Latest joint filler Tenders | Government joint filler Tenders

State Government

CTN :45704980

30 Jun, 2026 NA

Ambala - Haryana

Tender For fixing bell mouths bailing out water from the trenches for making new connections in fully charged pipe-lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the engineer-in-charge. size of the main with which connection is to be made. 1. up to 200 mm internal diametre , providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint, earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. , demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) ,ement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size) ,cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 6. 1:4:8 (1 cement : 4 coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size) rain water spouts and pipes providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 2. 110 mm diameter

State Government

CTN :45705123

30 Jun, 2026 NA

Ambala - Haryana

Tender For cc interlocking paver blocks providing and laying 100mm thick factory made cement concrete interlocking paver block of m -35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (bis 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer-in-charge. , fixing bell mouths bailing out water from the trenches for making new connections in fully charged pipe-lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the engineer-in-charge. size of the main with which connection is to be made. 1. up to 200 mm internal diametre ,filter media providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint, earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil.,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) , cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size) ,cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 6. 1:4:8 (1 cement : 4 coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size),rain water spouts and pipes providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 2. 110 mm diameter

State Government

CTN :45705319

30 Jun, 2026 NA

Ambala - Haryana

Tender For cc interlocking paver blocks providing and laying 100mm thick factory made cement concrete interlocking paver block of m -35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (bis 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer-in-charge. , fixing bell mouths bailing out water from the trenches for making new connections in fully charged pipe-lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the engineer-in-charge. size of the main with which connection is to be made. 1. up to 200 mm internal diametre ,filter media providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint, earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil.,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) , cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size) ,cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 6. 1:4:8 (1 cement : 4 coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size),rain water spouts and pipes providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 2. 110 mm diameter

State Government

CTN :45705643

30 Jun, 2026 NA

Ambala - Haryana

Tender For fixing bell mouths bailing out water from the trenches for making new connections in fully charged pipe-lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the engineer-in-charge. size of the main with which connection is to be made. 1. up to 200 mm internal diametre , filter media providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint ,earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. ,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) ,a cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size) , a cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 6. 1:4:8 (1 cement : 4 coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size,na rain water spouts and pipes providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 2. 110 mm diameter

State Government

CTN :45705693

30 Jun, 2026 NA

Ambala - Haryana

Tender For fixing bell mouths bailing out water from the trenches for making new connections in fully charged pipe-lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the engineer-in-charge. size of the main with which connection is to be made. 1. up to 200 mm internal diametre , filter media providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint ,earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. ,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) ,a cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size) , a cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 6. 1:4:8 (1 cement : 4 coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size,na rain water spouts and pipes providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 2. 110 mm diameter

CTN :45678226

03 Jul, 2026 2.48 Lacs

Rajauri - Jammu And Kashmir

Tender For providing, installation, testing and commissioning of 750 mm diameter rubber expansion (r.e) joint along with allied works at l.i.s rajal

CTN :45657439

09 Jul, 2026 90.0 Thousand

Ghatampur - Uttar Pradesh

Tender For supply of rubber bush , brass lined rubber bush , suspension rubber buffer , hydraulic o ring for mill hydraulic , mill hydraulic rubber socket , flate ring for mill hydraulic , rubber channel , exhaust valve rubber seat , rubber seat for pan discharge , rubber seat , neoprime rubber seat , neoprime rubber mud seal , neoprime rubber u buffer , rubber bucket for pugmill , rubber bucket for hood cylinder , rubber bucket for brake cylinder , rubber bucket for brake cylinder , pneumatic valve rubber bucket , rubber stup for juice heater , expansion joint , neoprim rubber , neoprime rubber shee , rubber pad

Central Government/Public Sector

CTN :45657986

03 Jul, 2026 NA

Ernakulam - Kerala

Tender For dn12 flexible hose with 3/8" jic male ends (l= 500mm) , 65nb pn16 flg epdm rubber expansion joint , dn12 flexible hose with 3/8" bspt male ends (l= 500mm) , 50nb pn16 flg epdm rubber expansion joint

CTN :45675367

09 Jul, 2026 NA

Multi City - Jharkhand

Tender For auction sale of others - 1 v-belt a-40 06 nos. 2 v-belt a-42 02 nos. 3 v-belt a-49 18 nos. 4 v-belt a-59 02 nos. 5 rocker shaft with core plug 06 nos 6 copper joint 0.8 mm 11 nos 7 gasket for cummins make 08 nos 8 spring for valve kirloskar ra6 12 nos 9 bushing camshaft -2-7 03 nos 10 gasket wir out let cummins make 02 nos 11 banjo bolt 09 nos 12 banjo bolt for gear casing 04 nos 13 spacer 06 nos 14 retain fuel conn . gasket 40 nos 15 cut out 04 nos 16 gasket injfuel conn 28 nos 17 gasket 04 nos 18 screen oil pan 05 nos 19 lock 30 nos 20 cyl head gasket set 04 nos 21 hose 06 nos 22 hose 34 nos 23 hour meter 01 nos 24 piston complete rc-3 10 nos 25 ring 56 nos 26 connecting rod assembly 08 nos 27 cup for valve rn ¿ 6 06 nos 28 washer 03 nos 29 cylinder liner 06 nos 30 fuel pump coupler 01 nos 31 ball bearing double row 04 nos 32 dowel for connecting rod ra 6 12 nos 33 bushing 06 nos 34 liner ¿o¿ ring 02 nos 35 nut 78 nos 36 hose 03 nos 37 retainer coler & ring 12 nos 38 copper joint 0.5 mm 07 nos 39 guide valve stem 23 nos 40 rubber bush top size 08 nos 41 carbon bush m145 e 09 nos 42 rubber bush small size rc 8 06 nos 43 thermostat seal for kcl 08 nos 44 push rod 08 nos 45 copper joint 1.0mm 11 nos 46 stud for cy.head/short 12 nos 47 big end bearing 24 nos 48 stud for cyl head [long] ra-6 12 nos 49 joint for l.0 sump ra ¿ 6 02 nos 50 fuel injection pipe 01 nos 51 fuel filter element kcl 31 nos 52 relief valve 04 nos 53 starter [ c12 volts] 02 nos 54 starter with steel 01 nos 55 supply manifold assembly 02 nos 56 lock washer ra-6 12 nos 57 collects v[pair] for valve ra-6 12 nos 58 bush rubber bottom 06 nos 59 lock washer ra-6 12 nos 60 main bearing 0.20 u/s ra-6 14 nos 61 spring ra-6 12 nos 62 oil seal n.t.fwe ra-6 02 nos 63 joint for ra-6 10 nos 64 push rod tube 08 nos 65 joint for support ra-6 02 nos 66 l.o.pump complete ra-4/ra-6 01 nos 67 push rod ra-6 12 nos 68 core plug 04 nos 69 v.r lever with bush 12 nos 70 cap for rubber bush 08 nos 71 many fold fuel drain 02 nos 72 joint for pump 04 nos 73 fuel pipe pump to filter 03 nos 74 complete set of joints 02 nos 75 injector complete 06 nos 76 connecting rod 06 nos 77 cy lender liner 01 nos 78 piston ring oho c/s 12 nos 79 hose 13 nos 80 hose 01 nos 81 valve spring 24 nos 82 diesel filter 18 nos 83 connecting rod bearing 12 nos 84 l.f.bearing 10u/s 05 nos 85 main bearing bush ruston 02 nos 86 small end bush 06 nos 87 main bearing seal ruston 01 nos 88 valve guide ruston 04 nos 89 thrust washer 06 nos 90 piston assly [std] 11 nos 91 reliet valve assly 02 nos 92 oil seal ruston 02 nos 93 banjo bolt with tail 03 nos 94 exhaust silencer 02 nos 95 filter dise 12 nos 96 adaptor for filtr 03 nos 97 washer connecting rod 12 nos 98 main bearing narrow 10u/s 06 nos 99 connecting rod 20 nos 100 main bearing wide 20u/s 05 nos 101 joint 04 nos 102 gasket 07 nos 103 v belt a/57 01 nos 104 piston ring 02 nos 105 corrosion register 01 nos 106 banjo bolt belt 08 nos 107 guide for valve 06 nos 108 bushing gear cover 04 nos 109 piston ring 18 nos 110 cir clip ra-6 12 nos 111 piston pin ra-6 06 nos 112 fuel filter elements (pre) 18 nos 113 fuel filter elements (micro) 19 nos 114 expansion bellow of outlet 02 nos 115 banjo bolt (hallow bolt) 01 nos 116 banjo bolt 01 nos 117 copper washer 12 nos

CTN :45628776

22 Jun, 2026 42.78 Lacs

Delhi - Delhi

Tender For annual repair and maintenance of to goi press colony gpra qtrs at mayapuri new delhi during 2026-27 sh-supply of painting material for external finishing- anti-termite pesticides -(imidacloprid) , cement opc/ppc, , cement - white, , admixture for concrete, , reinforcement steel (thermo-mechanically treated bars (fe 550 d), , alccofine, , mechanical couplers for reinforcement, , ready mix cement concrete, , architecture expansion/seismic joint system, , expansion filler board premoulded compressible (non bituminous), , concrete curing compound, , core cutting, , expanded polystyrene sheet (eps), , soil anchor for diaphragm wall, , pvc water stop, , ready mix polymer jointing cement mortar, , glass brick/glass block, , all type of door lock, floor spring, door closer including mortice locks, , customised door window hardware /joinery fittings, , flush door shutter, , aluminium, , façade and window system, , fire stop in curtain wall system, , pop out vent for façade and system window hardware, , aluminium glass partition system, , aluminium openable louver, , air transfer grill, , fire rated glazed door, , metal fire rated doors, , wooden fire rated doors, , fire rated hardware & system, , fire seal, fire smoke seal, , fire rated glass, , fire rated rolling shutter, , fire curtain, , glass shower partition, , modular toilet cubical, , laminates, , compact laminate sheet, , polysulphide sealant/pu sealant, , glass & mirror, tinted glass,, , high performance glass, reflective glass, lacquered/back painted glass all superior quality, , silicone sealant, , polyester powder coating/pvdf coating, , wired glass, figured/pattern glass, , acoustic seal / door seal, , pvb/sgp laminate film, sentry film, , wood adhesive, , frosted film, , bmu/ façade cleaning system, , dry stone cladding undercut anchor, , stone sealer, , water & stain repellant coating for stone cladding and stone flooring, , gypsum lightweight plaster, , ready mix cement plaster, , crystalline integral, , waterproofing, , water proofing compound, , water proofing membrane (pvc/hdpe)/water, , proofing coating (pu/polyurea/ acrylic/elastomeric cementitious) / sri coating/pitch pu, , water stops - hydrophilic swellable rubber strip (non bentonite type), , polyurethane over deck insulation foam, , food grade epoxy coating for water tank, , vitrified tiles, , tiles/stone fixing adhesive/epoxy grout, , polyurethane concrete flooring, epoxy flooring, self leveling flooring, , wooden flooring and skirting, , raised/false access flooring system, , solid surface (corian), , car deck flooring system, , engineered marble, , rubberized sports flooring (gym flooring), , stainless steel, , structure steel & hollow section-primary producers only, , , , , , access panel in false ceiling system, acoustic panel, aluminium/metal ceilings (baffle and open cell ceiling), aluminum panels, anchor fastener, rebar, chemical/mechanical fastener, expandable fasteners, b, bonded particle board, cement fiber board/ cement, d, dry wall gypsum partition/paneling system for toilet, gypsum wall paneling, , , , , , , grg/gi suspended ceiling grid system & close/ c stud framing system, gypsum ceiling system (plain/perforated),, i c, non shrink cementious precision (anchoring) grout, paint - acrylic emulsion (exterior), paint - anti carbonation paint, paint - plastic emulsion (internal), paint - pu & epoxy paint and primer, paint - synthetic enamel, paint texture paints (interior), plywood (all plywood shall be procured from fully owned factory of the manufacturer and not from jv / outsourced), pu polish for wood work, rock wool/glass wool insulation, , , , , , ss modular railing system, steel (ms) rolled section & plate, steel hollow sections, t, tile trim/threshold, veneer, white cement based putty, soft board, , polycarbonate sheet/skylight, , c, , galvanized/galvalume roofing sheet and accessories d, , pre cast concrete landscape elements, gratings, kerb, drain cover, , preca

Joint Filler Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

Central Government/Public Sector