltr , cast brass gate valve, with iron wheel head screwed both ends and for ironpipes and fixed for bore of pipe 15 mm , cast brass gate valve, with iron wheel head screwed both ends and for ironpipes and fixed for bore of pipe 25 mm. , cp 2 in 1 bib cock 15mm bore short body. , flushing cistern 10 ltrs capacity , hdpe water tank cover for 1000 ltr cap , threaded or hinges type , cast brass gate valve, with iron wheel head screwed both ends and for ironpipes and fixed for bore of pipe 20 mm. , curtain rod 20mm dia ss 2 mm thick , al bihari hinges , cp brass waste coupling 32 mm , gi dead plug 15 mm. , white cement in 01 kgs pack , looking mirror 600x450x4mm beveled edge , with 4 plugs, screw and gitti , gi tank nipple 15 mm , cp towel rail 750mm long, 20mm dia. , spindle brass for 15 mm bib cock , cp extension nipple 100mm long suitable for 15mm bore . , glass sheet 4 mm thick , half round piston for mixer , ss door handle 100 mm , gi pipe medium grade 15 mm with socket , cp brass soap disc , stainless steel butt hinges size 125 mm , door stopper brass 125 mm , hydraulic door closer universal type , gi nipple 15 mm x 50 mm , pvc waste pipe 32 x 750 mm long with flunge 40 mm superior quality , glazed oil putty * /bid number : gem/2026/b/7452728 + /dated: 13-06-2026 ' ' / bid document 1 / 30
Tender For providing and supplying spare parts for all type of borewell as per requirement in b.n.c.m.c. area 2026-2027 - providing and supplying spare parts for all type of borewell as per requirment in bncmc area 2026-2027, :item no. 1 : providing and laying in trenches following mm dia. medium grade having embossed as isi mark galvanised ironpipes ?of kilogram/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats including removing existing pipe line if necessary and conveying and stacking the same in pwd chowky or as directed etc. complete. pwd ssr 2022-2023 pg no 268 41.20,41.21 25 mm dia, 32mm dia, item no. 2 : providing and supplying blue mdpe pipes conforming to iso 4427:1996 manufactured from virgin resin pe 80 food grade compounded raw material having blue colour only with quality assurance certificate from quality agencies like wrc / cipet (india) / dvgm / kiwa / spgn etc. for usage in drinking water system. the cost shall include testing of all materials, inspection charges, transportation up to store, transit insurance, loading, as specified and directed, unloading,stacking excluding gst levied by goi & gom in all respect, etc. complete as specified and directed.mjp dsr 2023-24 pg no 128/1/b 25 mm dia, 50 mm dia, item no 3 providing, erecting and giving test of centrifugal monoblock pump set conforming to is 9079 operating at 2900 rpm with ci impeller, priming funnel, cock, suitable flanges at suction and delivery side. pump shall have common shaft for pump and motor. motor shall be suitable for working on 415 v 10%, 3 ph, 50 hz a.c. supply. motor shall be tefc type. pump set shall be suitable for working at various discharge and head requirements. pump shall be erected on provided c.c. foundation block with suitable foundation bolts grouted in c.c. foundation block.centrifugal monoblock pump set (single stage) mjp mech.csr 2023-24 pg no 5 pm 2-1-5] 10 hp, item no 4 : supplying and erecting submersible pump 150 mm dia (with bronze / stainless steel (cf8m) impeller) up to 8 stages mjp mech.csr 2023-24 pg no 01 pm 1-2-1,pm 1-2-2] 1.5 hp, 2.0 hp, item no 5 supplying & erecting pressure booster pump, single phase, 50c/s, a.c.supply of 0.75 kw/ 1 h.p., with discharge of 480 to 13 lpm for 10 to 50 mtrhead & 25 mm suction/ 25 mm delivery pipe, for domestic pressure boosting applications pwd ele csr 2022-2023 pg no 206 12-6-2, item no 6 supplying & erecting pressure booster pump, single phase, 50c/s, a.c.supply of 0.375 kw/ 0.5 h.p., with discharge of 120 to 12 lpm for 10 to 40mtr head & 25 mm suction/ 25 mm delivery pipe, for domestic pressure boosting applications. pwd ele csr 2022-2023 pg no 206 12-6-1, item no. 7 supplying & erecting automatic control panel for 1 ph, 230 volt, a.c. submersible/centrifugal pump set up to 3 hp consisting of dol starter of suitable relay range s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. pwd ele csr 2022-2023 pg no 220 12-4-20, item no.8 supplying & erecting automatic control panel for 3 phase , 415 volt, a.c, submersible/centrifugal pump set up to 7.5 hp consisting of dol starter having relay range 9-14 amp,s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. control panel should offer single phasing, phase reversal, phase imbalance etc .pwd ele csr 2022-2023 pg no 204 12-4-17, item no. 9 supplying and erecting d.o.l. starter 400v. 3 phase, 50cycles with no volt coil and overload element with necessarymaterials and connected to supply for 10 h.p., item no 10 supplying & erecting flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.pwd ele csr 2022-2023 pg no 220 12-4-8, item no. 11 supplying, erecting & terminatin