Web Analytics Made Easy - StatCounter

Joinery Service Tenders

Get complete information related to latest Joinery Service Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Joinery Service Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Joinery Service Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

State Government

CTN :41301179 Due date: 11 Aug, 202511 Aug, 2025 6.81 Lacs
Tender For repair of parapet wall rcc post end beam of tanasi bridge at ch.10.90 km and installation of traffic restriction bar near bailey bridge at ch.5.05 km of jhalda gola road under purulia sub division of purulia division pwd during the year 2025-26

State Government

CTN :41287654 Due date: 08 Aug, 202508 Aug, 2025 36.64 Lacs
Tender For eor to central jail no. 6, tihar, new delhi. (sh- repair of rcc structures (roof, beam and column) showing distress in all wards of cj-6).

Corporations And Associations And Others

CTN :41218928 Due date: 04 Aug, 202504 Aug, 2025 NA
Tender For fabrication and erection - boiler house, dismantling, fabrication & erection of aph outlet cane to match the size of cane with esp nozzle inlet size, dis, fab & ere of air heater expansion bellow, dis, fabrication and erection of id fan upper & lower casing, dismantling, fabrication & erection of drum type rotary bagasse feeder (with shalf), dismantling, fabrication & erection of screw feeder, dismantling, fabrication & erection of screw feeder casing., fabrication & erection of man hole, fabrication & erection of pneumatic spreader assembly from 8mm thk. s.s. plate with fabrication & erection of deflector plate from 20mm thk. s.s. plate with top & bottom flange , dismantling of old pneumatic spreader assembly & internal deflector plate, 1.5 kg/cm2 prds, exhaust & vapour pipeline fabrication & erection from 10mm thk. m. s. plate, boiling house, platform work at various stations such as mill house, boiler, turbine,cranes, boiling house, c/f house etc. if required any where., fab & erection of double filteration system for quad & water inlet pipe in pan condenser., fabrication of electric motor cover., dis,fab & ere of final molasses pipeline, fab & erecdtion of m.s.vessels, square & rectangular tank, fab & erection of m.s.plate work, dis,fab & ere of coil(water,juice,ammonia,so2etc), fab and erection of motor bed, dismentling, fabrication & erection of perforated m.s plates of direct contact juice heaters., dismentling , fabrication & erection of strainers of injection, spray , c.t pumps., fabrication of exhaust valve casing, gutter work (bigger side will be treated as dia.), gutter work dismantling, gutter work fabrication, gutter work erection, fabrication / strenghting of beam, vessel, pipe, channel, angle etc., dismantling of m.s plate, dismantling, fabrication & erection of cone as per requirement, dismantling, fabrication & erection of spray pond header, dismantling, fabrication & erection of down tape of evaporator bodies, fabrication & erection of molasses jacket for batch type c/f m/c, dismantling, fabrication & erection of various stations for entertainment catcher, dismantling fabrication & erection vapour/exhaust line from quad to pan station, dismantling, fabrication & erection of bagassecillo line, dismantling, fabrication & erection of underground & outside pipeline of all sizes, boiler/turbine, cooling tower sugar godown/workshop/store/cane unloader & factory, fab & erection of gate, strengthning of tress beams,vessel,pipe with channel,angle,pipe etc any where, roof sheets /acc /iron sheet work. dis-, roof sheets /acc /iron sheet work. repair, roof sheets /acc /iron sheet work. replacement & erection, fab & erection of m.s.stair/ladder a) single story , double story, dismantling, fabrication & erection of underground and outside pipeline of all sizes, fabrication & erection of nrv of ct pump, dismantling, fabrication & erection of cooling tower pipeline from cooling tower of turbine, dis. of old damaged platform from boiler to turbine, fabrication & erection of platform (size- 1mtr width) from boiler to turbine material of old esp, misc .items., m.s pipeline per inch dia//ft/length (a ) dismentling of pipe line., upto 1 dia to 12 dia ., above 12 , fabrication of pipe line from m.s.plate or ready-made pipe any dia ., erection of pipe line per inch dia/ft/length (i) upto 1 dia to, erection of pipe line per inch dia/ft/length (ii. above 12 dia, m.s.pipe accessories work, dismantling of bends, tee, reducder, cross, elbow,nipple,nozzle, flanged, and bends. (per inch dia/ft/length ) (a) upto 1 dia to 12 dia, m.s.pipe accessories work, dismantling of bends, tee, reducder, cross, elbow,nipple,nozzle, flanged, and bends. (per inch dia/ft/length (ii.) above 12 dia., fabrication of bends, tee, reducer etc.-(p.inch dia/ft) (i) upto 1 diato 12 dia, fabrication of bends, t

CTN :41220777 Due date: 04 Aug, 202504 Aug, 2025 NA
Tender For supply of replacement and repair maint work of rpl no 12 c c - replacement of existing 04 x hinges of ramp as per sample inclusive all charges , replacement of existing ms iron beam and garder of ramp of front side of size 20 ft and thick 15 mm , repair and maint of ramp winch balancing problem and handle problem of pbs and sbs , replacement of existing 04 x ms iron air wind pipe of both side of size 2 ft 5 inch and 2 mm thick , replacement of existing 01 x fire hydrant valve and 1 x outlet valve as per sample , replacement of existing roof ms plate of sbs of master cabin of size 15 ft x 2 ft 4 inch and 3 mm thick and including ceiling remove and refixing , replacement of existing ms plate of port side near main engine of size 4 ft 4 inch x 3 ft 6 inch and thick 6 mm inclusive all charges. , replacement of existing ms plate of driver cabin bathroom of size 8 ft 4 inch x 3 ft and thick 6 mm and replacement of tile of driver cabin bathroom of size 5 ft 4 inch x 3 ft , supply and fixing of pvc pipe line connection from water tank to both side or bathroom and offr bathroom with kitchen of size l 185 ft, half dia and and , replacement of existing accelerator throttle of sbs and pbs as per existing specification with 20 mtr swr thick 4 mm , balancing, remetalling of existing sbs propeller fan with brass metal , replacement of rotary pump as per existing specification , replacement of existing 02 x transparent glasses of master cabin of size 24 inch x 18 inch and thick 3 mm inclusive all charges ) /bid number : gem/2025/b/6498570 * /dated: 25-07-2025 & & / bid document 1 / 13

CTN :41209039 Due date: 04 Aug, 202504 Aug, 2025 NA
Tender For tender for supply of mirror assy rear view , seal plain encased , bulb 24v-5w su 8.5 cap , light back up , light blackout , light warning , indicator bulb 21 w , lamp incandescent , buzzer , hose clip , oil seal , element oil filter , warning lamp rh indicator high beam , o ring oil drain , repair kit mechanical transmission , head lamp , light fog , lamp assortmenthelogen bulb 24v6065w , horn electrical f-8040800 6350-001099 , regulator assy rh window winding mc rh , repair kit msp-340 quadruple sys , filter assy shorter ii 77 mm , tail lamp rh , roof marker lamp rh , relay assy , top deck assy olive green , element oil filter , flasher solid state , lamp fluorescent bulb side lamp & tail , assy rear view mirror lhrh , arm wind screen wiper sa of wiper arm , stop light switch , electronic flasher kit

CTN :41224977 Due date: 05 Aug, 202505 Aug, 2025 46.5 Thousand
Tender For supply of replacement of engine oil , replacement of gear oil , replacement of clutch oil , replacement of brake oil , replacement of fuel filter , replacement of oil filter , replacement of air filter , replacement of coolant water , replacement of breather filter , replacement of ac filter , material and labour for opening of radiator and cleaning and refitting the same and testing complete , m and l for replacement of fuel tank sensor and checking complete , material for greasing of the bearing complete and testing , m and l fuel tank cleaning , m and l wheel alinnment complete and testing , m and l wheel balancing complete and testing , repair of wiper mechanism and change of wiper blade , m and l replacement of mud flapes , m and l replacement of side mirror left side with connections properly complete , m and l for taking out old gearlevel boot and replacement of the same with cover complete. , taking out of unserviceable inner reading light from the veh and replacement of the light seal beam front comma bulb comma socket and fixing the same complete , material for repair of wiring complete and testing same in all respect at extra light comma horn and indicator and checking complete , taking out of unserviceable indicator light front side from the vehicle and replacement of the light seal beam front comma bulb comma socket and fixing the same complete , m and l for car polishing complete , m and l for cleaning of battery terminal and replacement of battery cable , labour for vehicle tunup comma servicing complete checking of vehicle with macine and necessary repairing work

Central Government/Public Sector

CTN :41232378 Due date: 04 Aug, 202504 Aug, 2025 NA
Tender For providing of customized amc/cmc for pre-owned products - visit basis service contract for fault diagnosis / repair the fault of cnc electron beam welding machine sl no:ts-330 for a period of 03 years; as mentioned in technical bid document; annual maintenance con..

Central Government/Public Sector

CTN :41099908 Due date: 02 Aug, 202502 Aug, 2025 49.80 Lacs
Tender For corrigendum : providing of custom bid for services - ---- structral repair jobs in slab caster-1 cr & lift & turn stand overhauling of slab caster-1. replacement of damaged cross beam girder of manipulator of caster 1 & replacementof ducts and oh of impeller assembly.

State Government

CTN :41208648 Due date: 31 Jul, 202531 Jul, 2025 92.30 Lacs
Tender For special repair to bunglow no. 13 at shahibaug, ahmedabad. (repairing of wall and ceiling by plaster work, slab-beam-column special repairngthening work, flooring work, door - window work, toilet repairing work, colour work, fabrication work, water proofing work and other miscellaneous work)

Co-operative

CTN :41170145 Due date: 28 Jul, 202528 Jul, 2025 NA
Tender For compititive ebidding for job work of mill gate and center weighbridge repair weighing scales and beam scale for season 2025-26
 Loading, Please wait...

Connect us via What's Up