Latest jaw adapter Tenders | Government jaw adapter Tenders

Central Government/Public Sector

CTN :45682151

08 Jul, 2026 NA

Delhi - Delhi

Tender For supply of special clamp for holding pedestal jaw adapter as per sketch attached. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45675342

06 Jul, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of others - scrap narrow jaw adapter (1)lot no-1305202603, adapter (narrow jaw), 3000nos, 35.250mt,location-near old dry office right side of pathway

CTN :45665393

23 Jul, 2026 NA

Rourkela - Odisha

Tender For supply of aoh kit for pantograph type ccpl make ir03h, spec. no.: rdso/2016/el/smi/0292, [rev-0], dtd: 27/6/2016. aoh overhauling kit for pantograph type ccpl ir03h, set consisting of 19 items in 38 nos. as follows: [1] key washer, part no.c01550=02 set. [2] piston packing ring , part no.c01870= 01 set. [3] valve, part no.-c 01920=01 set. [4] joint for valve, part no.-c 01930=01 set. [5] valve guide, part no.-c 01940=01 set. [6] piston ring, part no.-c 01950=01 set. [7] o ring, part no.- c 01930=01 set. [8] gasket, part no.-c 019100= 02 set. [9] spring, part no. c0h15660=02 set. [10] insulating washer, part no.- c 015650 =04 set. [11] bush, part no.- c 01770=02 set. [12] screw with nut, part no.- c0h630=02 set. [13] split pin 4x56, part no.-c00180001=02 set. [14] split pin 1.5 x 45, part no.-c001930001=02 set. [15] spilt pin 3 x30, part no.c0060003=06 set. [16] split pin 2.5 x30, part no.- c0090004=02 set. [17] split pin 2.5 x30, part no.- c0040006=02 set. [18] split pin 2.5 x30, part no. c00120015=02 set. [19] split pin 4 x 56, part no.-c00170001=02 set. [ warranty period:30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45632042

06 Jul, 2026 NA

Ganderbal - Jammu And Kashmir

Tender For supply of cotton cloth , nawara tape 1inch35 m long. , press card board gatti , hv bushing , bakelite tubes off sizes 8 to 14mm dia 1 mtr long , 3 bladewall mount fan , lethoride paper 10 and 20 mil , press card board soft calendared solid 1mmor2mmor3mm as per sample , insulating gum , 11kv polomeric composit pin insulator with pins12 kv , ht bush , manila rope

Central Government/Public Sector

CTN :45616252

14 Jul, 2026 NA

Ajmer - Rajasthan

Tender For supply of point insulation complete set as per rdso/spn/168/2005 revision 2.0 or latest for 1.switch bracket d bracket insulation for irs point machine - one set comprises of (a)side plate lh to drg.no. s-3266 - 1 no. (b) side plate rh to drg.no. s-3265 - 1 no. (c)insulating bush to drg.no. s-23199 - 4 nos. (d) insulating washer to drg.no. s-8640 - 4 nos., 2. split-stretcher bar 2.1 insulation for leading stretcher bars (bg) each set comprising of (a) insulating plate for leading insulated stretcher bars bg as per rdso drg.no. t-10384 -2 nos. (b) insulating bushing for leading insulated stretcher bars for bg as per rdso drg.no. t-10368- 4 nos. (c) insulating washer for insulated stretcher bar bg as per rdso drg.no. t-10371 - 6 nos. 2.2 insulation for following stretcher bars bg. each set comprising of: (a)insulating side plate for insulated stretcher bars bg as per rdso drg.no. t-10367 -3 no. (b) insulatingbushing for insulated stretcher bars bg as per rdso drg.no.. t-10368 - 6 nos. (c)insulating washer forinsulated stretcher bars bg as per rdso drg.no. t10371 - 12 nos & 3. gauge tie plates (52 kg/60kg as per site requirement) insulation for (bg) complete with insulating bush and washer each set comprising of: (a) insulating plate for insulated tie plate bg as per rdso drg.no. t-10372-1 no. (b) insulating bushing for insulated stretcher bar bg as per rdso drg.no. t10368 - 3 nos. (c) insulating washer for insulated stretcher bar bg as per rdso drg.no. t-10371 - 6 nos. spec:rdso/spn/168/2005 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45610472

24 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of set of insulating bush 08 x 10.00 high insulation hard epoxy fibre for temperature sensor assembly of traction motor type 6fra6068. as per clw drg. no- 4twd.096.163, alt-4 or latest ref.-03. each set consisting of 01 item 02 nos only. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45583243

06 Jul, 2026 NA

Thiruvananthapuram - Kerala

Tender For supply of nylon 66 point insulations complete set with rdso spec no-irs s 40/84 or latest consists of 1.gauge tie plate insulation one set (insulating plate drg no. t-10372=01 nos, insulating bush drg no. t- 10368=03 nos,insulating washer drg no. t-10371=06 nos) 2. d bracket insulation one set (insulating plate (rh) drg no. s-3265=01nos, insulating plate (lh) drg no. s-3266=01 nos, insulating washer drg no.s-8640=04nos, insulating bush drawing no.s- 23199=04nos) 3.stretcher bar insulation one set (insulating plate drg no.t-10367=01 nos, insulating bush drg no.t-10368=02 nos, insulating washer drg no.t-10371=04nos) 4. l-bracket insulation one set (insulating plate drg no.s-8804=01 nos, insulating washer drg no. s -8640=02 nos, insulating bush drawing no.s-8813=02 nos) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45597664

20 Jul, 2026 NA

Coimbatore - Tamil Nadu

Tender For items of insulating components for ground connections of 220mm stroke point machine in set. one set consists of: 1) insulating bush for switch extension bracket to drg.no. s-23199: 04 nos. 2) bush for drive rod lug to drg. no. rdso s 3463: 1 no. 3) insulating plate rh to drg. no. s 3592: 01 no. 4) insulating plate lh to drg. no. s-3593: 01 no. 5) insulating washer to drg. no. s-8640: 04 nos. 6) drive rod insulation washer to drg. no. cwm 10323: 2 nos. 7) crank bush to drg. no. s 8912 alt-2: 6 nos. 8) insulation plate for gauge tie plate to drg. no. cwm 09723: 03 nos. 9) insulating washer for gauge tie plate/stretcher bar to drg.no. cwm 09623 : 22 nos 10) insulation bush to drg.no.cwm 09923 : 11 nos 11) collar bush small to drg.no. cwm 05822alt-1 : 06 nos. 12) collar bush large to drg.no. cwm 05722 alt-1 : 06 nos. note: a) each set to be packed in suitable polythene covers in sealed condition. b) material test certificate from nabl accredited laboratory shallbe submitted along with each batch of supply. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max8 lacs ] ]

Central Government/Public Sector

CTN :45597673

22 Jul, 2026 NA

Coimbatore - Tamil Nadu

Tender For items of insulating components for ground connections of 143mm stroke point machine in set. one set consists of: 1) insulating bush for leading stretcher bar to drg. no. s-8813: 02 nos. 2) insulating bush for switch extension bracket to drg. no. s-23199: 04 nos. 3) insulating plate rh to drg. no. s 3265 alt-1: 01 no. 4) insulating plate lh to drg. no. s-3266 alt-1 : 01 no. 5) insulating washer to drg. no. s-8640 : 06 nos. 6) crank bush 'b' to drg. no. s 8912 alt-2 : 04 nos. 7) insulation plate for gauge tie plate to drg. no. cwm 09723 :02 nos. 8) insulating washer for gauge tie plate/stretcher bar to drg. no. cwm 09623 : 28 nos. 9) insulation bush for gauge tie plate/stretcher bar to drg. no. cwm 09923 : 14 nos. note: a) each set to be packed in suitable polythene covers in sealed condition. b) material test certificate from nabl accredited laboratory shall be submitted along with each batch of supply. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max8 lacs ] ]

Central Government And Public Sector

CTN :45588161

27 Aug, 2026 NA

Dibrugarh - Assam

Tender For supply of narrow jaw adapter class "e" 6"x11". drawing - rdso drawing no : wd-89067-s/9, alt-12. mat. spec. - as per drawing with latest revision and amendments and conforming to rdso str no. ab/rb-40-2016, rev-2 of june 2021, with latest revision and amendments. [ warranty period: 48 months after the date of delivery ] ]

Jaw Adapter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors