Latest joint box Tenders | Government joint box Tenders

Central Government/Public Sector

CTN :42353783

07 Nov, 2025 3.49 Crore

Sonbhadra - Uttar Pradesh

Tender For supply of trailing cable, 6.6kv, unarmoured, 3 x 25+ 2 x 25/2+ 1 x 16 sq. mm , trailing cable, 6.6kv, unarmoured, 3 x 35+ 2 x 35/2+ 1 x 16 sq. mm , trailing cable, 6.6kv, unarmoured, 3 x 50+ 2 x 50/2+ 1 x 16 sq. mm , trailing cable, 6.6kv, unarmoured, 3x 70+ 2 x 70/2+ 1 x 35 sq. mm , trailing cable, 6.6kv, unarmoured, 3 x 150+ 2 x 150/2+ 1 x 35 sq. mm

Central Government/Public Sector

CTN :42424475

05 Nov, 2025 NA

Kendujhar - Odisha

Tender For supply of item 10 , item 20 , item 30 , item 40 , item 50 , item 60 cable,trg,atc,3.3kv gr,3.5cx50mm2,is9968 size & tvpe 3.5cx50 sq. mm 3.3 kv grade flexible atc conductor of class-s, epr le-3, insulated &black hofr nbr pvc type se-4 sheathed flexible trailing cable suitable for reeling/un-reeling operation. cable type- flexible, standard: is 9968(part 2) 2002 d.c. resistance at 20deg. c (ohms/km) power core max- 0.393 earth core max - 0.795. annealing test in %- (before stranding) 13.5 %. per sulphate test in g/m2- max. 5.00. conductor screeninq power core only material approx thickness mm - extruded semiconducting compound/ extruded semi conducting tape- 0.80. conductor material: annealed tinned copper, 6.6 klv grade, cable type: flexible, standard: is 9968(part 2) 2002 tests on insulation thickness (nom) mm core ldentification - power core-2.20 colour rpct red, yellow & blue for power cores & green for earth core tensile strength before ageing n/mm2- min.4.20 % variation after ageing (air oven)- max. +-30% % variation after ageing in (air-bb)- max. +- 30%. elongation before ageing in % - min.200% % variation after ageing (air oven)- max. +- 30% % variation after ageing in (air-bb)- max. +- 30%. hot set test hot set elongation- 175% permanent set 15%. lnsulation resistance constant (min.) m ohm km. at 27deg.c- min. 3670 at 90 deg.c-min 3.67. thick of lnner sheath min 2.00 mm. rein forcement- open braid of textile material physical test on outer sheath thickness (nom) / min mm- 3.50/ 2.60 colour black, over all diameter of cable mm- 52.00+-3.00. tensile strength ) /bid number : gem/2025/b/6811700 * /dated: 24-10-2025 & & / bid document 1 / 22 before ageing n/mm2 - min. 11.0 at 2oo elongation 4n/ sq. mm. % variation after ageing in (air-bb)-max. +- 50% elongation before ageing in %- min.250% % variation after ageing in (air-bb)- max. + 50%. hot set test hot set elongation- max.175% permanent set- max 15. oil resistance test variation in % in tensile strength- max. +-40% variation in % in elongation-max. +-40%. tear resistance in n/mm - min.5.0. flammability test period of burning after removal of flame- max. 60 sec. min unaffected portion from the lower edge of the top clamp - min 50 mm. test high voltage at room temp- 10 kv ac for 4 hours. water absorption test increase in capacitance 1 to 14 days max- 6% 7 to 14 days max- 2.5%., control trailing cable 12 c x 2.5 3 p x 1.5 (pair screened) 2 voltage grade 1.1 kv 3 reference standard generally confirming to is: 9968 (part- 1)1998 4 conductor a. material to is:8130/84 annealed tinned copper b. nominal area of cross section(sq. mm) i)-unscreened core (sq. mm.) 2.5 ii) - screened pair (sq. mm.) 1.5 c. flexibility class as per is:8130/84 class-5 d. maximum dc resistance of conductor at 20 deg. c i)-unscreened core (ohms/km) 8.21 ii)- screened pair (ohms/km) 13.7 5 insulation i) material epr type ie-2 to is:6380/84 ii) nominal thickness (mm) 1.0 6 two cores of 1.5 sq. mm. size twisted together to form a pair yes. 7 individual pair screening each pair of 1.5 sq. mm. size taped with rpct, screened with 0.2 mm nom dia of annealed tinned copper wires braid, taped with melinex tape. yes. 8 no of cores / pair i)-unscreened cores 12 ii)-screened pairs 3 9 identification of power cores by number printing on cores. 10 laying up (i) three screened pairs laid up together, taped with rubber proofed cotton tape to form group as "a" (ii) 12 unscreened control cores laid up together around group as "a" of screened pairs and taped with rubber proofed cotton tape applied with open spiral. 11 inner sheath a) material to is: 6380/84 hd hofr csp type se-4 b) minimum thickness (mm) 1.6 12 an open braid of nylon cord reinforced in between inner and outer sheath. yes. 13 outer sheath a) material to is: 6380/84 hd hofr csp type se-4 b) nominal thickness (mm) 2.5 14 nom. overall diameter of cable (mm) 33.0 tolerance on nom. overall diameter (mm) /- 2.0 15 max. safe pulling tension lo

Central Government/Public Sector

CTN :42360234

07 Nov, 2025 NA

Raigad - Maharashtra

Tender For supply of 4c x 25 sqmm cop cond trailing cable

CTN :42283539

27 Oct, 2025 NA

Tinsukia - Assam

Tender For corrigendum : supply of cable parking break no 1,suspension bush kit,sealant liquid gasket,line shoe assy trailing,injector assy,shaft assy propeller,spring assy rear,speed sensor agb,rear view mirror,air compressor head,tie rod end steering,fuel cum water seprator,key ignition,belt v ribbed,injector assy fuel,cover assy clutch,pad,armature assy,field coil assy,nozzle

CTN :42359900

07 Nov, 2025 28.14 Lacs

Brajrajnagar - Odisha

Tender For supply of lhd trailing cable is: 14494

CTN :41967787

23 Oct, 2025 80.0 Thousand

Jaipur - Telangana

Tender For corrigendum : procurement of spares for hea (high energy arc) igniters installed in boilers of both units at stpp, jaipur, mancherial, telangana. - roof bolts, m.s. bolts & nuts, rivets, washers & screws, dog nails, fish plates, nuts & bolts for fish plates, belt jointing pins, cable hooks and signal hooks, belt conveyor rollers, belt sections, resin capsules, cement capsules, gi canisters, blasting gallery – spacers, radiator repairs, repairs and rewinding of motors of ac & dc, repairs / rewinding of transformers (welding / lighting/ power), gi wire, wire mesh for longwall salvage, manufacturing of supply of electrical coils for, i) ac motors up to 6.6 kv grade, ii) transformer coils up to 33 kv grade, repairs of rotors for electric motor, lighting cable, steel chock manufacturing, house wiring, all types of fan repairs, shovel bucket welding, repairs of pumps, couplings manufacturing, special steel and alloy castings (tooth points, track pads, mn steel, casting), manufacturing of fly ash bricks. (not to be manufactured at stores site. it, shall be at their own site)., manufacturing of pump components (spares)., transformer oil filtration, reconditioning of drill bits and drill rods, vulcanizing the old trailing cables of drill machines, sdls, lhds, etc., work should be carried out at the respective mine premises)., manufacturing of earth clamps, g.i flats, g.i bolts and nuts., crimping of hydraulic hoses., repairs to hydraulic pumps, motors, control valves and other related, components, refurbishing of lt & ht switches with oem spares including testing., manufacturing / repairs of slip rings & d-contacts., furniture repairs i.e., cane chairs, table, almirahs, etc., repairs to wet grinders, water purifiers, and water coolers, manufacturing of coupling bolts of all sizes, fabrication of oht line components like cross arms, clamps, stay wires,, cross brassings, base plates etc., manufacturing of haulage rope drum rollers., all sizes of ventilation doors., safety boards designing/stickering/painting with retro-reflective radium, papers/paint on hemm/radium stickering in underground & surface,, radium boards, safety boards & radium jackets, fabrication of lighting & cable cross over towers, maintenance & repairs of air conditioners on hemm, painting work in underground and on surface, fabrication and erection of ms structural works like gantry, bunker etc., tailoring works at hospitals & area workshops, manufacturing of hume pipes, clay pills manufacturing, maintenance of pmts/lighting transformers/power transformers & substations, erection/renovation of residential/pmts/sb-station earth pits, (conventional type/chemical type), testing of all protective relays & mprs, tub assembling/repairing of coal tubs in mines, ci casting works like ci pulley, tub wheels, outsourcing works in mines, like masonary walls construction, surface, material loading, cleaning and dusting in underground etc., all types of computer software installation, antivirus, hardware and, network installation., cc cameras installation and repairs.

CTN :42404033

31 Oct, 2025 NA

Dehradun - Uttarakhand

Tender For supply of 4u rack,poe switch 4 port,cat 6 wire 305 mtr,camera 4mp,pvc rack,4x4 camera box,nvr 32 channel,nvr 16 channel,nvr 4 channel,hard drive 10 tb,hard drive 2 tb,hard drive 1 tb,rj 45 connector,fiber cable 6 core,monitor 50 inch,joint box,patch cord,face plate,ptz camera,monitor 24 inch,installation of camera,fiber and cat 6 wire installation,media connector

CTN :42337974

31 Oct, 2025 1.20 Crore

Multi City - Karnataka

Tender For supply of trailing 5 core 35 sqmm cable

Central Government/Public Sector

CTN :42340722

03 Nov, 2025 52.77 Lacs

Singrauli - Madhya Pradesh

Tender For trailing cable shifting work of 04nos. draglines for a period of two years (except sundays) at amlohri project

State Government

CTN :42305871

06 Nov, 2025 NA

Kheda - Gujarat

Tender For supply of 6.6 kv epr insulated flexible trailing power copper cable for elecon make stacker cum reclaimer machine of coal handling plant at wtps

Joint Box Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government