Latest irradiance meter Tenders | Government irradiance meter Tenders

State Government

CTN :45397974

18 Jun, 2026 80.77 Lacs

Kota - Rajasthan

Tender For corrigendum : work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all l

Central Government/Public Sector

CTN :44434794

17 Jun, 2026 NA

Golaghat - Assam

Tender For corrigendum : design, engineering, manufacturing, procurement of materials and bought out components, assembly at shop, inspection including inspection by tpia, testing at manufacturer works, packing, supply of electrical heat tracing - design, engineering, procurement, fabrication, inspection, testing, transportation, and supply electrical heat tracing system to be installed at numaligarh refinery limited(nrl), assam including erection & commissioning spares, mandatory spares , special tools and tackles, supervision, site work & training charges at site as per the enclosed tender standard specifications, job specification, data sheets etc. and other codes and standards attached or referred as per material requisition for numailgarh refinery limited, golaghat, assam, india.

Central Government And Public Sector

CTN :45034478

17 Jun, 2026 NA

Chittorgarh - Rajasthan

Tender For tender for supply of radiation resistant cctv camera : : - type-ii (color ccd/cmos , 100m rad) radiation resistant camera head along with radiation resistant pan & tilt unit and mounting brackets. as per attached annexure-1 , corrigendum annexure-2 and annexure-3. , cabling system to transmit signals form vault cameras to ccu system which includes camera to ccu radiation resistant composite cable of 300 meters with 6 sets of cable connectors and applicable power cables as per annexure-1 , corrigendum annexure-2 and annexure-3. , field camera control unit and its racking system which includes 2 no. of camera control unit sub rack & 6 sets of camera control unit (ccu) cards (3 to be installed in field and 3 to be kept as spare for future ) as per annexure-1 , corrigendum annexure-2 and annexure-3 or equivalent sub rack system as per annexure-1 , corrigendum annexure-2 and annexure-3. , setup to convert ccu signals to optical signals which should include 3 no. of fiber optic transmitter and receiver set (capable of 4 camera system) and 6 no. of fiber patch cords , single mode , simpex and 3 no. of light interface unit 12 port , as per annexure-1 , corrigendum annexure-2 and annexure-3. , type-vi (color ccd/cmos sensor , non rr auto dome camera) with mounting brackets as per annexure-1 , corrigendum annexure-2 and annexure-3. , mechanism to transmit signal from non radiation resistant camera including , poe power supply for non-rr ptz camera (6 no.) field jb /rack in ss material for non-rr ptz camera (2 no.) liu 6 port , din rail mountable for non radiation resistant ptz camera (3 no.) din rail 8 port un-managed network switches (3 no.). 4 no. of fiber patch cords , single mode , duplex for non-radiation resistant ptz camera or equivalent as per annexure-1 , corrigendum annexure-2 and annexure-3. , mechanism for receiving signal at control room including light interface unit 24 port , rack mount (2 no.) and network video encoder (minimum 16-channel) along with accessories for intra-panel connections (2 no.) and 24 port un-managed network switches or equivalent (2 no.) , 4 no. of fiber patch cords , single mode , duplex as per annexure-1 , corrigendum annexure-2 and annexure-3. , recording and monitoring pc as per annexure-1 , corrigendum annexure-2 and annexure-3. , joystick suitable for mounting on control room panel cutout as per panel drawing as per annexure-1 , corrigendum annexure-2 and annexure-3. , 21 inch led backlit led color monitor as per annexure-1 , corrigendum annexure-2 and annexure-3. , video monitoring software setup as per annexure-1 , corrigendum annexure-2 and annexure-3 for minimum 9 camera. , mobile dolly consisting of camera control unit (ccu) , encoder , switch , joystick , engineering laptop with 15-inch to 17-inch screen , video management software for one camera , connection cables etc and their cabling as per annexure-1 , corrigendum annexure-2 and annexure-3. , control panel/rack 42u/ 27u setup for racking all instruments of cctv at control room as per annexure-1 , corrigendum annexure-2 and annexure-3. , cabling network optical fiber cable (6 core armored cable)-2000 meters twisted pair cable , rs485 , signal cable -200 meters unarmored coaxial cable rg59 -200 meters ethernet cable , cat-6 utp cable -610 meters video connector set -10 meters ethernet connectors rj-45 100 pieces conduit for cables 800 meters and other separate cables/ power cables/accessories required during installation one set of tool tackles for assembly/ disassembly/ of radiation resistant camera head viz. allen keys , lubricants , cable ties , loctite , heat sink , blank caps etc. 2 no. of control panel/rack size 27u setup for racking all instruments of cctv at field as per annexure-1 , corrigendum annexure-2 and annexure-3. as per annexure-1 , corrigendum annexure-2 and annexure-3 . , site installation & commissioning as per annexure-1 , corrigendum annexure-2 and annexure-3. , spare radiation resistance camera head s

CTN :45492668

30 Jun, 2026 NA

Kamrup - Assam

Tender For tender for supply of premium leatherette solid wood compact size 3 seater sofaset with solid wood material frame , two door wardrobe with external drawer material and subtype engineering wood laminate frame meterial almira , medium back mesh chair with matte finish anf fixed armrest and single locking mechanism , prelaminated particle board unit with back side storage cabinet with shutter and shelves , premium leatherette solid wood compact size 3 seater sofaset with two single seater secondary units of solid frame material , clear glass with engineering wood and movable base center table , clear glass with engineering wood and assembly type lock down corner table

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

CTN :45457129

19 Jun, 2026 NA

Patiala - Punjab

Tender For supply of material for repair of windows of lab no .303 of civil engineering department at pup. - aluminium section, aluminium angle , aluminium clip beading m.s. hinges , neoprene rubber gasket , plain glass , aluminium tower bolt , aluminium handle , stainless steel screw , hacksaw blade (double), steel j hook

corporations/Associations/Others

CTN :45463141

29 Jun, 2026 NA

Junagadh - Gujarat

Tender For expression of interest for development of two material recovery facilities (mrfs)of total capacity of 61 tpd for junagadh municipalcorporation on engineering, procurement, construction basiswith operation & maintenance of 5 years

Central Government / Public Sector

CTN :44545120

22 Jun, 2026 NA

Vadodara - Gujarat

Tender For corrigendum : design, engineering, manufacture, procurement of materials and bought out components, assembly at shop, inspection including inspection by tpia, testing at manufacturers works, packing, training, transportation & supply of distributed control system & analysers for ms blending system including supply of all mandatory spares, pre-commissioning, commissioning/start up spares, special tools & tackles & fat / sat / pre-commissioning / commissioning as per mr, supply of accessories & documentation as per the enclosed tender standard specifications, job specification, data sheets etc., other codes and standards attached or referred as per material requisition. on fot point of despatch for indigenous bidders for petrochemical and lube integration project “lupech” (j-18) at iocl gujarat refinery, india.

Corporations And Associations And Others

CTN :45416708

24 Jun, 2026 NA

Allahabad - Uttar Pradesh

Tender For survey,maintenance and regular cleaning, desilting work of trunkandbranchsewer in teliarganj, mehdauri, engineering college,oldkatra,ganganagar,ashoknagar,nyay marg,rajapur, muirabad,civil linesi and civillinesi and civillines2 wards inprayagraj - survey, maintenance and regular cleaning/de-silting work of trunk and branch sewer of internal diameter 150 mm dia to 1200 mm dia including minor repairing of sewer pipe of all diameter, raising of manhole chamber to road level ,replacement of damaged manhole cover with new cover, minor repairing of manhole/chamber in teliarganj ,mehdauri , engineering college, old katra , ganganagar , ashok nagar , rajapur, muirabad,civil lines -i and civil lines-2 wardsalong with regular cleaning and maintenance of interceptor sewer of dia. 150 mm to 1200 mm from phaphamau bridge to rajapur stp and interceptor sewer of dia. 150 mm to 1200 mm from ashok nagar to rajapur stp in sewerage district – d of nagar nigam prayagraj by using super sucker and sewer suction cum jetting machine including supply of all labour,material, safety equipment's and t&p required for successful completion of the work as per direction of engineer-in-charge”.

CTN :45425190

19 Jun, 2026 NA

Bazpur - Uttarakhand

Tender For supply of printing material for different departments in sugar mill - cane department – staff attendance registers at centers, cane requisition slips, inspection books, weighbridge check books, daily road center cane receipt registers, shift-wise inspection reports, purchase center-wise daily cane receipt data, cane procurement details; chief engineer's office – turbine (150 hp), boiler (150 hp), vls boiler (150 hp), fibrizer turbine (150 hp), 2500 kva turbine, engineering boiler, 3000 kva turbine, diesel engine generators, t.g. set, w.p.s. turbine, cooling tower, power house panel 2500; chief chemist's office – pan (120 hp), pan grader (120 hp), ecp receiver (120 hp), pan sampler. डंबेनप्जम 50 चंहम मबी ठ.डेबनप्जम 50 छंम मबी भ.डेबनप्जम 50 छंम मबी ब.डेबनप्जम.50 चंहम मंबी छंड एचसम वेटर देवार्ट एचड़ी परिटेट डंठ1. 01 jan 100 chanma party report part 2. gate passes (inward/outward, 2 copies), gate pass books (serial nos. 01–500), gate pass registers (material inward/outward, employee gate pass, electrical staff, officers' exit), security department (employee gate pass book, material inward/outward register, employee gate pass register, electrical staff register, material movement register, officers' exit register), store department (debit note, freight voucher, indent voucher [purchase], indent voucher [general], stock position voucher, packing slip, delivery challan, stock verification pad, stock material receipt, issue slip voucher, permanent loan a/c register, form rg-9), general office (envelopes: small, medium, large; dispatch register, receipt register, acknowledgement voucher), transport department (log book, movement register), time office (application for leave, form 12, attendance register, time card). primary school - attendance register

Irradiance Meter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government And Public Sector

corporations/Associations/Others

Central Government / Public Sector

Corporations And Associations And Others