Latest jcb machine scrap Tenders | Government jcb machine scrap Tenders

Central Government/Public Sector

CTN :40024715

07 May, 2025 NA

Delhi - Delhi

Tender For supplying, stacking and loading of 29,000 cum, 65 mm gauge stone ballast (machine crushed) into railway wagons at ballast sub depot no. 2 at tkd. (including all leads & lift, gst, taxes etc., so nothing will be paid extra whatsever the case may be)

Central Government/Public Sector

CTN :40024690

12 May, 2025 NA

Bangalore - Karnataka

Tender For den/south/sbc sec : manufacturing, supply and stacking of machine crushed track ballast at prnt (periya nagathunnai) depot including loading in connection with the work of sbc-sa sec : complete track renewal (p) of existing 52kg rails on 52kg psc of 1540 nos/km with 60kg/90 uts rails and 60kg wider base sleeper of 1660/km for a length of 20.2 km from km 45/000-54/000, 55/100-900 and 56/100-66/500 (sl) in aden/dpj section

State Government

CTN :40020933

28 Apr, 2025 4.53 Lacs

Birsinghpur - Madhya Pradesh

Tender For annual work contract for cleaning of accumulated fly ash dust around the silo of phi phii phiii silo area roadsopen space near silo by hiring the jcb machine with diesel and operator loading into the trucksdispose off into ash sump at 4x210mw silo

Central Government/Public Sector

CTN :40010421

09 May, 2025 NA

Jhansi - Uttar Pradesh

Tender For jhansi division -bsz-gtm- ctr (p) - 36.51 tkm & jhansi division -gtm-bzm ctr (p) - 32.23 tkm-ns item :- a) running track site:- replacement of old sleepers and rails (ctr) by dismantling existing track of all types of sleepers by making 13m loose rail panel (or any suitable length panel) with existing sleepers & sh rail (for removing existing track) with wider base sleepers/revised wider base sleepers at density of 1660 sleepers per km assembled with loose rail panel (or any suitable rail length panel of sh rail) in pqrs depot and placing over ballast properly during traffic block after removing panels of old sleeper and sh rail of 13 m loose rail panel (or any suitable length panel) wth the use of contractor's pqrs machine by providing auxilary track with gauge of 3400mm (either with the use of existing rail from existing track or with new rail unloaded by contractor from eur in block as instructed by sse/p-way, (if required) over metal/ wooden sleepers, to be provided by railway, 500 nos./rail km on both rails at the interval of 2m) and providing fish plates for joining loose sh rail over wider base sleeper for continuity of track and maintaining track parameters as per para 522 of irpwm 2020 to keep the track fit for 30kmph. sh rail over new wider base sleepers/revised wider base sleepers to be replaced with newlearlier existing rail on running track (with replacement of rutbber pad, liner & greased erc and greasing of liner contract area. grease to be used should be of 'o' graphite grease as per s code 408). as soon as loose rail length of track reaches 500m/750nm (as per decision of railway site engineer ie. sseje/ p-way), loading of track panel (sh rail over old normal sleeper and tied with erc) of approximately 13 m length over railway wagons and unloading of track panels of the length of 13 m (or any suitable length) and wider base sleepers/revised wider base sleepers will be done during traffic block. trr with the rail of the length of 250 m to 500m (preferably 20rail panel) will have to be done as soon as track of loose rail exceeds 500m length. further the contractor wil follow instructions of sse/p-way to relax speed of track upto maximum speed of section as per schedule laid down in irpwm 2020 para 708 for machine tamping with all machine packing related works such as recoupment of crib ballast, shoulder ballast, boxing and dressing. the whole process wil continue ill completion of work. auxilary track (at) will have to be removed with advancement of ctr work as per direction of railway (sse/jeip-way). b) pqrs depot: track panel with sh rail of 13 m or any suitable length over wider base sleepers/revised wider base sleepers/revised wider base sleepers will be made with necessary fittings in pqrs depot. loading of these panels over railway wagons and unloading of released track panels (released from running track) consisting of all types of rails & sleepers from railway wagon at pqrs depot using contractor's own portal crane including dismantling and stacking each component of track properly at designated locations. (note: this item of complete track renewal with wider base sleeper is a composite item and all activities as required will have to be done by the contractor with his/her own pqrs machine & other machines, tools and plants including all other resources as per requirement of the work (in pqrs depot and during traffic block in running tack). ralway will provide wagons and locomotives free of cost for loading/unloading and transportation tofrom pors depot/work site (running track) for loose rail panels with normal old sleepers and with wider base sleepers/revised wider base sleepers. nothing extra will be paid except the rates as mentioned against the item. raiway will also provide metal/wooden sleepers required for at, free of cost. various activities which are involved in ctr work are elaborated in "sequence of activities provided with tender schedule." (unit- per track km.).

State Government

CTN :39928703

21 Apr, 2025 NA

Parganas - West Bengal

Tender For supply of ex-210 big poclain machine on hire basis (with petroleum, oil, lubricants, driver, helper, loading and unloading charges also included).

CTN :39993528

02 May, 2025 NA

Jodhpur - Rajasthan

Tender For custom bid for services - job work for preparation of functional filler materials, surface modification and paint formulation , custom bid for services - job work for study, design evaluation and certification requirements of special coatings to be applied on skin of airborne platform-1. preparation of microwave absorbing metal flakes powder , weighing and loading of raw metal powder in attritor mill along with steel balls and its operation , high energy milling of powder along with process control agent and regular monitoring during operation , i. , ii. , iii. , iv. , v. , weighing and packaging of powder in air tight container , vi. , vii. , un loading of powder from attritor mill on to trays and drying in room temperature , separation of powder from steel balls through sieving , regular cleaning of the machine and equipments related to above job works preparation of 5 kg of metal flakes per month , 2. surface modification of metal flakes powder , i. reaction for coating of oxide material on iron metal flakes , ii. , iii. , filtration and washing of powder , drying and packing of powder , 3. formulation of radar absorbing paint , i. , ii. , iii. , iv. , cleaning of bead mill by using solvent , modification of resin system by blending of different resins , formulation of paint by using filler material as per requirement , testing of drying time, flexibility, degree of fineness for quality check , 4. preparation of test specimen , i. cleaning of test panels (aluminium, mild steel and composites) , ii. , iii. , iv. , v. , primer application, followed by surface preparation through emery paper and solvent , application of radar absorbing paint to achieve desired thickness , prepare test panels of different sizes (100 mm x 100 mm) as per requirement application of polyurethane top coat , 5. other terms and conditions: , i. , ii. , iii. , iv. , v. , payment will be made on monthly basis after completion of job based on user job completion certificate , duration of job work: two years , the service provider should have prior experience of executing technical job work contracts in any of government department of r & d in government of india. copy of relevant supply order to be enclosed with the bid. , irrelevant supply orders pertaining to civil works, construction, security, maintenance and arboriculture will not be considered. , the contract may be extended further based on satisfactory services of service provider on same terms and conditions, if required by buyer. , this job work will be carried out at defence laboratory, jodhpur. , many shay , , scope of work , job work to study, design evaluation and certification requirements of special coatings to be applied on skin of airborne platform , (1) following scope of job work will be carried out under the supervision of rcma nashik , on monthly basis at rcma nashik. , i. , ii. , literature survey about latest and advance materials and technologies in the field of radar signature suppression of airborne targets , evolving the approach and strategies for airworthiness certification of special coating. iii. scrutiny of the airworthiness certification plan (acp), system requirements, , integration, technical specification etc. , iv. verification of the characterisation mythologies of special materials. , v. , verification and validation of process control documents and various design documents. vi. verification and validation of cfd analysis of aircraft with different flight regions. , vii. verification and validation of erosion, wear and tear analysis of coated airborne target. viii. scrutiny of documentation requirements for system level coating application and , subsequently flight evaluation. , ix. , study of rcs reduction after application of coatings by using simulation and modelling through matlab software. , (2) other terms and conditions: , i. , ii. , iii. , iv. , v. , payment will be made on monthly basis after completion of job based on user job completion certificate ,

CTN :39973655

21 Apr, 2025 5.87 Lacs

Multi City - Karnataka

Tender For supply of matrials to constraction of samashan at konkonakoppa - a 12 x 12 gauge g.i. wire 100 mtr at ts. 8.00/ per m (konkonakoppa samashan), tractor - 40 hp (konkonakoppa samashan), laboratory asst. (sslc passed)/mate/supervisor (konkonakoppa samashan), moulding charges for casting gaurd stones (konkonakoppa samashan), transportation loading and unloading at1% on material (konkonakoppa samashan), tools and plants at 2% on material (konkonakoppa samashan), hom of cutting and grinding machine - 1 (konkonakoppa samashan), mechanic class ii/mechanic hmp grade i/eme grade (konkonakoppa samashan), anticorrosive bituminous paint (black) (konkonakoppa samashan), ball bearing hinges heavy duty (konkonakoppa samashan), cast iron spike (konkonakoppa samashan), a 40 x 6 mm ms plates (konkonakoppa samashan), a 36 mm x 6mm ms plates (konkonakoppa samashan), a 16 x 16 mm ms square rod (konkonakoppa samashan), a 50 mm dia ms hollow pipe b class 14 gauge (konkonakoppa samashan), welding charges at 10% on material (konkonakoppa samashan), fitter class i (konkonakoppa samashan), aluminium paint (konkonakoppa samashan), wire mesh 50mm x 50mm (konkonakoppa samashan), add brush, putty, sand paper at 2% on cost of paint (konkonakoppa samashan), water proofing cement paint (konkonakoppa samashan), mason class i (with tools) (konkonakoppa samashan), unit cost as per the specification (konkonakoppa samashan), tools and plants and electrical charges at 2% (konkonakoppa samashan), add brush at 1% on cost of paint (konkonakoppa samashan), enamel metal paint (konkonakoppa samashan), add handling , loading and unloading at 2% on material (konkonakoppa samashan), add providing and removing scaffolding at 3% on labour (konkonakoppa samashan), painter class i (konkonakoppa samashan), add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint (konkonakoppa samashan), ready mix primer paint (ready mix red lead paint) (konkonakoppa samashan), hom of cutting and grinding machine (konkonakoppa samashan), add (konkonakoppa samashan), hom of welding and grinding machine (konkonakoppa samashan), welder grade i (konkonakoppa samashan), corbon electrodes (konkonakoppa samashan), anchor bolts 750mm (konkonakoppa samashan), base plate / base plate (konkonakoppa samashan), gusset plates 6 mm thick (konkonakoppa samashan), ms angle iron 40mm x 40mm x 6mm, 23 metre in length at 3.5 kg per metre (konkonakoppa samashan), ms angle iron 50mm x 50mm x 6mm, 33.8 metre in length at 4.5 kg per metre (konkonakoppa samashan), binding wire (konkonakoppa samashan), tmt bars fe 500 (konkonakoppa samashan), add sundries charges at 2 % on material (konkonakoppa samashan), add handling , loading and unloading at 1% on material (konkonakoppa samashan), casurina poles 100 - 150 mm (konkonakoppa samashan), burnt bricks class 35 (non modular) (konkonakoppa samashan), mixer (concrete small used in culvert) (konkonakoppa samashan), bond stone 20 x 20 x 45 cm (konkonakoppa samashan), size stone 20 x 20 x 25 cms (konkonakoppa samashan), boulders (konkonakoppa samashan), hom of vibrator 0.71 days (konkonakoppa samashan), plasticizer / super plasticizer (konkonakoppa samashan), add sundries charges at 1 % on material (konkonakoppa samashan), add watering charges at 1 % on material (konkonakoppa samashan), mixer (concrete) - 1 cum capacity (konkonakoppa samashan), portland cement (konkonakoppa samashan), broken stone aggregate 12 mm to 10 mm size (konkonakoppa samashan), broken stone aggregate 20 mm size (konkonakoppa samashan), transportation/loading and unloading of material/lifting of material /wastage/unforeseen charges/miscellaneous which are necessary during execution. (konkonakoppa samashan), add watering charges at 1 % on labour (konkonakoppa samashan), add sundries charges at 1 % on labour (konkonakoppa samashan), coarse sand (zone iii) (konkonakoppa samashan)

Central Government/Public Sector

CTN :39974772

02 May, 2025 NA

Nagpur - Maharashtra

Tender For proposed supplying and stacking of machine crushed ballast from outside quarry as per revised ballast specification of feb. 2023 and loading the same into the ballast hoppers by mechanical means at hinganghat depot under aden warora sub division (qty.50000.00 m3).

Central Government/Public Sector

CTN :39945673

02 May, 2025 NA

Delhi - Delhi

Tender For corrigendum : supplying of machine crushed hard stone track ballast confirming to rdso's specification is/rdso-ge/0001-2023 of february'2023 (as amended vide upto date correction slips) including leading to loading point and loading the same into bobyn type wagons from nijampur railway station ( in nwr region). the rate is inclusive of all cost, labour, materials, tools, plants, equipment, machinery, all lead/lift, handling/ re-handling, loading/ unloading, transportation, crossing of railways tracks/nalah/river/stream as required, safety precautions in vicinity of railway track, inclusive of all royalties, taxes (including gst) levied by central/state govt. & local bodies and all other incidental charges etc. complete in all respect.

Central Government/Public Sector

CTN :39922500

21 Apr, 2025 74.72 Lacs

Delhi - Delhi

Tender For providing professional services for operation and maintenance of 2 nos portable pneumatic machine for loading of wheat grain into container stuffing machines with supply an installation of flexi and liner at rdtkota tather baran dahara bundi bhamasha mandi kota

Jcb Machine Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors