Latest iso 14001 Tenders | Government iso 14001 Tenders

Central Government/Public Sector

CTN :45506061

02 Jul, 2026 NA

Hubli - Karnataka

Tender For providing of hiring of agency for iso certification service - iso 9001 - quality management system (qms), iso 14001 - environmental management system (ems), iso 45001 - occupational health & safety management system (ohas); consulting, initial audit, surveillance..

State Government

CTN :45263804

22 Jun, 2026 4.63 Crore

Panchkula - Haryana

Tender For corrigendum : tender for the supply of various equipments - muffle furnace, "al2o3 sample plate, al2o3 furnace door block, protection glove, crucible clip, crucibles, karl fischer titrator, "titration vessel, detector electrode with lead, generator electrode (with frit) with lead, desiccant tube and cap, injection septa (pack of 10), gas tight syringe 1.0ml , luer needle 17-gauge, dust cover, results manager software, main power pack, fuse, karl fischer titration reagent(s), nist calibration standard, refrigerated centrifuge (bench top), bottles/falcon tubes/adapters for 0.2ml tubes, one set of other items (adapters) required for improving the applicability/system performance should to be quoted, nitrogen evaporator, evaporation tubes, gas fuse , water purification system including water softner, cartridges, filters etc. for , bomb calorimeter, "ignition wire, cotton thread, combustion crucible, bomb, nist certified benzoic for calibration, any other accessories required for analysis of food samples., gas chromatograph with ecd, tcd, fid with autosampler, "pesticide column (30 m x 0.250mm x 0.25m (5ms (95% dimethyl-, 5% diphenyl-polysiloxane / 1ms (100% dimethyl polysiloxane or equivalent) 100 mm column for fatty acid profiling with main concern of trans fatty acid application, column for cholesterol application, stationary phase: 95% dimethyl-, 5% diphenyl-polysiloxane (30 m x 0.250mm x 0.25m),, "vial sets (1, 2 ml, crimp type, amber and clear glass), vials (10, 20ml crimp type with cap & septa), 300/500 l recovery vials, septa ptfe/silicone (for 1, 2 ml vials), septa ptfe/silicone (for 10, 20 ml headspace vials), ergonomic crimping tools for different vial types, ergonomic decapping tools for different vial types, head space vials 10,20 ml capacity, suitable syringes for quoted autosampler, suitable headspace syringe /valve/loop, quechers kits for pesticides and herbicides in following matrices:, matrices with high fat, matrices with high water content, matrices with high pigmented, spe cartridges for water., ultra performance liquid chromatography (uplc) with photodiode array (pda), fluorescence (fld) and refractive index detector (rid), sample vials with 1.5 ml or greater, stainless steel ultra sonic bath with the capacity of 5 l or more, with time setting (min) 1-30min or continuous operation with led and push button (should be ip 33 protection class) for sonication of spare parts as well as solvents, fittings, frits, ferules and tubings, tubing cutter, solvent bottles (1000 ml capacity), solvent filters (glass & ss both, compatible manual syringes -10 l, 20 l, 50 l, standards for hplc calibration for pda, ri and fluorescence detector, consumables required for each detector must be provided., "hplc columns: one each of, c8 = 250 4.6 5m c18 = 250 4.6 5m, cyano = 250 4.6 5m. amino = 250 4.6 5m, phenyl = 250 4.6 5m. silica = 250 4.6 5m., all columns must be supplied with respective guard column and holder. ", uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., ft-ir with atr & liquid cell, " hydraulic press with kbr die and pellet holder, suitable mortar pestle (dia 5-6 cm), suitable portable de humidifier to maintain 30- 60% rh, temperature and relative humidity digital indicator with calibration certificate from iso 17025 accredited lab., reference nist standard polystyrene film (0.3 mm) over the range of 3800 cm-1 to 650 cm-1., abbes r

CTN :45506905

17 Jun, 2026 NA

Chamoli - Uttarakhand

Tender For providing of hiring of agency for iso certification service - iso 9001 - quality management system (qms), iso 14001 - environmental management system (ems), iso 45001 - occupational health & safety management system (ohas); consulting; guidance for documentation ..

corporations/Associations/Others

CTN :45484961

30 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For providing of hiring of agency for iso certification service - iso 9001 - quality management system (qms), iso 14001 - environmental management system (ems), iso 45001 - occupational health & safety management system (ohas), iso 27001 - information security manage..

CTN :45354531

11 Jun, 2026 NA

Darjeeling - West Bengal

Tender For corrigendum : supply of iso certificate

Central Government/Public Sector

CTN :45473101

29 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of hex head bolt m20x130 as per is:1364 (part 1) / iso 4014, gr. 10.9 zink electroplated. make: tvs / unbrako only. material to be purchased from authorized dealers only with authorization certificate atthe time of offer. material test certificate required from oem/ nabl approved lab, warranty certificate required as per irs condition . material to be supplied in standard oem s packing. [ warranty period: 30 months after the date of delivery ] ]

CTN :45448173

26 Jun, 2026 NA

Delhi - Delhi

Tender For supply of supply & installation of high efficiency water cooling and potable water system of 7-8 stage with cu+zn booster facility and uv lamp with following capacities with water at 15°c cooled from 40°c inlet water at 35°c ambient. evaporator shall be high tank type and shall be insulated. environment friendly refrigerant i.e. hfc r-134 a system shall be sealed and refrigerant shall be controlled. an adjustable thermostat having an off position shall control refrigeration system. cabinet shall be galvanized steel. cooling unit should be single phase 220 v, 50 hz, with cooling coil, heavy gauge galvanized steel complete as required with 3 nos. faucets. the product should have iso 9001, iso 14001 & bis certification. cooling capacity : 80 ltr/hr. and storage capacity 120 liters

Central Government And Public Sector

CTN :45450010

26 Jun, 2026 NA

Darjeeling - West Bengal

Tender For providing of hiring of agency for iso certification service - iso 9001 - quality management system (qms), iso 14001 - environmental management system (ems), iso 45001 - occupational health & safety management system (ohas); surveillance audit, re-certification au..

CTN :45441084

18 Jun, 2026 NA

Bazpur - Uttarakhand

Tender For supply of hardware materials in sugar mill - m.s. washer (all sizes). isi/iso standard, m.s. rivit (all sizes). isi/iso standard, aluminum rivits (all sizes) isi/iso standard, copper rivit (all sizes) isi/iso standard, m.s. bolt & nuts b.s.w (all sizes) isi/iso standard, m.s. bolt & nuts f.t. in m.m. size isi/iso standard, m.s. nut bsw (all sizes) isi/iso standard, s.s. bolt with nuts f.t. (all sizes) grade 304 isi/iso standard, spring washer (all sizes) flat section . isi/iso standard, copper rod size- to 2 isi/iso standard, wire nail (all sizes). isi/iso standard, s.s. botl with nut (all sizes). grade 304 isi/iso standard, s.s. washer (all sizes). isi/iso standard, nyloc nut (all sizes). isi/iso standard, brass rod all size isi/iso standard, split pin (all sizes). isi/iso standard, high tensile bolts & nut. isi/iso standard, high tensile allen key bolt (all sizes) isi/iso standard, s.s. rod all size grade 304 isi/iso standard, m.s. stud, size: 10 x 100 mm. isi/iso standard, locktite-262. isi/iso standard, s.s. plate grade- 304., size: 16 mm. x 400 mm. x 370 mm. isi/iso standard, s.s. plate size: 16 mm. x 400 mm. x 370 mm. grade 304 isi/iso standard, brass sim size: 0.05 mm. x 1 mtr. x 1 mtr. isi/iso standard, do size: 0.10 mm. x 1 mtr. x 1 mtr. isi/iso standard, do size: 0.15 mm. x 1 mtr. x 1 mtr. isi/iso standard, do size: 0.20 mm. x 1 mtr. x 1 mtr. isi/iso standard, do size: 0.25 mm. x 1 mtr. x 1 mtr. isi/iso standard, do size: 0.50 mm. x 1 mtr. x 1 mtr. isi/iso standard, h.t. counter shank screw (full thread). size: 5/8 x 2 isi/iso standard, m.s. counter shank screw, size: x 3 . isi/iso standard, s.s. stud size: 12 mm. x 50 mm., do - size: 10 mm. x 50 mm., do - size: 12 mm. x 115 mm., do - size: 16 mm. x 115 mm., m.s. counter shank bolt, size: 5/8 x 1 ., do - size: x 3 ., s.s. squire head bolt, size: 14 x 35 mm., do - size: 16 x 35 mm., s.s. counter shank bolt, size: 12 mm. x 65 mm., s.s. stud, size: 12mm. x 50 mm., do - size: 10mm. x 50 mm., do - size: 12mm. x 115 mm., do - size: 16mm. x 115 mm., counter shank bolt size- " x 1 ", m.s. round plain size- " dia, do - size- 5/8" dia, do - size- 1" dia, do - size- 1 " x dia, m.s. squre size 3" x 3" both side right angle straight size 3" x 3" square x 2mtr. long, mt&ut certificate required, -do-size 4" x 4" x 2mtr mt&ut certificate required

CTN :45430527

19 Jun, 2026 NA

Patiala - Punjab

Tender For supply of medical equipments in various locations in distt. patiala (as per detail attached) - supply, ot table, hydraulic operated with smooth gear mechanism, double cylinder loak proof, stainless steel, medical refrigerator 250-300 ltr. with shelf temperature setting (approx) +0 to +8 c, voltage 220 - 240 v, freguency 50/60 hz, ot light ceiling mounted single dome 12 led with led 50000 lux 22" dia dome with 4 reflector of 8 dia. auto spring balanced, heavy duty step down transformer. sterilizable central handle., ecg machines 12 leads single print 10-hour standby time, continuous print more than 3-hour, auto-analysis and auto-diagnosis for routine ecg parameters, built-in large capacity memory, casseta 14*x17* for pre-installed dr system for xray at mkh patiala make agfa, semi auto analyzer with built in software for the calculation and curve plotting. light source led, open system capable using all grand reagents and all the test programs should be in open mode. user interface: lcd display with touch key board, flow cell type permanent flow cell. memory >= 500 tests, in-built thermal printer, in-built thermal printer required, accessories to be supplied 1. micro pipettes (* no.) - 2 variable (5-50), (100-1000), small tips 500 nos. & large tips- 500 number, laproscopic surgical instrument set, ups 1kva offline for ultrasound machine simulated sine wave or better voltage avr mode 200-245v voltage battery mode 230vac +10%e frequency (htz) on battery 50/60hz + 0.1hz, 30 min backup, iso 14001/bis certification, biphasic defibrillator monitor 8.4" inch size screen, charging time of less than 9 seconds for maximum energy of 2 to 360 joule, synchronized & asynchronized cardio-version and having in-built thermal printer, monitoring 12 lead ecg, heart rate, spo2, & nibp, 230v, 50hz ac mains and battery capable of delivering up to 50 shocks at 200 joule, iso /en 60601-1, certified, oem warranty 3 year, boyles apparatus, 4 cyl mechanical with 3 gas system with hypoxic guard with 2 vaporizer (halothane & isoflurane), ice lined refrigerator (ilr) 144 lt 220 volt 50 hertz, in build stabilzer led (3-digit digital display), galvanized steel, stem alchol thermometer, ground clearance (min) 100 millimeter, holdover time (in a continuous external temperature of +43 degree celsius -24 hour, sets of instruments used for laparoscopy surgerya. gull bladder extractor, b. call stone spoon extractor c. 10 mm safety trocar, d. aspiration needlee. 5mm and 10 mm reducers, metallic continuous spray pump 1.5 ltr. (ganesh pump) type: hand compressor sprayer, tank: brass. tank capacity: 1.5 lit. pump barrel brass, working pressure, 40 - 45 psi, baby warmer steel tubular structure pretreated and powder coated heater rotation +90, bed tilt should be 615 , led displays, aulomatically cut off at 38 degree celsius, probe accuracy specilication: +0.1 c @ 30 c to 42 c, 200 to 240vac 50 hz supply

Iso 14001 Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government And Public Sector