Latest iso 20000 certification Tenders | Government iso 20000 certification Tenders

State Government

CTN :45263804

22 Jun, 2026 4.63 Crore

Panchkula - Haryana

Tender For corrigendum : tender for the supply of various equipments - muffle furnace, "al2o3 sample plate, al2o3 furnace door block, protection glove, crucible clip, crucibles, karl fischer titrator, "titration vessel, detector electrode with lead, generator electrode (with frit) with lead, desiccant tube and cap, injection septa (pack of 10), gas tight syringe 1.0ml , luer needle 17-gauge, dust cover, results manager software, main power pack, fuse, karl fischer titration reagent(s), nist calibration standard, refrigerated centrifuge (bench top), bottles/falcon tubes/adapters for 0.2ml tubes, one set of other items (adapters) required for improving the applicability/system performance should to be quoted, nitrogen evaporator, evaporation tubes, gas fuse , water purification system including water softner, cartridges, filters etc. for , bomb calorimeter, "ignition wire, cotton thread, combustion crucible, bomb, nist certified benzoic for calibration, any other accessories required for analysis of food samples., gas chromatograph with ecd, tcd, fid with autosampler, "pesticide column (30 m x 0.250mm x 0.25m (5ms (95% dimethyl-, 5% diphenyl-polysiloxane / 1ms (100% dimethyl polysiloxane or equivalent) 100 mm column for fatty acid profiling with main concern of trans fatty acid application, column for cholesterol application, stationary phase: 95% dimethyl-, 5% diphenyl-polysiloxane (30 m x 0.250mm x 0.25m),, "vial sets (1, 2 ml, crimp type, amber and clear glass), vials (10, 20ml crimp type with cap & septa), 300/500 l recovery vials, septa ptfe/silicone (for 1, 2 ml vials), septa ptfe/silicone (for 10, 20 ml headspace vials), ergonomic crimping tools for different vial types, ergonomic decapping tools for different vial types, head space vials 10,20 ml capacity, suitable syringes for quoted autosampler, suitable headspace syringe /valve/loop, quechers kits for pesticides and herbicides in following matrices:, matrices with high fat, matrices with high water content, matrices with high pigmented, spe cartridges for water., ultra performance liquid chromatography (uplc) with photodiode array (pda), fluorescence (fld) and refractive index detector (rid), sample vials with 1.5 ml or greater, stainless steel ultra sonic bath with the capacity of 5 l or more, with time setting (min) 1-30min or continuous operation with led and push button (should be ip 33 protection class) for sonication of spare parts as well as solvents, fittings, frits, ferules and tubings, tubing cutter, solvent bottles (1000 ml capacity), solvent filters (glass & ss both, compatible manual syringes -10 l, 20 l, 50 l, standards for hplc calibration for pda, ri and fluorescence detector, consumables required for each detector must be provided., "hplc columns: one each of, c8 = 250 4.6 5m c18 = 250 4.6 5m, cyano = 250 4.6 5m. amino = 250 4.6 5m, phenyl = 250 4.6 5m. silica = 250 4.6 5m., all columns must be supplied with respective guard column and holder. ", uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., uv-visible spectrophotometer, ",0.5, 1 and 3-ml quartz cuvettes 10 mm path length, 0.5, 1, and 3 ml glass cuvettes 10 mm path length, cuvette holder, suitable certified standards for validation including holmium oxide glass filters for wavelength calibration & nist traceable, nist traceable potassium dichromate., ft-ir with atr & liquid cell, " hydraulic press with kbr die and pellet holder, suitable mortar pestle (dia 5-6 cm), suitable portable de humidifier to maintain 30- 60% rh, temperature and relative humidity digital indicator with calibration certificate from iso 17025 accredited lab., reference nist standard polystyrene film (0.3 mm) over the range of 3800 cm-1 to 650 cm-1., abbes r

CTN :45354531

11 Jun, 2026 NA

Darjeeling - West Bengal

Tender For corrigendum : supply of iso certificate

Central Government/Public Sector

CTN :45473101

29 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of hex head bolt m20x130 as per is:1364 (part 1) / iso 4014, gr. 10.9 zink electroplated. make: tvs / unbrako only. material to be purchased from authorized dealers only with authorization certificate atthe time of offer. material test certificate required from oem/ nabl approved lab, warranty certificate required as per irs condition . material to be supplied in standard oem s packing. [ warranty period: 30 months after the date of delivery ] ]

CTN :45441084

18 Jun, 2026 NA

Bazpur - Uttarakhand

Tender For supply of hardware materials in sugar mill - m.s. washer (all sizes). isi/iso standard, m.s. rivit (all sizes). isi/iso standard, aluminum rivits (all sizes) isi/iso standard, copper rivit (all sizes) isi/iso standard, m.s. bolt & nuts b.s.w (all sizes) isi/iso standard, m.s. bolt & nuts f.t. in m.m. size isi/iso standard, m.s. nut bsw (all sizes) isi/iso standard, s.s. bolt with nuts f.t. (all sizes) grade 304 isi/iso standard, spring washer (all sizes) flat section . isi/iso standard, copper rod size- to 2 isi/iso standard, wire nail (all sizes). isi/iso standard, s.s. botl with nut (all sizes). grade 304 isi/iso standard, s.s. washer (all sizes). isi/iso standard, nyloc nut (all sizes). isi/iso standard, brass rod all size isi/iso standard, split pin (all sizes). isi/iso standard, high tensile bolts & nut. isi/iso standard, high tensile allen key bolt (all sizes) isi/iso standard, s.s. rod all size grade 304 isi/iso standard, m.s. stud, size: 10 x 100 mm. isi/iso standard, locktite-262. isi/iso standard, s.s. plate grade- 304., size: 16 mm. x 400 mm. x 370 mm. isi/iso standard, s.s. plate size: 16 mm. x 400 mm. x 370 mm. grade 304 isi/iso standard, brass sim size: 0.05 mm. x 1 mtr. x 1 mtr. isi/iso standard, do size: 0.10 mm. x 1 mtr. x 1 mtr. isi/iso standard, do size: 0.15 mm. x 1 mtr. x 1 mtr. isi/iso standard, do size: 0.20 mm. x 1 mtr. x 1 mtr. isi/iso standard, do size: 0.25 mm. x 1 mtr. x 1 mtr. isi/iso standard, do size: 0.50 mm. x 1 mtr. x 1 mtr. isi/iso standard, h.t. counter shank screw (full thread). size: 5/8 x 2 isi/iso standard, m.s. counter shank screw, size: x 3 . isi/iso standard, s.s. stud size: 12 mm. x 50 mm., do - size: 10 mm. x 50 mm., do - size: 12 mm. x 115 mm., do - size: 16 mm. x 115 mm., m.s. counter shank bolt, size: 5/8 x 1 ., do - size: x 3 ., s.s. squire head bolt, size: 14 x 35 mm., do - size: 16 x 35 mm., s.s. counter shank bolt, size: 12 mm. x 65 mm., s.s. stud, size: 12mm. x 50 mm., do - size: 10mm. x 50 mm., do - size: 12mm. x 115 mm., do - size: 16mm. x 115 mm., counter shank bolt size- " x 1 ", m.s. round plain size- " dia, do - size- 5/8" dia, do - size- 1" dia, do - size- 1 " x dia, m.s. squre size 3" x 3" both side right angle straight size 3" x 3" square x 2mtr. long, mt&ut certificate required, -do-size 4" x 4" x 2mtr mt&ut certificate required

Central Government/Public Sector

CTN :45422329

15 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of nylock nut m10 to din : 982/iso:7040, grade 8 duly white zn plated . make; tvs/unbrako/tuff/dfl. material to be supplied by oem/ authorized dealers with authorization certificate .material tc required from oem/nabl approved lab. warranty certificate required as per irs condition . material to be supplied in standard oem's packing. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45372887

08 Jun, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of flash back arrestor(dry type) for regulator end of acetylene/lpg lines to prevent flash backs in oxy fuel system conforming to en 730/iso 5175-1/is 11006 standards with flame arrestor(fa) and non return valve(nrv) and thermal cut off valve(tv) working pressure: 1.5 bar for acetylene/5.0 bar for lpg. end connections g 3/8 lh to en 560/iso 3253 standards. make: messer(dgn fuel) or esab(protex ra) or gce(fr-34 r fuel) only. note:1) offers of oems or their authorised dealers enclosing valid authorised dealership certificate only will be considered. 2) the suppliers shall send test certificate from govt. authorised test house. in case of international brand, the test certificate from reputed institute like bam, germany is mandatory. 3) the suppliers should have equipments for testing of flash back arrestors and calibration. the purchaser has the right to inspect these installations. as per specn. en 730/iso 5175-1/is 11006 . [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45393389

15 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of set of double ended jaw spanners with deep sleeve coating (chrome vanadium steel) 6mm to 32 mm consists of : 6-7 mm = 01 nos., 8-9 mm = 01 nos., 10-11 mm = 01 nos., 12-13 mm = 01 nos., 14-15 mm = 01 nos., 16-17 mm = 01 nos.. 18-19 mm = 01 nos., 20-22 mm = 01nos., 21-23 mm = 01 nos., 24-27 mm = 01 nos., 25-28 mm = 01 nos., 30-32 mm = 01 nos.. note: 01 set consists of 12 nos. items as stated above of iso/din/bis standards and to be procured from oem/authorized dealer. test certificate to be provided from approved nabl lab. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45395497

18 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply of set of spare parts of hmt lathe & milling machine as under. one set consists of: 1. spares of hmt lathe machine model-nh-26. make -hmt or equivalent (a). hydraulic gear pump-02 nos. (b). hydraulic clutch-01 set (c). clutch plate outer (sintered)-06 nos. (d). clutch plate inner ( steel)- 06 nos.2. spares of hmt milling machine model -fn-2, make-hmt or equivalent (a). arbor support pb bush -01 nos.(b). iso taper arbor with set of spacer and two bearings bushes (32 mmx750 mm)-01 no. note: 1. firm should provide testing/guarantee or warranty certificate of spares and spares to be compatible to the hmt lathe nh-26 & hmt fn-2 milling machines. [ warranty period: 30 months after the date of delivery ] ]

CTN :45421193

18 Jun, 2026 NA

Najibabad - Uttar Pradesh

Tender For supply of hardware items - en-8 round of different size iso:c45e with mt certificate , m.s round of different size 150 630:1980 , m.s. square of different size iso 1035-1980 , m.s plain washer of different size iso-7089 , spring washer flat section of different size din-127/7980 , s.s. washer of different size. din-125a/iso-7089 , spring washer bbbb/ssss of different size din-127/7980 , aluminum rivet of different size iso 15983a , rubber joint black sheet size 1/8" iso 9631:2018 , do but size 1/16" , ...........do.......... but size 1/4" , hexa blade (miranda) size 1/2" x 12" iso-2336 part 1 & 2 , aluminum plate 8 mm , but 10 mm size , klipko make hose clamp of different size , spring steel flat 5 x 35 mm , split pin champion make of different size , valve grinding paste (emery paste) c/u make rough , valve grinding paste(emery paste) c/u make fine , emery tape carborandum make (rough) size 1" , do , but carborandum make size 1%" , do , but carborandum make size 2" , emery cloth carborandum make no.50 , do , but carborandum make no. 80 , do , but carborandum make no. 100 , red lead diwaldi make , white lead shakura make , m.seal (mahindra & mahindra make) , holdite compound in 500 gram , rustoline in 500 gram , shallack compound ellofic/pidilite , araldite (1.8 kg) , graphite powder , thread seal tape champion make size ¼"(teflon tap) , lead wire size 3mm thick , lead wire size 0.5mm thick , .ead seal , sealing wire , lead , ocktite in 50 ml. , persian blue enamel paint tube in 20ml , namda (woolen flat) size 30mm x 6'x6' , brass shim svp 14 x 48 x 5 thou , brass shim size 14" x 48 x 8 thou , brass shim size 14" x 48 x 10 thou , bravs shim size 14" x 48 x 15 thou , brass rind different sizes , brass brazing rod size 1 & 1/4 , brays connectar with nut size 38 , bras ferrule sие 3 , brass ferrule sue 1 , brass ferrule sive 14" , brass ferrule size 5 mm , brass connector size w , brass connector with nut and brass. formule size 38 , brass connector with nut and brass ferrule size w , brass connector with reducer size 3/8" x , bras nut 10mm outside thread , 5.5. plate 316 grade in all size , ss. plate 202 grade im all size , ss. rod different sizes in 304 grade , stainless steel piano wire roll , circlip in different size , steel wire rope lämm (construction 6/19) tereile strength 1770n/min usha martin make with test , certificate with ham core , good year make flat belt all sizes , duplex roller duplex cham diamond make all sizes , advani make super hood s.s. elevande size 2.30mm , advani make super bond s.s. electrode size 3.2mm , advani make super bond s. electrode se 2.5 mm , advani make super hood s. electrode size 3.2 mm , d&h makir super bond s.s. electrode size 2.5 mm (3.5kgpk) , d&h make super bond s.s. electrode size 3.15mm (4.5kgpkr) , sil bronze welding roll save 1/16 , copper rod different sizes , annahond tube in 100 gram no. 666 , annabond retainer for learing no. 412 , gates. make double wire braided hyd. hose pipe for , unloader size 1" x 2.7 mir long , painting brush 25 mm , painting beush 35 mm , painting brush 50 mm , painting brush 70 mm , painting brush 100mm , painting brush 150 mm , stuel wire brush 1 x 6" , plumber lock smr make in different sing , aligator type belt fastener stoel belt locking size no.35 , angle grinder hitachi make 4" , copper pipe/tube any size , lrb pad (glass wonl) 1640x1220x50mm (with wire netting) , m.s. connector forged 1/2"x 3/4" , teflon rod 32 mm (1%"x1 ft) , cs glove valve bhei. male socket weld class 1500%"

Central Government And Public Sector

CTN :45404607

19 Jun, 2026 NA

Bilaspur - Chhattisgarh

Tender For supply of worn wheel profile gauge, made of hardened stainless steel with laser etched permanent marking of "wheel profile size" and "name of wheel profile gauge" on each gauge. wheel profile is made from wire cut edm. all gauges have hardened 45 hrc & 4 mm thick ss plate with calibration certificate from nabl/iso accredited lab. for inspection of wheel profile of all type of wheel sets. in one set consistof following items:- 1. worn wheel profile (for bg wagon) gauge, size 29 mm, qty 01 nos, as per drg. no. 88021. 2. intermediate worn wheel profile gauge, size 20 mm, 21 mm, 22 mm, 23 mm, 24 mm, 25 mm, 26 mm, 27 mm & 28 mm, qty 09 nos(one each size), as per drg. no. wd89060/s-02 3. 140t crane wheelprofile gauge, size as per drawing, qty 01 no, drg. no. csl-3040 4.tower car mark- ii wheel profile gauge, size as per drawing, qty 01 no, drg. no. jmp/cr-46/2008 5.tower car mark- iii wheel profile gauge, size as per drawing, qty 01 no, drg. no. ga5443/jmp [ warranty period: 30 months after the date of delivery ] ]

Iso 20000 Certification Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector