Latest jet oil Tenders | Government jet oil Tenders

Central Government / Public Sector

CTN :45704220

03 Jul, 2026 NA

Guwahati - Assam

Tender For providing of customized amc/cmc for pre-owned products - expert services for overhauling, repair and reconditioning of greaves cotton make diesel engines at iocl guwahati refinery 9010c26a74; rfq item no 00010 sub line item no 00010 cylinder head complete repai..,customized amc/cmc for pre-owned products - expert services for overhauling, repair and reconditioning of greaves cotton make diesel engines at iocl guwahati refinery 9010c26a74; rfq item no 00010 sub line item no 00020 injector nozzle calibration; ..,customized amc/cmc for pre-owned products - expert services for overhauling, repair and reconditioning of greaves cotton make diesel engines at iocl guwahati refinery 9010c26a74; rfq item no 00010 sub line item no 00030 engine major over-hauling; co..,customized amc/cmc for pre-owned products - expert services for overhauling, repair and reconditioning of greaves cotton make diesel engines at iocl guwahati refinery 9010c26a74; rfq item no 00010 sub line item no 00040 fuel pump & cylinder complete..,customized a

Central Government/Public Sector

CTN :45702701

01 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For auction sale of rolling stock - condemned and unserviceable bg demu coach no. special repair dpc 008073 with available items [refer enclosure for the material composition]. location: coach care centre tpj/diesel loco shed goc. custodian: sse/demu/diesel shed/goc. re-claimable items - [1] wheel sets with bull gear-04 sets [2] 8v 450ah lead acid battery-03 nos [3] 6v batteries-18 nos [4] truck assembly-02 sets [5] axle box with bearings-08 nos [6] buffer complete-02 nos [7] schaku coupler assembly[draw bar with hook, draft gear assembly]-01 set [8] brake cylinders-04 nos [9] wear pieces(brass)-04 nos [10] dpc main doors-02 nos. advice note no.073817-25-08698, dt: 11.12.25. note-[1] delivery to be made on as is where is and lot basis.[2]the location indicated is only tentative. railway reserves the right to change the location of sold coach, based on the availability of track, cutting and loading space and other administrative reason, as deemed fit by the auction conducting officer.[3]gas/chisel cutting is permitted only to sizes that are loadable with a crane, only after ensuring sufficient safety measures against fire hazards etc. to avoid any mishap to any person, railway material etc. and the same should be ensured by the witnessing officials.[4]in case purchasers require usage of any railway assets/materials such as electricity/forklift truck etc. during the process of delivery, they are required to pay the prescribed amount to railways, as directed by the respective custodian of the lot. special condition- [1] reclaimable item as said above in description of the lot, should be returned to the custodian before commencing delivery. [2] in order to make the assessment, the purchaser may visit the coach offered for condemnation and the site conditions before quoting the offer.[3] the purchaser has to make his own arrangements such as tools, lifting tackles, lifting equipment, gas cutting equipment. [4] the weight and quantities were taken into consideration as advised by the custodian [5] the purchaser may note that reclaimable items of coach are to be stripped instead of gas cutting to avoid damage to rc items and the purchaser should make such arrangements, especially traction motors should be removed by using proper tools and equipments without causing damage to truck assembly [6] the purchaser is strictly instructed to transport/stack all the reclaimable items at one location well away from the cut off parts of the coach as directed by the custodian. [7] the purchaser will be held responsible for any damage/fire accident caused to the railway property. [8] railway is not responsible for any shortage.[9] after completion of delivery, purchaser has to keep the cutting and loading spot neat and clean, free of any left over coach scrap. [10] railways does not guarantee for quality, quantity description etc.[11] delivery should commence immediately after cutting without any delay. [12] the courts in chennai alone shall have exclusive jurisdiction in the matters/disputes arising out of the contract/arbitration/conciliation proceedings and the place of arbitration/conciliation, if any, shall be in chennai only. [13] bsv partly paid along with emd will be forfeited, if full payment is not received in stipulated time, with interest if any applicable. [14] part delivery is not permitted against part payment. [15] if any hsd oil/lube oil available in fuel tank/oil sump of the said coach, the same may be returned to the custodian.(location: coach care centre tpj / diesel loco shed goc)

CTN :45693799

03 Jul, 2026 19.53 Lacs

Yamunanagar - Haryana

Tender For principal approval for estimate for quick reaction team in emergency situation during rainy season (zone-1) ward no. 01 to 07 in municipal corporation yamunanagar-jagadhri. - ns item -tractor mounted pump for dewatering (during desilting of nallah) with discharge 5000 ltr per hours with driver and 1 helper with fuel and all requirement complete in all respect. with geo tag 3 nos. per day for 2 month i.e 60 days 3 x 60 = 180 (with fuel), ns item -suction tanker with capacity 4000 ltr. with driver, 1 helper, with manpower, diesel and maintenance suction tanker for 2 months i.e 45day, ns item -analysis for sewerman / beldar / helpers / pump operator / electrician / plumber as per hkrnl portal rate of manpower (as per hkrn rate 2025) 5 helpers / 1 electrician / 1 plumber i.e 7 manpower for 3 month i.e 60day 7x60 i.e 420 days, ns item -retro reflective tape, caution tape white, kassi, geti, tasla, hand gloves, torch, rain coat, safety jacket, helmet, mask etc. (rates including all taxes) 5 helpers / 1 electrician / 1 plumber i.e 7 manpower

CTN :45696021

03 Jul, 2026 NA

Yamunanagar - Haryana

Tender For principal approval for estimate for quick reaction team in emergency situation during rainy season (zone-2) ward no. 08 to 15 in municipal corporation yamunanagar-jagadhri - ns item -tractor mounted pump for dewatering (during desilting of nallah) with discharge 5000 ltr per hours with driver and 1 helper with fuel and all requirement complete in all respect. with geo tag 3 nos. per day for 2 month i.e 60 days 3 x 60 = 180 (with fuel), ns item -suction tanker with capacity 4000 ltr. with driver, 1 helper, with manpower, diesel and maintenance suction tanker for 2 months i.e 45day, ns item -analysis for sewerman / beldar / helpers / pump operator / electrician / plumber as per hkrnl portal rate of manpower (as per hkrn rate 2025) 5 helpers / 1 electrician / 1 plumber i.e 7 manpower for 3 month i.e 60day 7x60 i.e 420 days, ns item -retro reflective tape, caution tape white, kassi, geti, tasla, hand gloves, torch, rain coat, safety jacket, helmet, mask etc. (rates including all taxes) 5 helpers / 1 electrician / 1 plumber i.e 7 manpower

CTN :45688835

16 Jul, 2026 NA

Delhi - Delhi

Tender For mobil jet oil ii

CTN :45698399

08 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of fuel gauge asm (this is a safety item) as per drg.no. 8383728 alt ea as per specn. specification for cleaning,marking and packing , misc-437 [ warranty period: 30 months after the date of delivery ]]

State Government

CTN :45696572

01 Jul, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

Central Government/Public Sector

CTN :45673499

04 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of fuel gas flow orifice assembly as per boq line item 1 , mandatory spares for item 1 as per boq line item 2 , feed water flow orifice assembly as per boq line item 3 , spray water flow orifice assembly as per boq line item 4 , soot blower steam flow orifice assembly as per boq line item 5 , mandatory spares for item 3 , 4 , 5 as per boq line item 6

Central Government/Public Sector

CTN :45681826

02 Jul, 2026 NA

Bhavnagar - Gujarat

Tender For supply of b check kit for cummins make model no qsm 15g 1 cpcb iv each one set consisting with following eight (08) items (1.) valvoline premium blue 8600 1/10 item name 508305 - 06 nos. (2.) packing and forwarding charges 18 item name sg- c00008 -01 no. (3) inhibitor corrosion 10 liters item name. 4926654 - 01 no (4) filter, diesel exhaust fluid item name a059z389 - 01 no (5) cartridge fuel filter item name 5627726 - 01 no (6) filter fuel item name ax101755 - 01 no (7) lub oil filter 1/10 item name ax1017056 - 01 nos (8) lid, housing liquid item name- a066s086 -01 no. [ warranty period: 6 months after the date of delivery ] ]

State Government

CTN :45661343

03 Jul, 2026 75.37 Lacs

Ambala - Haryana

Tender For providing and fixing of pool equipment accessories in swimming pool at sport complex sector-10, ambala city. “providing and fixing of pool racing lane and pool standard podium and other equipment accessories etc. complete in all respect and all other works contingent thereto.” (including three-year defect liability /mtc. free of cost. ) - [1.pm057] pm057. hire charges for jcb with bucket capacity more than 0.75 cum with fuel and driver [rate], [10.2]supplying and filling in plinth with sand (conforming to zone-iv, is 1542) under floors, including watering, ramming, consolidating and dressing complete. [through rate], [10.50.1]providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the engineer-in-charge. 1. polished granite stone slab jet black, cherry red, elite brown, cat eye or equivalent. [through rate], [11.13.2]cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 2. 20 mm cement plaster [through rate], [11.52]cement rendering on plaster 1 mm thick [through rate], [12.134.4]providing and fixing factory made upvc white colour sliding glazed window up to 1.50 m in height dimension comprising of upvc multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape and size according to upvc profile), appropriate dimension of upvc extruded glazing beads and upvc extruded interlocks, epdm gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), g.i fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame and sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware`s and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing and direction of engineer-in-charge. (single / double glass panes, wire mesh and silicon sealant shall be paid separately). variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 4. three track three panels sliding window with fly proof s.s wire mesh (two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (area of window above 1.75 sqm). [through rate], [12.171]providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top and bottom pivot and double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of engineer-in-charge (door handle, lock and stopper etc.to be paid separately). [through rate], [12.177.1]providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): 1. with toughened glass panes of 6 mm thickness (weight not less than 15 kg/sqm) [through rate], [13.41]providing and fixing stainl

Jet Oil Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government