Latest jaw chuck Tenders | Government jaw chuck Tenders

State Government

CTN :45691035

30 Jun, 2026 NA

Ropar - Punjab

Tender For procurement of miscellaneous spares for mounting various actuators, solenoids, air limit switches, set of o-ring -- system ggsstp, ropar tender enquiry - grub screw with nut (ht) for mounting pd-28 actuator. size 10x40nim, nut bolt (ht) for mx-450 and cylinder body. size8x25 mm, dowel pin (ht for lock air cylinder assembly. size 10x50 mam, l-key bolt (cs) for air limit switch and cylinder. size 6x40mm., cylinder lock of esp and pd-15(cs). id-20mm and thickness imm, l-key bolt(cs) to lock the stopper of cylinder. size 6x30mm, actuator lock pd-28(cs), id-23mm and thickness-imm, actuator lock pd-50, pd-75 and cylinder lock of apη ducts(cs) id-33mm and thickness imm, l-key bolt for cylinder.6x40mm, screw with nut for mounting pressure switch. size(cs) 3x40mm., grub screw for mounting pd-50 & pd-75. size 12x50mm, nut-bolt(cs) for mounting electrical limit switch (4 to 7 fields). size 4x50mm., grub screw with nut (cs) for mounting electrical limit switches of pd-28, pd-50 & pd-75.size 4x25mm, nut bolt(cs) for mounting solenoids. suze 3x35mm, l-key bolt for air limit switch. size 3x40mm., l-key bolt(cs) for air limit switch. size 3x200mm, nut bolt (ht) for air limit switch. size 12x50mm., l-key bolt for air limit switch. size 4x35mm, l-key bolt(cs) for air limit switch. size 4x20mm, cylinder pin. drawing as perannexure-7, quick exhaust valve diaphragm of size 65mmdiameter thickness-2mm, material synthetic rubber, air limit switch o-ring of synthetic rubber., set consists of, size id-hom., thickness 2mm, 1.size: id = 1 , thickness 2mm, hsn code 40169320, screw with nutcs) 4x25 mm, nut-bolt (h.t) 12x25 for mounting mx-450, cylinder pin (160x250mm), drawing as per annex.-4, nut-bolt(h.t) 10x35 for coupling mx-450, l-key bolt(cs)(6x70mm) for poppet valve., diaphragm for quick exhaust valve diameter 6.5mm &thickness imm., cylinder spacer lock. drawing as per annex-2, stud for pd-28 mounting(10x12mm diameter-25 x40mm length(grub screw), stud(cs) for pd-50 and pd-75 mounting(12x14mm) diameter-10&75mm, stad gir pd-15 mounting(8x10mm) diameter-10x45mm length, hex nipple w(brass), hex nipple w"(ss), hex nipple "x3/4"(85), blow valve cup washer 100 nb drawing as per annex-6., blow valve disc 100 nb drawing as per annex-5, blow valve cup washer 50 nb. drawing as per annex.-1., blow valve disc 50 nb drawing as per annex.-3, stud with nun (cs) (8x35 mm) and overall 50mm length., vent filter sol viv top plate, drgas per annexure-8, solenoid valve rotex make" model 51400-6-20, solenoid valve repair kit

CTN :45695412

15 Jul, 2026 NA

Multi City - Andhra Pradesh

Tender For supply of esp spares for emitting frame system of unit-3/sdstps -0 supporting beam,drg no. 2-79-021-01451 (item no.01 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), frame part top(6-tube assembly), drg no.2-79-021-00880 (item no.02 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), frame part top(7-tube assembly), drg no.2-79-021-00880 (item no.03 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), suspension rod assembly), drg no.3-79-021-00245 (item no.05 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), frame part bottom(4-tube assembly), drg no.2-79-022-00881 (item no.13 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), frame part bottom(7-tube assembly), drg no.2-79-022-00881 (item no.14 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), frame part bottom(8-tube assembly), drg no.2-79-022-00881 (item no.15 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), frame part middle(4-tube assembly), drg no.2-79-032-00882 (item no.17 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), frame part middle(7-tube assembly), drg no.2-79-032-00882 (item no.18 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), frame part middle(8-tube assembly), drg no.2-79-032-00882 (item no.19 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257), vertical stay, drg no.3-70-032-01280 (item no.30 of frame of emitting system (esp) as per apgenco/eic drg.no.1-79-121-04257(is 1239)

State Government

CTN :45670796

24 Jul, 2026 20.51 Lacs

Multi City - Telangana

Tender For supply of certain spares for maintenance of esp of boiler maintenance division. - inner arm with bolt and nut for jointing two port, plane bearing assembly duly machined with 02 bolts,nuts and 2 nos.pins as per sample for collecting electrode rapping system of esp type:faa-9x37.5m-2x96135-2, outer arm for collecting rapping mechanism (big roller), outer arms for emitting rapping mechanism (small roller)

CTN :45433162

29 Jun, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : supply of tsc-a630-950b-4 power operated 3 jaw chuck dia 200 , tsc-b678-970a-3 hydraulic rotating cylinder assy

CTN :45626359

04 Jul, 2026 NA

Bokaro - Jharkhand

Tender For esp spares for tpp boilers - item to be supplied, cat. no: 08520203027outer arm with inner arm for colllecting rapping mechanism, cat. no: 08520203030outer arm with inner arm for emitting rapping mechanism, cat. no: 08520203006eerm rapping shaft, cat. no: 08520203031big pin wheel, cat. no: 08520203032small pin wheel, cat. no: 08520203013emitting drive vertical shaft, cat. no: 08520203024c i bearing, cat. no: 08520203002shock anvil, cat no: 08520203060geared motor with gearbox for emmitting rapping drive (vertical flange mounted), cat. no: 08520203042geared motor with gearbox for collecting rapping drive (horizontal foot mounted), cat. no: 08520203037shaft insulator, cat. no: 08520203053support heater, cat. no: 08520203054hopper heater, cat. no: 08520203009collecting rapping shaft, cat. no: 08520203067emitting carbon / graphite bush, cat. no: 08520203062cerm outer arm, cat. no: 08520203063eerm outer arm, cat. no: 08520203039screen-a for inlet gd system, cat. no: 08520203017screen- b for inlet gd system, cat. no: 08520203021u profile (guide plate) for collecting electrode, cat. no: 08520203025locking / adjusting ring of bearing for cerm, cat. no: 08520203026shim plate for crm bearing, cat. no: 08520203033top shock bar guide, cat. no: 08520203012emitting electrode - spiral

Central Government/Public Sector

CTN :45302452

29 Jun, 2026 NA

Goindwal - Punjab

Tender For corrigendum : supply of self centering three jaw chuck 315mm material code vp8440010010 , holder th sel 2525 m22-lh 5 pitch material code aa6262280057 , inserts for threading bar 25 mm 5 pitch material code vp6267550060 , grooving tool holder 25x25 left straight material code aa6266050048 , grooving tool holder 25x25 right material code aa6266050056 , inserts for grooving tool 20x20 6 mm material code vp6267550010 , inserts for grooving tool 25x25 5mm material code vp6267550028

corporations/Associations/Others

CTN :45601972

02 Jul, 2026 25.01 Lacs

Bardhaman - West Bengal

Tender For supply of esp spares for dstps u2 overhauling d d - cerm shaft assy (1 set = shaft end 2 nos. + d 50 shaft 4 nos. + sleeve 4 nos. + set ring 4, nos.). esp type:- faa-10x 45h- 2x90140-2, for esp of 500mw. shaft-en-24, gd rapping shaft assembly for esp 500 mw (1 set = shaft end 1 no. + d50 shaft 2 nos. +, sleeve 2 nos. + set ring 2 nos) esp type:- faa-10x 45h- 2x90140-2, for esp of 500mw. shaft-, en-24, eerm vertical shaft assembly d-40 for esp 500 mw (1 set = shaft 3 nos) esp type:- faa-10x, 45h- 2x90140-2,for esp of 500mw. shaft-en-24, eerm d-50 shaft assembly for esp 500 mw(1 set =shaft 2 nos.+ sleeve 1nos. + set ring 2, nos. +key 1 nos.) esp type:- faa-10x 45h- 2x90140-2. for esp of 500mw. shaft-en-24, plain bearing,mat: c.i. gr-25 esp type:- faa-10x 45h- 2x90140-2, inner arm for cerm/eerm/gdrm outer arm hammers (2 half with all nuts and bolts;, flat - ms is 2062) esp type:- faa-10x 45h- 2x90140-2, outer arm for collecting rapping system, roller wheel- en-08, pin -en-24, arm and washer- ms is, 2062 esp type:- faa-10x 45h- 2x90140-2, outer arm for emitting rapping, mechanism, roller wheel- en-08, pin -en-24, arm and washer- ms is 2062esp, type:- faa-10x 45h-2x90140-2, pin wheel big for eerm 500 mw, material:c-45 & pin-en-24 esp type:- faa-, 10x 45h- 2x90140-2, pin wheel small for eerm 500 mw mat: plate (ms, is 2062), round teeth (en-24), esp type:- faa-10x 45h- 2x90140-2, shock pad, en-24 esp type:- faa-10x 45h- 2x90140-2, thrust pad (of thrust bearing) for eerm esp type:- faa-10x 45h- 2x90140-2, material: en-, 24, set ring, material: en-8 esp type:- faa-10x 45h- 2x90140-2, thrust bearing for eerm, esp type:- faa-10x 45h- 2x90140-2, material: en-24, seam for plain bearing adjustment(2 mm) esp type:- faa-10x 45h- 2x90140-2, round cross section. non asbestosrope of size 8 sqmm fors ealing/packingpurpose. capcity upto 250, degree celsius, square cross section. non asbestos rope of size 25 sq mm for sealing/packing purpose.capcity upto, 250 degree celsius, guide angle 75x50x6mm for esp shock bars, length 5000mm, u slot at 300mm is2062 e250a esp, type:- faa-10x 45h- 2x90140-2, m12×50mm hex head ht bolt and nut with washer for esp, high tensile hexagonal bolts (metric thread) and nut with washer, size- m16 x 50 (full, threaded) bolt grade- 10.9 as per is:1367 nut grade- 10 as per is:1367, high tensile hexagonal bolts (metric thread) and nut with washer, size- m16 x 100 (full, threaded) bolt grade- 10.9 as per is:1367 nut grade- 10 as per is:1367