Latest jaw spanner Tenders | Government jaw spanner Tenders

State Government

CTN :45655945

06 Jul, 2026 24.99 Lacs

Dapodi - Maharashtra

Tender For corrigendum : supply of handpump spare parts at pune zp - supply of handpump spare parts, die set 12mm with handle & bits, hydraulic vice 32 mm., heavy duty clamp 32 mm, heavy duty clamp 65 mm, connecting rod vice, pipe lifter spanner for 32mm n.b.pipe., pipe wrench 300 mm, pipe wrench 450 mm, pipe wrench 600 mm, pipe wrench 900 mm, double ended open jaw spanner 17 * 18 in c.v. steel, hacksaw frame, pump bucket (nitrile) for deepwell hand pump(is: 15500 part 7), sealing ring for deepwell handpumps (is: 15500 part 7), hex nut with bolt m 12 * 40, handle axle along with nut & washer for deepwell hand pump (is: 15500 part 4), single side shielded bearing confiming to is: 15500 part 4 suitable for above handpumps, chain nut with bolt m-12x40 (is: 15500 part 4), chain with coupling for deep well hand pump, head for deepwell hand pump (is: 15500 part 4), third plate suitable for deepwell hand pump (is: 15500 part 4) (im-ll), water tank for deepwell hand pump (is: 15500 part 4) (im-ll), connecting nrod of 12 mm dia. x 3 mtr. length, i.s.i.marked galvanized steel tubes as per i:s 1239 ( part-1) /2004 amdt.1 to 4 scrwed at both ends as per i:s 554/1999 ( reaffirmed 2004) . one end socketed with isi marked socket as per is:1239 ( part -ii)/1992 ( reaffirmed 2003) and other end protected with plastic thread protector medium class , bore size (nominal)diameter 32 mm , length 3 meter, cylinder assembly i.m.ii, cylinder body with brass liner for deepwell hand pump (is: 15500 part 5), reducer cap for deepwell hand pump (is: 15500 part 5) (im-ll), upper valve along with rubber seat for deepwell hand pump (is: 15500 part 6) (im-ll), upper valve assly suitable for deep well hand pump (im-ll) (is: 15500 part 6) (im-ll), lower valve assembly i.m.ii, hacksaw blade (high speed steel), spacer g.m. i.m.ii, rubber seat lower valve (im-ll), rubber seat upper valve (im-ll)

corporations/Associations/Others

CTN :45737882

15 Jul, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of ring spanner size 6 x7 make taparia , ring spanner size 8 x 9 make taparia , ring spanner size 10 x 11 make taparia , ring spanner size 12 x 13 make taparia , ring spannersize 14 x 15 make taparia , ring spanner size 16 x 17 make taparia , ring spanner size 18 x 19 make taparia , ring spanner size 20 x 22 make taparia , ring spanner size 21 x 23 make taparia , ring spanner size 24 x 27 make taparia , ring spanner size 25 x 28 make taparia , ring spanner size 24 x 26 make taparia , ring spanner size 30 x 32 make taparia , ring spanner size 32 x 36 make taparia , d spanneer size 6 x 7 make taparia , d spanneer size 8 x9 make taparia , d spanneer size 10 x 11 make taparia , d spanneer size 12 x 13 make taparia , d spanneer size 14 x 15 make taparia , d spanneer size 16 x 17 make taparia , d spanneer size 18 x 19 make taparia , d spanneer size 20 x 22 make taparia , d spanneer size 21 x 23 make taparia , d spanneer size 24 x 27 make taparia , d spanneer size 25 x 28 make taparia , d spanneer size 24 x 26 make taparia , d spanneer size 30 x 32 make taparia , d spanneer size 32 x 36 make taparia , nose pilier inner outer 10 inch , circlip plier , allen key set in mm size , measuring tape 5 meter lenth , tin cutter , pipe wrench 12 inch , adjustable wrench 6 inch , adjustable wrench 10 inch , line tester yellowe b13 , screw driver 905 i make tapria , screw driver 974 make tapria , cambination spanner set of 12 pcs make tapria , 1812 ring spanner set of 12 6mm to 32 mm make tapria , tubular box spanner set t512p 12pcs make tapria , socket set 23 pcs 06-32 size mm make tapria , screwdriver t-20 make tapria , socket set 14 inch drive 46 pcs taparia sa46 , anlog magger 05 kv , hammering spanner 32 mm , hammering spanner 36 mm , hammering spanner 41 mm , hammering spanner 46 mm , hammering spanner 50 mm , hammering spanner 55 mm , hammering spanner 60 mm , allenkey set in inch , pipe wrench 24 inch , adjustable slide wrench 12 inch //bid details 2 / 44

Central Government/Public Sector

CTN :45559660

07 Jul, 2026 NA

Medak-T - Telangana

Tender For corrigendum : tender for supply of torque wrench set , spanner set , open ended spanner set , double ended ring spanner , single ended open jaw spanner , spanner set

CTN :45197714

29 Jun, 2026 NA

Imphal - Manipur

Tender For bid to ras supply of light duty hexagonal socket set 6 to 22 ratchet , heavy duty hexagonal socket set 24 to 50 set of 10 , double end open jaw spanner 6 to 32 set of 12 , pipe wrench set of 4 8coma 10coma 14 and 18 inch length , pipe wrench 24 inch , allen key set 3 to 12mm set of 10 , piston ring expander set of 2 small and big , piston ring compressor , torque wrench 25 to 150 lbs , ball peen hammer 300 gms with wooden handle , ball peen hammer 600 gms with wooden handle , inner circlip plier 7 inch set of 4 , external circlip plier 7 inch set of 4 , hyd jack 10 ton cap with lever , hyd jack 20 ton cap with lever , cold chisel set of 5 , box spanner 27 af , heavy duty pipe wrench hpw 36 , cordless hand drill 18v , angle grinder 750w , long nose plier size 4 pt 5 inch set of 6 , cutting plier size 8 inch set of 3 , adjustable wrench size 12 inch , screw driver slotted head set of 5 , screw driver philips head set of 5 , oil filter remover , cantilever tool box 18 inch x 8 inch x 8 inch , heavy duty socket size 33mm , heavy duty socket size 34mm , double faced sledge hammer with hickroy wooden handle ) /bid number : gem/2026/b/7465342 * /dated: 14-05-2026 & & / bid document 1 / 33

State Government

CTN :45670395

02 Jul, 2026 5.00 Lacs

Kolhapur - Maharashtra

Tender For procurement of 13 nos. of electrical safety tools and personnel protective equipment (t and p) for technical employees under jaysingpur division of kolhapur circle - h.t. detector- , ladder , hand glove , double ended open jaw spanner set of 8 nos , tree cutting m/c petrol , box spanner set- 8, 10, 12, 14, 16, 17, 19, 22 & 24 mm as per ies standard with toomy bar , tong tester with multi-meter , led rechargeable torch , axe , ht para tap , neon tester , d.o operating rod (telescopic type)

Central Government/Public Sector

CTN :45702769

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. and u/s tools scrap such as double end spanner, adjustable spanner, die spanner, monkey spanner, ring spanner, t spanner, box spanner and all types of spanners, allen keys, cutting pliers,handoperated oil pump, screw driver, hacksaw frame & blades,hand cuffs,cash chest,hammer ball,hardness tester,, slege hammer, nose pliers, pipe wrench,ball pen hamer,cutting piler,chisel long/short,torque wrench,electrical tools, instruments, gauges with or without wooden handles,adjustable tie rods,allenkeys.allen bolt bor lhb,double leg chain,flat file,high tensile bolt,hydraulic nut,hallow adopter for dm,hand hoe,shovel,adjustable tie rod,ratchet type torque wrench,single pully block,motor pan iron,fth pipe,carbide tipped tools,steel lettr punch, pulllift,allenkey,allen socket,box spanner tubular and other,foot ruler,measuring tape,open jaw spanner,ring spanner,ratchet box,spirit level,screw driver,screw fixing cgr,vice grip plier,pulley block single sheave, hand operated pulling and lifting machine,grease gun,punches,hand crimping, bi hexagonal socket, water pump pliers, wrench coach double pliers, faring tool, hand barrel pump, hydraulic crippling tools,sledge hammer,pipe wrench, defective damaged iron tools,counter weight, , chisels,manual weighment tripod, pull lift with or without chain, weighing buds, tirfor, come along clamp, scale counter w/o nfs, torque wrench and all types of wrenches, augars, bearing puller,oil can,weight metric, iron plair, beater, crow and claw bars, mamooty,manual tripod weights, manual weighning scale, hydraulic pallet truck,ht vcb panel and lt panel released items, barrel pump, tommy bar,ratchet, tong smith, chiesel,hydraulic jack trolley, jig saw blade, circular saw blade, scissor, hooks, measuring canes, pneumatic riveting gun, drill sleeve, tool holder, inside, outside micrometres, all types of gauges,fire buckets,fire bucket stand, handle tap,platofrm trolley, grease gun adopter, spikes extractor, metric weight with handle, steel letter punch and all types of punches, all types of files, pulley puller , blower, hand driller of sorts and sizes and all other scrap tools received from different departments in ferrous nature with/without attachment of wood/plastic handle. pl.no. 98090616. custodian: cdms-rsf-gsd-per. note: 1) any aluminium/brass items or hss tools(drill bits/saw) found during delivery should be handed over to custodian. 2) empty barrels/boxes/containers, gi/any locks, electronic weighing machine, should be handedover to the custodian. location: (1)entrance of old rsf ward annexe,(2)old rsf ward annexe(rhs)

CTN :45280134

25 Jun, 2026 NA

Coimbatore - Tamil Nadu

Tender For corrigendum : supply of 6x7 ring spanner , 6x7 open spanner , 8x9 ring spanner , 8x9 open spanner , 10x11 ring spanner , 10x11 open spanner , 12x13 ring spanner , 12x13 open spanner , 14x15 ring spanner , 14x15 open spanner , 16x17 ring spanner , 16x17 open spanner , 18x19 ring spanner , 18x19 open spanner , 20x22 ring spanner , 20x22 open spanner , 21x23 ring spanner , 21x23 open spanner , 24x26 open spanner , doube hand ring spanner 24x26 for wagon , 24x27 ring spanner , 24x27 open spanner , 25x28 ring spanner , 25x28 open spanner , 30x32 ring spanner , 30x32 open spanner , 32x24 ring spanner , 32x24 open spanner , 34x38 ring spanner , 34x38 open spanner , 36x41 ring spanner , 41x46 ring spanner , 41x46 open spanner , hammering spanner ring 30 , hammering spanner ring 32 , hammering spanner ring 34 , hammering spanner ring 36 , hammering spanner ring 38 , hammering spanner ring 41 , hammering spanner ring 46 , hammering spanner ring 50 , hammering spanner ring 60 , master valve open or close rod 1 mtr length x 30cm top for wagon , bottom rod 40 for wagon , shoe handle brush , 9 inch crate opener , 16oz claw hammer with fiberglass handle , common knife 5 inches 3by4 inch blade 10 inches 3by4 inch oal , 12 inch groove joint plier , 7 inch long nose pliers with cutters , 8 inch combination pliers , deck scraper , 1.5 inch blade x 15 inch long , spray booth scraper , 3 inch blade x 9.25 inch long , std screwdriver 5 by 16 inch tip , 3 inch screwdriver , 12 inch tin snips , 8 inch adjustable wrench , 12 inch adjustable wrench , 14 inch pipe wrench aluminium , 12 inch bung wrench fits 0.75 inch x 2 inch , 26 pcs tool set

State Government

CTN :45387434

23 Jun, 2026 NA

Multi City - Telangana

Tender For corrigendum : tggenco-ytps(5x800mw)-supply of various t and p items required for unit-1 and 2 turbine maintenance divisions of stage-i of ytps. - tool kit, tool kit, complete set of taparia tw250 torque wrench, sq.dr.torq. wrench, taparia make sockets set, taparia make long nose plier, taparia make center punch, hole punch set, adjustment spanners, adjustment spanners, spanner, single open jaw, single end open jaw spanner(ribbed), single end open jaw spanner(ribbed), single end open jaw spanner(ribbed), spanner set,double open end, taparia make heavy duty pipe wrench, taparia make heavy duty pipe wrench, file,round, file,half round, tin cutter with spring, chissels 8 inch, ring spanner, d spanners set, ring slugging spanner, ring spanner, ring slugging spanner, ring spanner, ring spanner, ring spanner, ring spanner, allen head socket, allen head socket, impact socket, impact socket, impact socket, impact socket, impact socket, impact socket, impact socket, impact socket, impact socket, impact socket, impact socket, impact socket, impact socket

CTN :45576617

02 Jul, 2026 8.00 Lacs

Bagpat - Uttar Pradesh

Tender For tender for supply of blue paste tube , 15 ml camel make , holdtite , 500gram , grinding wheel ag-4 bosch make , buffing wheel ag-4 bosch make , cutting wheel ag-4 bosch make , angle grinder ag-4 bosch or dewalt make , pather tod tungsten carbide tip , carbon brush for ag-4 grinder , carbon brush for ag-7 grinder , pipe wrench 18 inch , taparia make , pipe wrench 24 inch , taparia make , sly wrench 24 inch , taparia make , hammering spanner size 36 mm , taparia make , chain block capacity 5ton indef make , welding holder , current 600amp , esab make , welding copper lead 35 sqmm , cutting torch , welding safety hand gloves , welding white glass , welding black glass , safety goggles (transparent) , oxygen regulator , lpg regulator , gas cutting nozzle 1/8 inch , gas cutting nozzle 1/16 inch , gas cutting nozzle 1/32 inch , white lead , red lead , emerey paper rough , emerey paper fine , emerey tape fine , graphite powder , hand wire brush 6 inch size , grinding wheel 5 inch bosch make , grinding wheel 7 inch bosch make , cutting wheel 7 inch bosch make , m-seal compound , teflon tape , oxygen rubber hose pipe , red , lpg rubber hose pipe , blue , woolen felt size 1500x4000x16mm (namda) , painting brush 4inch , hose pilpe clamp 1.25inch , rubber star l-75 , lovejoy make , rubber star l-90 , lovejoy make , rubber star l-95 , lovejoy make , rubber star l-100 , lovejoy make , wire braided rubber hose pipe 1inch , pressure- 800psi , temp.-80 to 120 degree c heavy duty , flexible wire braided hose pipe 3/4 inch , (tansperant) pressure- 5kg per sqcm , heavy duty , ms bolt 12x45 mm , full thraed , nylock nut m-12 , split pin m-6x50 mm , split pin m-6x65 mm , metalon pad as per drawing or semple , ms bolt 20x120 mm , halfthraed , nylock nut m-20 , oil seal mykoda/skf no-20-30-10 , oil seal mykoda/skf no-24-42-8 , oil seal mykoda/skf no-30-47-7 , oil seal mykoda/skf no-45-70-8 , oil seal mykoda/skf no-50-70-10 , oil seal mykoda/skf no-50-80-8 , oil seal mykoda/skf no-55-80-8/10 , oil seal mykoda/skf no-60-85-10 , oil seal mykoda/skf no-68-100-10 , oil seal mykoda/skf no-78-100-10 , oil seal mykoda/skf no-65-90-10 , oil seal mykoda/skf no-70-90-10 , oil seal mykoda/skf no-80-100-10 , oil seal mykoda/skf no-75-95-10 , oil seal mykoda/skf no-100-120-13 , oil seal mykoda/skf no-85-100-10 , oil seal mykoda/skf no-85-110-12 , oil seal mykoda/skf no-20-30-10 , oil seal mykoda/skf no-95-120-13 , oil seal mykoda/skf no-100-120-10 , oil seal mykoda/skf no-110-130-13 , oil seal mykoda/skf no-130-160-12/15 , oil seal mykoda/skf no--300-330-15 , hydraulic rubber hose pipe both side flange type -en853/sae100/r1 at , size-3/4inch , length-3 mtr. , max. w.p.-105 bar , 1520 psi make mithra fluidtrans , hydraulic rubber hose pipe both side flange type-1 sn dn16 din 20022 , en853 , sae100 , r1 at , size-5/8inch , length-3 mtr. , max. w.p.-130 bar/1900 psi make polyhose , hydraulic rubber hose pipe both side flange type -sae100 r4-16 , i.d.-1inch , length-1.5 mtr. , max. w.p.-17.2 bar/250 psi make parker markwel , hydraulic rubber hose pipe both side flange type -sae100 r4-32 , i.d.-2inch , length-1.5 mtr. , max. w.p.-10 bar/145 psi make parker markwe , hydraulic rubber hose both side flange type -5 sae100 r4-20 , i.d.-1 1/4inch , length-2.6 mtr. , max. w.p.-13.8 bar/200 psi make parker markwel , hydraulic rubber hose both side flange type -6 sae100 r4-32 , i.d.-2inch , length-2.6 mtr. , max , w.p.-10 bar/145 psi make parker markwel , socket set 1/4 inch drive , 46 pcs set (taparia sa46) , plier 8inch (taparia 1621-8) , pipe wrinch 8inch , pipe wrinch 12inch , slide wrinch 6inch , slide wrinch 10inch , slide wrinch 12inch , ring spanner set mm (6 , 7 to 30 , 32) , d-spanner set mm (6 , 7 to 30 , 32) , wire stripper set , allen key set inch , allen key set mm , nose circlip piler inner , nose circlip piler outer , hexa fram with blade model-hfsa12 size 12inch , screw driver kit (model 802) , long handle screw driver size (300mmx8mm) , cable tie 4inch , cable

CTN :45527721

27 Jun, 2026 NA

Parganas - West Bengal

Tender For tender for supply of tools procurement for depot metro - spanner double end open 6x7mm , spanner double end open 8x9mm , spanner double end open 10x11mm , spanner double end open 12x13mm , spanner double end open 14x15mm , spanner double end open 16x17mm , spanner double end open 18x19mm , spanner double end open 20x22mm , spanner double end open 24x27mm , spanner double end open 30x32mm , spanner double end open 32x36mm , spanner double end open 36x41mm , spanner double end open 41x46mm , spanner double end open 46x50mm , slogging striking face ring spanner 36mm , slogging striking face ring spanner 38mm , slogging striking face ring spanner 41mm , slogging striking face ring spanner 46mm , slogging striking face ring spanner 55mm , slogging striking face ring spanner 60mm , slogging striking face ring spanner 70mm , single ended open jaw spanner 19mm , single ended open jaw spanner 24mm , single ended open jaw spanner 30mm , single ended open jaw spanner 32mm , single ended open jaw spanner 36mm , single ended open jaw spanner 41mm , single ended open jaw spanner 46mm , single ended open jaw spanner 55mm , single ended open jaw spanner 60mm , single ended open jaw spanner 70mm , single ended open jaw spanner 105mm , ring spanner de 8x9 mm , ring spanner de 10x11 mm , ring spanner de 12x13 mm , ring spanner de 14x15 mm , ring spanner de 16x17 mm , ring spanner de 18x19 mm , ring spanner de 20x22 mm , ring spanner de 21x23 mm , ring spanner de 24x27 mm , ring spanner de 30x32 mm , air impact wrench half sqdr 16 mm cap

Jaw Spanner Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government