Latest iron rake scrap Tenders | Government iron rake scrap Tenders

CTN :45042586

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned scrap loaded boxnm1 & boxnr wagons no as following: [1] cr 10019704257 boxnm1 (ms scrap loaded) [2] ser 10079560640 boxnm1 (ms scrap loaded) [3] scr 10099460203 boxnm1 (ms scrap loaded) [4] ser 10079661514 boxnm1 (ms scrap loaded) [5] scr 25099560945 boxnr (ms scrap loaded) [6] scr 10099633188 boxnr (ms scrap loaded) condition:- [1] as is where is basis.[2] cutting is allowed for loading facilities only.[3] to be sold without all available excluded fittingsas follows:- (i) for boxnm1 & boxnr : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 03 & 05 are fitted with 22w(m) casnub bogie which are to be sold with wagon.[4] all wagons will be sold along with the scrap material present in wagons.[5] although sale unit of condemned wagon is in nos but delivery will be given on weighment basis(weight slip) at ssy weighbridge with saleable weight of 175 mt only.

CTN :45042587

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bfkhn wagons no as following: [1] cncr 98259100282 bfkhn. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (11.640 mt) is the lot quantity (11.640 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchasermay, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for bfkhn : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 01 is fitted with 22w casnub bogie which is to be sold with wagon.

CTN :45042593

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of depot ferrous scrap - pl no. 98050448, scrap m.s. consisting of box wagon body cutting, pipe, rod, nut-bolt, slack adjuster, hand wheel, control rod, bogie end pull rod, side bearer, channel, angle, wagon door and other box wagon body cutting parts available on the lot.[excluding steel wagon door & steel plate, knuckle, pivot, adopter if available on the lot.]

CTN :45042590

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1, bobrnm1, boxnr & boxnrm2 wagons no as following: [1] scr 10099662256 boxnm1 [2] er 72029660312 bobrnm1 [3] ser 10079768312 boxnm1 [4] scr 10099734601 boxnm1 [5] scr 10099663109 boxnr [6] ser 10079664607 boxnm1 [7] cr 25019660267 boxnr [8] er 72029581600 bobrnm1 [9] special repair 10069660824 boxnm1 [10] scr 10099662881 boxnm1 [11] ser 10079664171 boxnm1 [12] scr 25099660645 boxnrm2 [13] ser 25079764509 boxnr condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (131.980 mt mt) is the lot quantity (131.980 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for boxnm1, boxnr & boxnrm2 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bobrnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.

CTN :45042589

07 May, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bcnm1 wagons no as following: [1] special repair 30069061629 bcnm1 [2] scr 30099060630 bcnm1 [3] nr 30038961448 bcnm1 [4] ser 30078965246 bcnm1 [5] nfr 30058960216 bcnm1 [6] er 30029125699 bcnm1 [7] nfr 30058964481 bcnm1 [8] wr 30088932580 bcnm1 [9] cr 30019161645 bcnm1. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (139.600 mt) is the lot quantity (139.600 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchasermay, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for bcnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 01, 04 & 09 are fitted with 22w(m) casnub bogie which are to be sold with wagon.

CTN :45031623

06 May, 2026 NA

Multi City - Odisha

Tender For auction sale of others - srl no.[1]lot no.cmb 0326153, desc.-u/s released scrap coupler body (cbc), qty-20 nos., wt-3.285 mt, location-north end of roh shed/bndm , srl no.[2]lot no.cmb 0326154, desc.-u/s released scrap c.p top for boxn, qty-90 nos., wt-3.522 mt, location-north end of roh shed /bndm , srl no.[3]lot no.cmb 0326155, desc.-u/s released scrap c.p bottom, qty-110 nos., wt-5.045 mt, location-north end of roh shed /bndm , srl no.[4]lot no.cmb 0326156, desc.-u/s released scrap c.p top modified, qty-50 nos., wt-3.086 mt, location-north end of roh shed /bndm , srl no.[5]lot no.cmb 0326157, desc.-u/s released scrap yoke for cbc, qty-100 nos., wt-10.116 mt, location-north end of roh shed /bndm , srl no.[6]lot no.cmb 0326158, desc.-u/s released scrap knuckle (escc), qty-100 nos., wt-3.670 mt, location-north end of roh shed /bndm , srl no.[7]lot no.cmb 0326159, desc.-u/s released scrap brake beam, qty-250 nos., wt-17.928 mt, location-north end of roh shed /bndm , srl no.[8]lot no.cmb 0326160, desc.-u/s released scrap brake cylinder (14"), qty-15 nos., wt-1.050 mt, location-north end of roh shed /bndm , srl no.[9]lot no.cmb 0326161, desc.-u/s released scrap brake cylinder (12"), qty-16 nos., wt-0.938 mt, location-north end of roh shed /bndm , srl no.[10]lot no.cmb 0326162, desc.-u/s released scrap flap door for boxn & boxnhl, qty-1200 nos., wt-81.780 mt, location-north end of roh shed /bndm , srl no.[11]lot no.cmb 0326168, desc.-u/s released scrap coupler body (cbc), qty-50 nos., wt-8.211 mt, location-scrap yard,msl/bndm, srl no.[12]lot no.cmb 0326169, desc.-u/s released scrap knuckle (escc), qty-40 nos., wt-1.468 mt, location-scrap yard,msl/bndm, srl no.[13]lot no.cmb 0326170, desc.-u/s released scrap yoke for cbc, qty-30 nos., wt-3.035 mt, location-scrap yard,msl/bndm, srl no.[14]lot no.cmb 0326171, desc.-u/s released scrap brake beam, qty-30 nos., wt-2.151 mt, location-scrap yard,msl/bndm, srl no.[15]lot no.cmb 0326172, desc.-u/s released scrap brake cylinder (14"), qty-10 nos., wt-0.700 mt, location-scrap yard,msl/bndm, approx. total ferrous weight-145.985 mt

CTN :45019296

06 May, 2026 NA

Multi City - Odisha

Tender For auction sale of others - srl no. [1] lot no.- cmb 0226131 , desc- u/s released scrap coupler body (cbc) , qty- 60 nos., wt- 9.854 mt location- north end of roh shed /bndm , srl no. [2] lot no.- cmb 0226132 , desc- u/s released scrap c.p top for boxn , qty- 100 nos., wt- 3.914 mt location- north end of roh shed /bndm , srl no. [3] lot no.- cmb 0226133 , desc- u/s released scrap c.p bottom , qty- 120 nos., wt- 5.504 mt location- north end of roh shed /bndm , srl no. [4] lot no.- cmb 0226134 , desc- u/s released scrap c.p top modified , qty- 40 nos., wt- 2.469 mt location- north end of roh shed /bndm , srl no. [5] lot no.- cmb 0226135 , desc- u/s released scrap knuckle (escc) , qty- 150 nos., wt- 5.505 mt location- north end of roh shed /bndm , srl no. [6] lot no.- cmb 0226136 , desc- u/s released scrap helical coil spring (outer with inner) , qty- 660 nos., wt- 7.590 mt location- north end of roh shed /bndm , srl no. [7] lot no.- cmb 0226137 , desc- u/s released scrap adoptor narrow jaw , qty- 2800 nos., wt- 35.596 mt location- north end of roh shed /bndm , srl no. [8] lot no.- cmb 0226138 , desc- u/s released scrap flap door for boxn & boxnhl , qty- 500 nos., wt- 32.875 mt location- north end of roh shed /bndm , srl no. [9] lot no.- cmb 0226146 , desc- u/s released scrap coupler body (cbc) , qty- 30 nos., wt- 4.927 mt location- scrap yard,msl/bndm , srl no. [10] lot no.- cmb 0226147 , desc- u/s released scrap knuckle (escc) , qty- 30 nos., wt- 1.101 mt location- scrap yard,msl/bndm , srl no. [11] lot no.- cmb 0226148 , desc- u/s released scrap adoptor narrow jaw , qty- 200 nos., wt- 2.543 mt location- scrap yard,msl/bndm , srl no. [12] lot no.- cmb 0226149 , desc- u/s released scrap flap door for boxn & boxnhl , qty- 300 nos., wt- 19.725 mt location- scrap yard,msl/bndm, approx. total ferrous weight-131.603 mt

CTN :45031621

06 May, 2026 NA

Multi City - Jharkhand

Tender For auction sale of others - srl no.[1]lot no.c&w/dps/ 2025-26/14, desc.-u/s & scrap released old narrow jaw adapter, qty-800 nos., wt-9.960 mt, location-sick line dps, srl no.[2]lot no.c&w/dps/ 2025-26/18, desc.-u/s & scrap released old knuckle, qty-90 nos., wt-3.359 mt, location-sick line dps, srl no.[3]lot no.c&w/dps/ 2025-26/19, desc.-u/s & scrap released old yoke, qty-84 nos., wt-7.992 mt, location-sick line no-14 , srl no.[4]lot no.c&w/dps/ 2025-26/20, desc.-u/s & scrap released old cbc coupler body, qty-180 nos., wt-27.517 mt, location-sick line no-14 , srl no.[5]lot no.c&w/dps/ 2025-26/21, desc.-u/s & scrap released old cp top(modified), qty-188 nos., wt-11.750 mt, location-sick line no-14 , srl no.[6]lot no.c&w/dps/ 2025-26/22, desc.-u/s & scrap released wagon scrap flap door, qty-100 nos., wt-6.700 mt, location-sick line no-14 , srl no.[7]lot no.c&w/dps/ 2025-26/23, desc.-u/s & scrap released old brake beam, qty-9 nos., wt-0.624 mt, location-sick line no-14 , srl no.[8]lot no.c&w/dps/ 2025-26/24, desc.-u/s & scrap released wagon scrap stainless steel door, qty-100 nos., wt-6.380 mt, location-sick line no-14 , srl no.[9]lot no.c&w/dps/ 2025-26/25, desc.-u/s & scrap released old cp,top(ordinary), qty-87, wt-3.403 mt, location-sick line no-14 , srl no.[10]lot no.c&w/dps/ 2025-26/26, desc.-u/s & scrap released old cbc lock, qty-64 nos., wt-0.403 mt, location-sick line dps, srl no.[11]lot no.c&w/dps/ 2025-26/27, desc.-u/s & scrap released old wedge block, qty-61 nos., wt-0.427 mt, location-sick line dps

CTN :45019289

06 May, 2026 NA

Multi City - Jharkhand

Tender For auction sale of others - lot no.c&w/adtp/24-25/74, desc.- unserviceable & scrap released sheets/plates of different sizes and thickness miscellaneous c&w fittings like different types of rods, angles, channels, hand brake wheel, broken foot steps, door, rester, cbc lock, broken knuckle pin, broken spring, etc. and other small fittings (like rivet, screw, bolts, nuts, and washers) which are not being maintained saperately in bin card, approx. total ferrous weight-70 mt.

Central Government/Public Sector

CTN :45031582

08 May, 2026 NA

Multi City - Haryana

Tender For auction sale of depot ferrous scrap - scrap components of knuckle of sorts and sizes us and ur. loc- material lying at bin no. c-13 in scrap yard judw. remarks-1 loading by purchaser .

Iron Rake Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector