Latest isolating tube Tenders | Government isolating tube Tenders

Central Government/Public Sector

CTN :43531728

02 Mar, 2026 NA

Multi City - Multi State

Tender For supply of gasket for flange welded joint (pipe to equipment) for 25 mm n.b. pipe drawing no.:-wd-83062-s-07 , alt (6) item - 1 specification:- 04-abr-2019 (rev.-2 ) [ warranty period: 30 monthsafter the date of delivery ]

Central Government/Public Sector

CTN :43531986

22 Jan, 2026 NA

Multi City - Multi State

Tender For supply of flange male connector (pipe to eqpt) 20mm n.b (70 mm pitch) to drg no icf/std-3-5- 020, item-1, alt c, as per icf specification no. icf/md/spec-166 rev 4 (latest/revision). ]

Central Government / Public Sector

CTN :43532542

09 Feb, 2026 NA

Multi City - Multi State

Tender For supply of stainless steel flange a20 for 20 nb pipe conforming to rdso spec.no. 04-abr-2019, rev.02, december,2019 to rcf drg no : rcf drg. no. cc-36674 alt : nil. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :43532548

09 Feb, 2026 NA

Multi City - Multi State

Tender For supply of stainless steel moving flange for 25 nb pipe conforming to rdso spec.no. 04-abr-2019, rev.02, december,2019 to rcf drg no : cc-36670 alt : nil. [ warranty period: 30 months after the date of delivery ]

CTN :43400565

13 Jan, 2026 NA

Jalandhar - Punjab

Tender For corrigendum : supply of pipe tc to ic , rear wind shield rh , repair kit , major seal kit steering gear box , plug oxygen sensor , master cyl power unit clutch master cyl , gasket and seal set , assy cable complete , coil ignition , tci unit , carburetor flange washer

CTN :43264781

17 Jan, 2026 NA

Pune - Maharashtra

Tender For corrigendum : supply of lv1 r72 172 35 065 bolt , lv1 r72 54 20 087 2a grip lever , lv1 r72 188 31 261 gasket , lv1 r72 175 40 051 bushing , lv1 r72 54 12 093 1 plug , lv1 r72 175 93 040sb latch , lv1 r72 5340610099731 wedge 432-21017sb , lv1 r72 172 66 250 pipe union , lv1 r72 432 85 064 gasket , lv1 r72 432 44 027 cone , lv1 r72 5330720115354 seal oil 432-63-149 , lv1 r72 172 45 116 gasket flange , lv1 r72 175 33 328 gasket , lv1 r72 em30 025 dust cover , lv1 r72 172 93 387 01 cover plate , lv1 r72 613 28 50sb a wrench torque control , lv1 r72 172 11 075 1 wedge , lv1 r72 34 07 056 lock , lv1 r72 5306720059018 bolt 172-11-131 , lv1 r72 175 91 102 nut

State Government

CTN :43525740

16 Jan, 2026 1.68 Lacs

Ambala - Haryana

Tender For amtc of ephs in sector 1 ue ambala city repair of ohsr flange pipe in ohsr at water works in sector 1 amabala city complete in all respect and all other works contingent thereto

State Government

CTN :43467490

13 Jan, 2026 NA

Delhi - Delhi

Tender For s/i/t/c of e/m equipments and allied works for newly re-bored tube well at okhla vihar near majar in okhla constituency ac-54. - supply of submersible pump set fitted with dynamically balanced ss impeller mounted on stainless steel shaft with protection sleeve having stage bowl & closed grained shorted type impeller, the pump will be directly coupled to required wet type induction motor of 7.5 hp, 15 stage, speed 2900 rpm suitable for operation of 3 phase, 415 volt, 50 hz, ac supply with efficiency 70% at following duty point: 200-125-75 lpm on 89-124-133 mtr. head.having discharge outlet 50 mm and outside dia 142 mm.make: bs/skope/ any djb approved. , supply of hut type electrical feeder pillar / fabricated with 50 x 50 x 6mm angle iron and 16 swg ms sheet with horizontal and vertical intermediate member of suitable size. i.e. 1370 mm x 760mm x 460 mm. with arrangement for mounting of switchgear and electrical energy meter i.c. painting heaving following item fitted. a) mccb 63 amp, 4pole, 415volt, 35 ka -1 no. b) rccb 63 amp, 4pole with earth fault indication protecting a circuit automatically in the event of earth leakage sensitivity 100ma, - 1 no c) fully automatic star delta starter of relay range 13-21 amp. (7.5 hp to 10 hp) 3 phase oil immersed type -1 no.d) ampere 96 x 96 mm. square shape 0-30 amp-1 no. e) voltmeter 96 x 96 mm. square shape 0-500 volt-1 no.e) indicating lamp (a set of 3 lamps) 1.setf) shunt capacitor of 10 kvar mpp type with three phase isolator with suitable banking g) motor protection assembly with earth leakage protection phase sequence corrector, single phasing, protection, overload protection, high voltage / low voltage protection time delay power on, programmable time switch i.c. r&b phase facility to change over from automatic, to manual &vice verse for up to 10 h.p -01 nos.complete wiring &installation of above accessories with required copper conductor wire and thimble etc. 01 job.make of all components: any djb approved., s/o pvc insulated and pvc sheathed cable with plain copper conductor having 3 phases, 3 core flat for submersible motor of 4 square mm size each 100 mtrs. make:grandlay / havells./any djb approved make, s/o m.s. clamp of 600 mm length duly fabricated out of 12.5 mm thick 75 mm wide, m.s. plate for holding the pipe of 50 mm dia., s/o double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends with slot of submersible cable. make: tata/ jindal./any djb approved make, s/o/ tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of gi pipe 50 mm dia., s/o gi 90 bend of size 50 mm dia having both side flange (heavy duty)., supply of ms nut bolts off size as per requirement., s/o rubber packing for 50 mm dia flange., fabrication and supply supply of bore cover approx size 1x1 made out from 6mm thick m.s. sheet in 2 halves and a circular hole in centre 3-1/2 dia. with locking arrangement by nuts and bolt. , earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., installation of t/well by lowering of sub p/set with all allied above items. this includes installation and grouting of panel boards with all electrical wiring & cabling at site. all tools & tackles i/c. tripod chain pulley blocks etc. shall be arranged by the firm. this includes testing & commissioning of t/well on load at site i/c. cartage, loading & unloading of material. it also includes a trial run of 30 hrs operation successfully by the firm. all required civil work included in the scope of work.

CTN :43378445

12 Jan, 2026 NA

Delhi - Delhi

Tender For bid to ras supply of mm dia , water level indicator digital 10 level , ci foot valve 200 mm dia , submersible cable 4 sqmm 3 core , float valve epoxy coated 15 mm , gun metal hydrant valve 63 mm , float valve epoxy coated 50 mm , gi socket medium grade 80 mm , brass nozzle 63 mm dia , ci non return valve 100 mm dia , ms flange 100 mm dia bore , lead pig bar , submersible cable 2 decimal 5 sqmm 3 core , pvc insulated cable 16 sqmm single core , self closing tap cp 20 mm , ci foot valve 150 mm dia , float valve epoxy coated 25 mm , cable xlpe 4 core 16 sqmm , ci butterfly valve 80 mm dia , rubber hose reel 20 mm dia , single phase preventor , soda ash , air release valve 100 mm dia , cable xlpe armoured hd al 3 decimal 5 core 25 sqmm , alum crystal , strainer 80 mm bore , spun yarn , relay 9 to 14 amp type ml , float valve epoxy coated 40 mm , ms pipe medium grade 200 mm bore , power contactor ml 1 decimal 5 tp 415v , changeover switch 4p ss enclosure 100a , nuts bolts washers 25 to 150 mm , lead wool , ci foot valve 80 mm dia , timer et 100 240 or 415v , bib tap cp with butterfly handle , gm gate valve 15 mm bore , power contactor ml 2 415v , amp meter digital off size , cable xlpe 4 core 25 sqmm , copper lugs or thimble off sizes , brass nozzle 20 mm dia , ci non return valve 80 mm dia , ph meter , pvc insulated cable 6 sqmm single core , pvc lt type holder aluminium rod 50mm , volt meter 0 to 500 volts , pvc insulated cable 4 sqmm single core , bearing grease , gland packing 10 mm , ms flange 300 mm dia bore , ms flange 250 mm dia bore , gland packing 6 mm , ms flange 200 mm dia bore , ms flange 150 mm dia bore , air release valve 80 mm dia bore , ms flange 80 mm dia bore , push button switch start or stop , battery lead off sizes , pvc insulated cable 1 decimal 5 sqmm single core , submersible cable 1 decimal 5 sqmm 3 core , mcb spn 32 amps , pvc insulated cable 2 decimal 5 sqmm single core , rubber tyton joint 100 mm , rubber tyton joint 150 mm , rubber tyton joint 200 mm , rubber tyton joint 250 mm , ceiling rose 3 terminal , gi pipe medium grade 80 mm bore , switch socket combo 5 amp 2 in 1 , switch piano flush 15 amp , switch socket combo 15 amp 2 in 1 , socket outlet 15 amp flush type , socket outlet 3 pin 5 amp flush type , switch piano flush 5 amp , supply only mcb sp 30 amps , led lamps 12w 240vcopper sulphate, ci non return valve 200 mm dia, ci non return valve 250 mm dia, strainer 100 mm bore, fasd ml 4 in ss enclosure, ci non return valve 150 mm dia, ci non return valve 400 mm dia, mccb tp 100 amp 415 volts 36 ka, changeover switch 4p ss enclosure 415v 400a, gi pipe medium grade 40 mm bore, gm gate valve 25 mm bore, ci sluice valve 300 mm bore, mccb tp 63 amp 415 volts 36 ka, float valve epoxy coated 20 mm, changeover switch 4p ss enclosure 200a, gi pipe medium grade 20 mm bore, fasd panel 50 hp, mccb tp 630 amp 415 volts 36 ka, gm gate valve 50 mm bore, gm gate valve 20 mm bore, power contactor ml 10 tp 415 volts, cable xlpe armoured hd al 3 decimal 5 core 50 sqmm, air release valve 150 mm bore, ci butterfly valve 150 mm dia, mccb tp 200 amp 415 volts 36 ka, power contactor ml 6 tp 415 volts, ci butterfly valve 100 mm dia, ci sluice valve 200 mm bore, power contactor ml 4 tp 415 volts, led tube light fitting 20w, battery 12v 180 ah, fasd panel 15 hp, power contactor ml 3 tp 415 volts, cable xlpe 3 decimal 5 core 35 sqmm, pvc insulated copper cable 25 sqmm single core, submersible cable 6 sqmm 3 core, on load changeover switch 100 amp, ms pipe medium grade 300 mm bore, air release valve 200 mm dia, water meter 100 mm bore, ci butterfly valve 250 mm dia, //bid details2 / 98

CTN :43334968

14 Jan, 2026 NA

Trivandrum - Kerala

Tender For corrigendum : supply and installation of plumbing items for the construction of isolation wards in kerala -zone 2. - plumbing items, providing and fixing white vitreous china coupled type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: w.c. pan with isi marked white solid plastic seat and lid, providing and fixing pedestal type wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: white vitreous china pedestal type wash basin with a 15 mm c.p. brass pillar tap, providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete., supplying and fixing stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge., supplying and fixing cp towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge., supplying and fixing cp health faucet superior quality ( jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge., supply,fixing, testing and commissioning angle valves make: kohler or equivalent, supply,fixing, testing and commissioning at site c.p. brass bib cocks long noze with wall flange make: kohler or equivalent, providing, fixing, testing and commissioning at site in position floor trap, with stainless steel grating, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 15 mm nominal outer dia pipes, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 20 mm nominal outer dia pipes, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 25 mm nominal outer dia pipes, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-i

Isolating Tube Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government / Public Sector

State Government

State Government