Latest jockey pump repair Tenders | Government jockey pump repair Tenders

corporations/Associations/Others

CTN :45696580

08 Jul, 2026 NA

Kolkata - West Bengal

Tender For supply, delivery, installation of one number dismantling joint along with replacement of worn out spare parts, testing and commissioning of 750 mm dia. pdv and other allied works of pump unit no. 5 at cwps-ii, grww. - supply, delivery, installation, testing andcommissioning of 700 mm dia ms dismantling joints., dismantling counter weight, lever, arm, hydraulic unit etc. and all other components of the hydraulic system one by one of 750 mm dia. pump discharge valve parts by parts sequentially and cautiously as per direction of the engineer-in-charge (eic) at grww., dismantling the 750 mm dia. pdv from the existing pipe-bay, installatio/fitting-fixing of barrel-piece/flange and lifting & keeping the same on the working platform sequentially and cautiously as per diretion of the eic at grww., to and fro transportation charges of 750 mm dia. pdv from grww to workshop including loading and unloading.., dismantling all the components of 750 mm dia. pdv parts by parts sequentially and cautiously as per direction of the eic at grww/workshop., supply, delivery and fitting-fixing of drive shaft of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of valve seal of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of seat ring (ss 410) of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of seat ring (epdm rubber) of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of stub bearing bush of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of drive bearing bush of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of clamping ring of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of end cover of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of o ring of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of shaft pin of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of allen screw of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply,delivery and fitting-fixing of gland plate of 750 mm dia. pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of shaft key of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., repairing the damaged portion of the hole for holding the bearing of 750 mm dia. pdv by deposting metal, boring, machining, grinding etc., all complete, as per original shape and size and direction of eic at grww.., re-aasembling all the components of 750 mm dia. pdv parts by parts sequentially and cautiously as per direction of eic at grww., performing of necessary hydro-testing of the disc and body of 750 mm dia. pdv as per direction of eic at grww., lowering from the working-bay, installation, fitting-fixing of 750 mm dia. pdv in the existing pipe-bay removing the existing barrel-piece/flanges as per direction of the eic at grww., re-assembling and re-fitting all the components of the hydraulic system like counter weight, lever, arm, hydraulic unit etc. with the existing 750 mm dia. pdv installed in the pipe-bay parts by parts sequentially and cautiously as per direction of the eic at grww., test run, operation and commissioning of the entire system of 750 mm dia. pdv as per direction of the eic at grww.

CTN :45498444

29 Jun, 2026 NA

Baramulla - Jammu And Kashmir

Tender For bid to ras supply of transparent celestial sphere , barn door tracker , jantar mantar model , sundial set model , telescope , refractor telescope (76 mm) , reflector telescope (50 mm) , dobsonian telescope (150 mm) , computerized telescopem , solar filter , rocket launcher , ring the planet setup , air pump with nozzle , latitude finder , lens kit , gnomon base & rod , solar view goggles , planisphere , green laser , astronomy binocular , spectroscope , diy solar system kit , moon phase puzzle , discovering skies puzzle , shadow show game , solar system cards , zodiac wheel , sundial template , diy curiosity rover , building megastructure kit , diy space satellite , eclipse model , hydraulic robotic arm kit , day & night board game model , pop rocket , moon poster , ar/vr headset with software , moon crater base moon model , hydro rocket launcher , launcher stand , portable air compressor , globe , light up alien kit , diy moon buggy , food-o-naut kit , bluetooth speaker (v3) , sky map poster , constellation puzzle set , torch light & shadow kit , colour tube , light & shadow game pieces , light & shadow game sheet , white screen , dress up astronaut kit , white torch , experiment boards , animals in space cards , constellation guide book , lunar cycle demonstrator , iss model , planet weight machine , meteorite demonstration kit , gslv/pslv model (5 ft) , alt- az star tracker , motorised solar system , scientist photo frame , surya yantra , interior design & furniture , lms platform (2 years) , training (central+ on-site) , logistics (transport, installation, handling) * /bid number : gem/2026/b/7619550 + /dated: 10-06-2026 ' ' / bid document 1 / 39

CTN :45675373

09 Jul, 2026 NA

Multi City - Jharkhand

Tender For auction sale of others - 1 cam shaft bush bearing 1nos 2 injector pad 4nos 3 gasket intake mf 3nos 4 lever make injector 12nos 5 fuel filter 11nos 6 hose pt no 115 3nos 7 hose clip 2¿¿ for 160 kw 4nos 8 push rod for 160 kw 2nos 9 bushing for kcl 6nos 10 hose for 250kva 8nos 11 repair kit w.p 2nos 12 cyl liner [ruston] 6nos 13 super by pass filter part no -387948800k 3 nos 14 gasket for fuel filter 40nos 15 element lo 4nos 16 valve 16nos 17 starter [self] pt no -0503299 1nos 18 cylinder head 3nos 19 gasket ¿o¿ ring for air filter 90nos 20 hose turbo air connection 19nos 21 cylinder head gasket 4nos 22 hose clamp 1.5 ¿¿ 17nos 23 hose clamp 24nos 24 gasket unit 3nos 25 insert valve seat 24nos 26 oil seal [big] 2nos 27 corrosion ring plate 15nos 28 seal au drive [small] 2nos 29 tube rocker arn-lob 1nos 30 hose pt no hs 0806500ms 1nos 31 spider pt no ¿ 109859 2nos 32 piston ring 1nos 33 high pressure fuel pipe 160kw 8nos 34 fuel pump gear yd ¿ 20212 1nos 35 valve guide 10kw 4nos 36 mobil filter 160kw 4nos 37 nozzle 10kw 2nos 38 valve 10kw 4nos 39 c.r. bearing 10kw 4nos 40 main bearing 34001120 8nos 41 valve guide 25kw engine 17nos 42 gear 133.829 8nos 43 self-starter 24volt 1nos 44 transformer temperature indicator 1nos 45 cylinder head part no 1-232-180-001-7 1nos 46 self-starter 24volt 1nos 47 hydro meter 2nos 48 element lab oil turbo filter 10nos 49 element air cleaner (inner) 2nos 50 fitch fuel catalyst f-500 1nos 51 fuel filter p no- 4084133 2nos 52 self-starter ,cap -24volt suitable 1nos 53 fuel filter primary 9nos 54 fuel filter secondary 10 nos 55 set of scaling 13nos 56 tappet cover gas kit 150 nos 57 magnetic pick up 1nos 58 oil pressure switch 1nos 59 diode set 2nos 60 relay 24 volt dc 10nos 61 head gasket 9nos 62 liner o ring 2nos 63 solenoid assembly 1nos 64 c.r. bearing top+bottom 8nos 65 piston ring set 8nos 66 avr 1nos 67 avr for 5 kva d.g set 2nos 68 avr for 125 kva d.g set 2nos

Central Government/Public Sector

CTN :45329483

29 Jun, 2026 12.61 Lacs

Nagrota - Himachal Pradesh

Tender For corrigendum : provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate nu

CTN :45649811

27 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of boat electrical material 10 core shielded cable 0.50 , square mm for data signal , transmission and automatic , sensor application , 12/24 volt converter (part no. 45969-1000) , 12v dc to 230 v ac , converter , ampere meter , anchor light (all round clear) , astern light (half round clear) , auto fan , base (part no. 60027-1000) , battery cable , battery cable black 25 sq. mm , battery cable black 35 sq. mm , battery cable lugs 3 no. , battery cable lugs 4 no. , battery cable lugs 5 no. , battery charger , battery crocodile clips , battery cut off big switch , battery gravity hydro gauge , battery lugs , battery lugs for battery cable , battery selector switch , battery selector switch , battery terminal negative , battery terminal positive , bell push button , led flood light , led navigation red/green led roof light 24 v , loud hailer 30w12v , lower housing (part no. 60024-1000) , mast light (half round clear) , mcb switch 10a , mcb switch 16a , mcb switch 20a , mcb switch 25a , mcb switch 32a , mcb switch 6a. , mcb triple switch , motor horizontal (lower) (part no. 18753-0350) , motor vertical (upper) (part no. 18753-0350) , multi meter , navigation light (half round clear) (red) , navigation light (half round clear)stbd (green) , navigation light bulb , navigational light green , navigational light red , navigational light white , navigational light white 360 , nuc light red (all round clear) , on/off fuse switch (part no. 18753-0180) , pa horn , rectifier terminal no. 5 , remote control search light (part no. 60020-0000) , search light 24 v , search light bulb , search light led, cabin control , soldering iron , spot light selector switch (part no. 64073-0020) , starter button , starter fitting patty , starter foundation patty , swivel eye , toggle switch , upper housing (part no. 60023-1000) , warnish , water gauge , , water tank level sensor , winch breaker/isolator , winch motor , winch up and down control switch , wiper arm , wiper blade , wiper motor , wiper motor 24v , wiper motor 12v , wiper wash pump , , wire marine grade copper , , wire marine grade copper , , wire marine grade 2.5 mm , wire marine grade 4.00 mm

CTN :45415159

25 Jun, 2026 4.58 Lacs

Chandigarh - Chandigarh

Tender For corrigendum : repair and maintenance of tube wells and boosters including repair of water level gauge, ms panel, sluice valves and allied items of civil / electrical at various buildings i.e. punjab raj bhawan, haryana raj bhawan & residence sector-7, under maintennace booth, sector-7, chandigarh. (ch to: 2216 (np) mtc. and repair ) - repair of ci sluice valve up to 150 mm dia including dismantling, repair / replacement of spindle, nut , rubber packing, nuts and bolts complete., up to 100 mm dia, lifting and lowering of submersible pump set including dismantling of flenged joints, taking out column pipes, re-jointing etc including replacement of defective packing, nuts and bolts etc complete, tube well, booster, supplying and fixing of single phase preventor make minilec or equivalent model of approved make to the satisfaction of eic , supplying and fixing of current transformer ( ct ) for ampere meter of suitable rating complete., supplying and fixing of overload relay of following capacities, 14 to 23 amp, 30 to 42 amp, 45 to 75 amp, providing and fixing of star delta starter timer of make l&t or equivalent model of approved make to the satisfaction of eic, providing and fixing of kit kat 500 amp complete in all respect, supplying and fixing of capacitor of 20 to 50 mfd make l&t, siemens or equivalent model of approved make to the satisfaction of eic , supplying and fixing of analog meter of make l&t ( rishabh ) or equivalent model of approved make to the satisfaction of eic , volt meter, ampere meter, supplying and fixing of 3 pole mccb of following capacity of make l&t, bch, havells or equivalent model of approved make to the satisfaction of eic , 100 amp, supplying & fixing of contactors block of make l&t, bch or equivalent model of approved make to the satisfaction of eic , mnx - 25, mnx - 32, mnx - 50, mnx - 70, supplying and lowering of submersible cable 16mm2 of make havells, finolex, l&t or equivalent model of approved make to the satisfaction of eic , supplying and lowering of submersible cable 25mm2 of make havells, finolex, l&t or equivalent model of approved make to the satisfaction of eic , providing and fixing hydro pneumatic pump of size 0.5 hp of approved make with 24 ltr capacity tank, pressure switch, pressure gauge, nrv accessories and making connections complete of make crompton or equivalent model of approved make to the satisfaction of eic, repair and rewinding of submersible pump set including carriage from installation to workshop and back. the rate include replacement of all defective parts of pump and motor rewinding., 5 hp, 7.5 to 10 hp, 35 hp to 55 hp, repair and rewinding of monoblock submersible pumping set including repacement of defective parts as required and carriage from installation to workshop and back., 0.5 h.p, 1 h.p, 2 h.p, manufacturing, supplying and fixing of ms control panel 16 gauge of size 600x700mm with door including wiring of inside panel, complete in all respect, providing and fixing of self pumping monoblock single phase pump for boosting of make crompton or equivalent model of approved make to the satisfaction of eic, 0.5 h.p, 1 h.p, 2 h.p, providing and fixing of pressure gauge make h-guru or equivalent model of approved make to the satisfaction of eic, providing and fixing of elcb 63 amp make l&t/havells or equivalent model of approved make to the satisfaction of eic, repair of internal control wiring 1.5mm wire with thimbles, nut bolt etc. complete

corporations/Associations/Others

CTN :45617697

04 Jul, 2026 NA

Sant Kabirnagar - Uttar Pradesh

Tender For supply of high torque hydro motor sai make , three phase ac fan hydraulic pump shikha engineering , hydraulic cylinder seal kit shikha engineering , grab hydraulic cylinder shikha engineering , hydraulic hose assembly 1 inch 1060 mm 350 bar , hydraulic hose assembly 3 by 4 inch 540 mm 350 bar , control unit 3 point 2 danfoss , suction strainer sc 3 040 shikha engineering , hydraulic pump suction filter 600 to 850 lpm , hydraulic pump return filter parker 9261169 , solenoid valve 110 volt ac vickers , bonded seal kit set shikha engineering danfoss , hydraulic pump critical pressure kit , pvg valve electric coil danfoss

CTN :45496120

29 Jun, 2026 22.28 Lacs

Kota - Rajasthan

Tender For corrigendum : tn11194supply of spares of ash slurry pump model d-135 and clinker grinder of ash handling plant pump house stage-i at kstps kota under proprietary category - u seal 916-321(for ash slury pump) pt. no. 916-321, suction sleeve 916-012, shaft 916-305, stuffing box 916-016, shaft sleeve 916-022, impeller part no. 916-029, bell suction side part no.916-010, bell liner suction side 916-011, bell engine side part no. 916-014, liner engine side 916-016, discharge adopter, reducer 12 x 10", bearing retainer ring 916-314, oil level indicator, "compression spring 916-320(1 set of 8 nos.)", oil gauge, 40 nb bsp p. no. 1 1/2" ispt, adopter sleeve 916-312, flinger p. no. 916-026, thrust coller, gland half, spares for clinker grinder assembly for ahp stage-i, "8""x8"" tangential inlet hydro ejector assembly part no. a-218-r/l"

CTN :45474143

29 Jun, 2026 22.28 Lacs

Kota - Rajasthan

Tender For corrigendum : supply of spares of ash slurry pump model d-135 and clinker grinder of ash handling plant pump house stage-i at kstps kota under proprietary category- u seal 916-321(for ash slury pump) pt. no. 916-321 , suction sleeve 916-012 , shaft 916-305 , stuffing box 916-016 , shaft sleeve 916-022 , impeller part no. 916-029 , bell suction side part no.916-010 , bell liner suction side 916-011 , bell engine side part no. 916-014 , liner engine side 916-016 , discharge adopter , reducer 12 x 10" , bearing retainer ring 916-314 , oil level indicator , compression spring , oil gauge, 40 nb bsp p. no. 1 1/2" ispt , adopter sleeve 916-312 , flinger p. no. 916-026 , thrust coller , gland half , spares for clinker grinder assembly for ahp stage-l , 8"x8" tangential inlet , hydro ejector , assembly

CTN :45572199

22 Jun, 2026 NA

Damanjodi - Odisha

Tender For procurement of consumable items for works contract in connection with mechanical piping painting and insulation works for 5th stream alumina plant at nalco damanjodi odisha - grinding wheel. 7", cutting wheel 7", cutting wheel 5", gas cutting torch, oxygen regulater, lpg regulater, alu.. cable lugs 95 sq mm, argon regulator, d/a regulator, copper cable 50 sq mm, pvc coated copper power cable 2.5 sq mm 2 core., pvc coated copper power cable 4 sq mm 4 core., cutting nozzle 3/64, mother oven coil, gasket sheet 3 mm thickness, gasket sheet 3 mm thickness (graphite), switch board, pvc coated life line rope 12 mm (10 mm +2 mm), grinding machine ag 5, grinding machine ag 7, pvc socket 32 amps, pvc tape, welding holder, argon torch 200, ball avlve 1/2", wire rope clamp 12 mm, pvc pipe 2" dia, hose pipe 8 mm (oxygen & lpg), welding helmet, hydro testing hand pump, basic price (ex-works) excluding gst., packing & forwarding charges without gst (pl. specify the amount), freight/transportation charges without gst (pl. specify the amount), transit ins damanjodi charges without gst (pl. specify the amount), total price (i+ii+iii+iv) excluding gst, gst on (v) extra as applicable (in % age), igst:, cgst:, sgst:, total price including gst, total cif price for damanjodi site office, koraput district, odisha.

Jockey Pump Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others