Latest iron shed Tenders | Government iron shed Tenders

CTN :45513027

22 Jun, 2026 15.00 Lacs

Gurdaspur - Punjab

Tender For supply of material and labour for construction of indoor court 54 feet 32 feet covered shed structure,dimensions of one badminton court size 44 feet 30 feet 23 feet,6 layer synthetic,iron shed roof,iron shed surrounding,aluminium door size 7 feet 3.5 feet,aluminium windows size 4 feet 5 feet,towel stand size 600mm 2 feet,flood lights led 200watt 230 volt single phase,electric switches and sockets,side wall fans 230watt,exhaust fans 230watt,benches three seater,umpire chair height 1.55mtr size 60mm 30mm,portable fixed badminton poles 5ft 1 inch,badminton net

corporations/Associations/Others

CTN :45494938

24 Jun, 2026 NA

Trivandrum - Kerala

Tender For auction sale of unserviceable wheel disc,unserviceable brake drums ll &tata,eicher,unserviceable gear wheels & shafts,unserviceable broken spring leaves ll , tata & eicher,unserviceable aluminium alloy materials,old gi sheet and cut pieces,general m.s iron scrap,cast iron scrap,unserviceable auto parts,unserviceable miscellaneous auto parts,old aluminium cut pieces,unserviceable ft axle -i beam,unserviceable crank shafts , cam shaft ,etc,unserviceable king pin,piston pin,shackle pin ll &tata,eicher,unserviceable aluminium radiators etc,unserviceable diesel tanks, air tanks,etc,unserviceable brake chamber assemblies etc,unserviceable propeller shafts,etc,unserviceable clutch disc assemblies & brake shoe assemblies,unsericeable clutch assemblies. tt,ll,eicher,etc),unserviceable flywheels,face plate, clutch backe plates etc,unserviceable cylinder liner,unserviceable joint cup & cross parts,brass scrap,unserviceable crown and pinion assay ll and tt (22no),unserviceable slack adjuster assemblies tt,ll,eicher,,unserviceable crown wheels ll &tata,etc,unservicable joint bracket,rusted metal oil and grease barrels 210ltr,unserviceable bearings with sleeves,unserviceable copper strip,scrap castiron turning waste and cast iron powder,unserviceable armature ll,tt,eicher,unserviceable stator,unserviceable stator solinoid,unserviceable tt engine 1510,unserviceable air suspention parts.

CTN :45490381

15 Jun, 2026 4.20 Lacs

Fatehabad - Haryana

Tender For talwara khurd- construction of iron shed at village talwara khurd, block ellenabad, distt. sirsa (mp-lads)

CTN :45490390

15 Jun, 2026 4.18 Lacs

Fatehabad - Haryana

Tender For shergarh-construction of iron shed and main gate, repair in shri nand ram sc choupal at village shergarh, block dabwali, distt. sirsa (mp-lads)

CTN :45490394

15 Jun, 2026 2.93 Lacs

Fatehabad - Haryana

Tender For alipur titu khera- construction of iron shed in sc chopal at village alipur titu khera, block sirsa, distt. sirsa (mp-lads)

Central Government And Public Sector

CTN :45488137

16 Jun, 2026 NA

Multi City - Assam

Tender For auction sale of depot ferrous scrap - p.l- s.m. scrap (brake beam, brake disc., lower spring beam, foot plate, buffer, ball joint, control arm, coupler body and others various kind of miscellaneous iron scrap etc.)

Central Government And Public Sector

CTN :45488139

16 Jun, 2026 NA

Multi City - Assam

Tender For auction sale of depot ferrous scrap - 98050126- s scrap (consisting of brake beam, lower spring beam, ball joint, brake disc, anchor link, brake caliper, control arm, hanger, lateral bump stop, brake head, pin for brake head, nut bolts and others various kinds of miscellaneous iron scrap etc.)

Co-operative

CTN :45474707

23 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For c.i. item on conversion/supply basis - c.i.pipe with standard thickness & flange as per i.s.i. specification machined from dia 4" to 12"(i) new material supply basis, (ii) on conversion basis, c.i. bend, duck foot bend, cross,tee and other such part all size as per drg.(i) new material supply basis, (ii) on conversion basis, c.i.drum, rod,bush, bari,idler pully, break drum for cane unloader etc as per drg.(i) new material supply basis, (ii) on conversion basis, c.i.coupling from 4"dia to 10"dia plane/flange type(i) new material supply basis, (ii) on conversion basis, c.i. firing frame,door side chamber, bagasse rotary chuts, rotary feeder drum , clit, hanger, beam, gutka, furnace nozzle, clam etc. and other such parts for lipi/taxmaco boiler as per different drg.high chrome grade 25 , casting & machined temp. capacity 15000 c(i) new material supply basis, (ii) on conversion basis, c.i. clamp/ hanger clit small size for lippi boiler no. 3 as per drg. blr-79 high chrome grade 25 , casting & machined temp. capacity 15000 c, c.i scapper mixed with pig iron and having standard hardness dully machined as per drg.no.mh-66 ( r)(i) new material supply basis, (ii) on conversion basis, (iii) grooving of c.i.scrapper as per drg., centrifused casted c.i.coupling for fmg gear of kcp mill od 1000 mm.pcd 815(18 holes)9+9,with machining complete as per drg.no.mh-93, c.i.motor cover for different type motor, mill setting bolt & nut for kcp mill drg.no.mh-106, mill setting bolt & nut for taxmaco mill drg.no.mh-38, c.i.worm and worm wheel for crystilizer as per drg.bh-39 ( r ) machined, c.i.worm and worm wheel for vertical crystilizer no. 2 complete set as per drg. machined, eccentric shaft and eccentric for hopper as per drg.no.bh-60, m.s.shell for under feed roller as per drg.mh-95.length 1525 mm.od 750mm,thickness 18mm, c.i. muff coupling for cane unloader as per drg.no cu-25, c.i.gear for magma mixture as per drg.no bh-137.od 450mm,no.of teeth-51.bore 70mm, width 63mm, c.i.brake drum for s.d.centrifugal machine taxmaco make duly machined(i) as per drg.no. bh 81/1, (ii) as per drg.no bh-81/2, c.i.v-belt pully of cont.centrifugal machine duly machined, c.i.scale seat for juice weighing scale duly machined and drilled as per drg.no.mh-195, id fan pully (as per drawing no. bl-r-128/2024-25), id fan motor pully (as per drawing no. bl-r-129/2024-25), boiler grate bar material-cont iron. (as per sample/drg.), boiler furnace manage gap bar. (ap per sample/drg.), chief engineer

Central Government/Public Sector

CTN :45488088

16 Jun, 2026 NA

Multi City - Jharkhand

Tender For auction sale of others - disposal of ferrous scrap released material such as: (1) brake beam icf, qty=01 no.=25 kg. (2) c.i. valve, qty=07 nos.=4.2 kg. (3) dashpot spring 16 ton, qty=07 nos.=161 kg. (4) feed pipe, qty=36 nos.=36 kg. (5) brake pipe, qty=40 nos.=40 kg. (6) passenger emergency alarm device, qty=01 no.=01 kg. (7) angle cock, qty=29 nos.=43.5 kg. (8) g.m wheel valve 40 mm, qty=19 nos.=15.2 kg. (9) flushing valve, qty=12 nos.=9.6 kg. (10) gravity cock, qty=728 nos.=36.4 kg. (11) shock absorber, qty=02=14 kg. (12) drain cock, qty=18 nos.=10.8 kg. (13) isolating cock, qty=01 no.=0.8 kg. (14) g.i. pad lock off size, qty=31 nos.=15.5 kg. (15) fire extinguisher, qty=74 nos.=133.2 kg. (16) pressure gauge of size, qty=15 nos.=1.5 kg. (17) distributor valve for icf, qty=01 no.=25 kg. (18) door closer, qty=25 nos.=20 kg. (19) swinging nut, qty=51 nos.=51 kg. (20) swinging link pin, qty=69 nos.=172.5 kg. (21) flex ball cable, qty=05 nos.=10 kg. (22) step complete mounting (foot step), qty=05 nos.=80 kg. (23) rotary lock lift, qty=02 nos.=4 kg. (24) installation lever, qty=32 nos.=9.6 kg. (25) control arm top with bush, qty=02 nos.=116 kg. (26) primary bump stop, qty=29nos.=1.45 kg. (27) lavelling valve, qty=05 nos.=5 kg. (28) dump valve, qty=08 nos.=6.4 kg. (29) axle end cover, qty=17 nos.=34 kg. (30) centering disc lower & upper, qty=08 nos.=08 kg. (31) modified cbc restrictor, qty=02 nos.=10 kg. (32) empty iron drum capacity 210 ltrs, qty=20 nos.=320 kg. (33) empty iron drum capacity 20 ltrs, qty=120 nos.=120 kg. (34) axle box pivot bush, qty=03 nos.=45 kg. (35) nut & bolt etc, qty=700 kg. having local lot no. dhn/2026/86. location:- blacksmith room near c&w/store/dhn.

Central Government/Public Sector

CTN :45474537

16 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap loco parts consist of damper, axle box housing, spheri block, gear casing, side buffer, cow catcher, yoke pin, bushes , liner, modified link, spring holder were plate, axle guide, torque arm, sand box, iron pipe, rubber bush assly, plant for ¿ blower, sand holding bracket, coil spring, knuckle, clevis, clevis pin, screw coupling, lock, double rotary, knuckle pin, equalizer beam, compensating beam, link, short beam, long beam, sand ejector, dowel plate and ci and other attachments. location- a by 2

Iron Shed Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government And Public Sector

Central Government And Public Sector

Co-operative

Central Government/Public Sector

Central Government/Public Sector