Latest joint filler Tenders | Government joint filler Tenders

Central Government/Public Sector

CTN :45738140

10 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For non metallic expansion joint

CTN :45720703

30 Jul, 2026 2.00 Crore

Chhatarpur - Madhya Pradesh

Tender For inviting rates of different items for construction of diffrent type of work as per demand on cm help line or ward parsad or public - supply of handpump material 2026-27, excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead up to 1000 m as per section-300 of the specifications.item no nvi-3.12, construction of embankment/sub-grade/earthen shoulders with material obtained from other sources, as per provisions of section 305 of the specifications, with approved materials/soil confirming to requirements given in table 301-1 of specifications including all lead and lifts, including cost of watering, compaction by vibratory roller/heavy pneumatic type roller etc. confirming to requirements given in table 301 2 of the specifications complete.item no nvi-3.12, construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, including all lifts and lead complete in all respect as per section-400 of the specifications.by mix in place method item no nvi -4.1.1.1, construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 of the specifications, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per section 601 of specifications.item no nvi- 6.1.1, providing and laying cement concrete grade m-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm).item no nvi-6.4, construction of dowel jointed, plain cement concrete pavement in m-30 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to is:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per irc:15 and as per section-602 of the specifications complete excluding cost of steel in dowel bar and tie rod etc.item no nvi-6.2.1, earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.disposed earth to be levelled and neatly dressed.all kinds of soil item no nii 2.6.1, demolishing cement concrete manually/by mechanical means including disposal of material with in 50 meters lead as per direction of engineer-in-charge.1:3:6 or richer mixitem no nii

CTN :45506211

01 Jul, 2026 NA

Kalyani - West Bengal

Tender For bid to ras corrigendum : supply of inlet expansion joint (non-metallic) , for 2720 mm dia. si. bcb-92 id fan, drg. no. : sketch no. 25120c-1 , outlet expansion joint (non-metallic) , for 2720 mm dia. si. bcb-92 id fan, drg. no. : sketch no. 25120c-

CTN :45628844

27 Jun, 2026 30.56 Lacs

Mussoorie - Uttarakhand

Tender For annual repair and maintenance of non-residential building of lbsnaa, mussoorie. during 2026-27. (sh:- supplying materials required for day to day maintenance). (2nd call).subwork/packages:supplying materials- ordinary portland cement/ppc white cement reinforcement steel tmt bars , structural steel, , water proofing compounds, admixtures, plasticizer, super plasticizer, curing compounds, , proofing integral water compound with cement (for plaster & mortar), , water proofing for bathroom/file/balcony & other et areas, , crystalline water proofing compound, , polycarbonate sheet, , profile steel sheet, , partice board, , laminates, , flush door shutters, , fire rated doors, , hardware/fixtures/fittings for induding fire rated doors glazed fire nated doors, , fire rated class, , false ceiling system, , plywood/veneer, , melamine polish, , floor spring & door closure, , aluminium section, , aluminium door/window partitions fabricators, , anodised aluminium hardware heavy duty), , clear float/frosted/toughened glass/refractive class, , stainless steel falling accessories etc., , door window & fittings, , silicon based repellantweathersealant, , poly-sulphide sealant, , mosaic tiles/chequered tiles, , ceramic tiles, , vitrified (antiskid/matt/glazed qvt vitrified tile permitted), , tiles (only, , grouts, tile adhesive, , paver block & kerbstone, , desh/anchoring fasteners, , cement based wall putty, , oil bound washable distemper dry distemper, , 1st quality acrylic distemper/dry distemper, , acrylic emulsion paints, , plastic emulsion paints, , premium acrylic paints (interior), , emulsion, , textured exterior paint, , acrylic smooth exterior paint, , premium smooth acrylic exterior paint with silicon additive., , cement primer, , steel primer (red oxide zinc chromate primer), , wood primer, , epoxy paint, , fire paint, , g.l/ms. pipe, , g.l. fittings, , hdpe pipes, , di pipes, , di pipes, , cpvc pipe and fittings, , centrifugally cast spur) rom pipes & fittings, , c.i. manhole covers, frames, & of gratings, , sfrc manhole covers & gratings, , cp brass fittings (superior range), , cp brass fittings (normal range), , minor class, , sanitary ware, fittings & accessories (superior range), , sanitary ware, fittings accessories (normal range), , &, , stainless steel sink, , rcc pipes (np-2), , upvc doors & windows & theis (profile makers authorized fabricators only), , extruded polystyrene insulation board, , heat resistant tiles, , gypsum plaster, , floor hardener, , modular expansion joint, , glass wool, , upvc doors and window hardware, , ready mixed plaster, , aluminium composite panel, , designer coloured concrete floor tiles for outdoor use., , fibre glass shelf, , float class, , frp shutters, , hydraulic door closer/spring, , metal false selling, , mineral fibre celling, , acoustic panels and celling, , clay tiles on roof, , orissa pan, , ppr pipes, , plastic connection pipe, , pvc rain water pipe & fitting, , 18:13502 type a&b, , pvc shutter, , pvc tank, , 88 ralling, , towel ring towel rod/towe fack, , rmc (ready mix concrete), , mangalore tiles, , rcc door frame, , galvalume sheet, , ptmt, , anti carbonation paint, , fly ash bricks, , aac block, , aac block adhesive, , puf sandwich panel, , polymer based contentious water proof coatings/polyure beatment, , expension joint filler joint wires, , expension fillerboard, , roller/froman/vertical blinds, , wpc, , peb buildings, , frp manhole covers & ratings, , frp sheets & cutters, , solar module structures mounting, , upvc door window reinforcement channels, , moduler containerized shelters, , light gauge steel framing systems, , grid suspension ceiling system (t-grids), , polyurethane binder, , , , flooring, , , , wooden, , fibreglass reinforced asphalt roof shingle, , cement fibre boards

State Government

CTN :45397974

24 Jun, 2026 80.77 Lacs

Kota - Rajasthan

Tender For corrigendum : work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all l

CTN :45252384

20 Jun, 2026 36.91 Lacs

Baramulla - Jammu And Kashmir

Tender For bid to ras supply of constr of amn pd of size 2.4m x 2.4m , soak pit of size 1.0m x 1.0m , quick setting compound , hydrophobic poreblocking ingredients , manufactured sand , aggregate 20mm. , aggregate 40mm. , aggregate 63mm. , pcc soild blocks size 400mm x 200 mm x 200 mm , integral water proofing compound , mild steel tmt bars 08 mm di , ms binding wire , ply wood 2.00m x 0.30m and 12mm thick , ply wood 10 mm , ismb conforming size 150 x 75mm , ismc size 75 x 40mm , 5mm thick ms plate , 4 nos x 16mm dia 100mm long foundation bolt , steel roofing trough 2000x613x180mm , hdpe sand bag of size 75x40 cm , pbs roll , ppgi sheets 3270 x 1000 x 0.60mm thick , 3.00 m long rectangular hollow section of size 66x33x2.90 , 2.30m long rectangular hollow section size 66 x 33 x 2.90mm , 150mm long ms angle of size 50x50x6mm , self taping screw 80mm , silicone gel sealan , bitumen for filling of expansion joint , hdpe sheet , prefabricated steel loop hole size 600mm x450mm , prefabricated steel door size 900mm x1800mm , ms rack of size 1.22m x 0.61m x 1.65m , pre fab welded door ismc 200 x 75mm , pre fab welded window loop hole , common burnt clay building bricks , synthetic enamel pain , red oxide primer , oil bound distemper , polyurethane thinner , chalk white , cement base paint , bricktrowel , drop forged high grade , lightweight extruded aluminum alloy straight edge , plaster trowel , 16 inch 400mm diameter mortar pan tasla , high tenacity nylon monofilament line , cast iron plumb bobs , heavy duty metal hand rammers , heavy duty pickaxes , shovel square , single piece hot-forged carbon steel powrah , high quality heavy duty flat painting brush , non slip heavy duty industrial rubber gloves , aluminium spirit levels 12 inch , transparent flexible pvc water leveling tubes , heavy duty combination cutting pliers , non metallic fiberglass measuring tape 15 mtr , heavy duty crow bar 5 feet , wooden flat , prefabricated gel earthing electrode of pipe , gi pipe 100 mm dia med grade , back filled compound , ms earth pit cover of size 30 cm x 30 cm with handle , aluminium strip size 25mm x 3mm 9.00m long , iron spikes 16 inch long , gi strip of size 32 x 6mm, 3.00m long , gi nipple 20mm dia and 10cm long , gi reducer socket 40x20mm , lightning air terminal a copper tube 150 cm long x 25 mm dia , ms clamp 40x2mm with nut and bolt complete , gi wire 12 gauge , earth augur , upvc pipe 3m long 6 inch dia , user manual , tester set , gi pipe medium grade 40mm dia, 6 mtr long , gi pipe 40 mm bore 2m long , 50 mm bore gi pipes sleeve , crystaline condcutive mixture , fire extinguisher 2 kgs capacity

CTN :45596489

24 Jun, 2026 NA

Pulwama - Jammu And Kashmir

Tender For procurement of key materials for mgnrega works for panchayat halqa aripal - seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cement unserrated adjustable ridge for hips, fibre (high impact poly propelene reinforced) cement corrugated apron piece, fibre (high impact poly propelene reinforced) cement eaves filler piece, fibre (high impact poly propelene reinforced) cement north light curves, non-asbestos fibre (high impact poly propelene reinforced) cement ventilator curves, fibre (high impact poly propelene reinforced) cement barge boards 6 mm thick, fibre (high impact poly propelene reinforced) cement ridge finial, fibre (high impact poly propelene reinforced) cement special north light curves, fibre (high impact poly propelene reinforced) cement s type louvers, multi purpose fibre (high impact poly propelene reinforced) cement board 6 mm thick, multi purpose fibre (high impact poly propelene reinforced) cement 8 mm thick, 6 mm thick heavy duty fiber cement board, 8 mm thick heavy duty fiber cement board, 9 mm thick heavy duty fiber cement board, 12.5 mm thick gypsum plaster board, 6 mm thick multipurpose cement bonded wood particle board conforming to is : 14276, 8 mm thick multipurpose cement bonded wood particle board conforming to is : 14276, brick aggregate (single size):63 mm nominal size, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, safeda ballies 125 mm diameter, cowdung, bajiri, bamboo 25 mm dia 2.5 meter long, bhusa, paving bitumen of grade vg 10 of approved quality, bitumen emulsion, bitumen grade pmb - 40, blown type petroleum bitumen of penetration 85/25 of approved quality, bitumen hot sealing compound : grade a, bitumen solution primer of approved quality, premoulded joing filler 12 mm thick, bitumen felt fibre base (vegetable or animal): type 2 grade 1, bitumen felt as per is 7193 grade ii, bitumen felt : type 3 grade 1, separation membrane of impermeable plastic sheeting 125 micron thick, coal tar, blasting powder, blasting fuse (fuse wire), white face insulating board : 12 mm thick, natural colour insulating board : 12 mm thick, flame retardant face insulating board : 12 mm thick, flame retardant face inslulating, impregnated fibre board 12 mm thick, flat pressed 3 layer particle board (medium density) grade 1,12 mm thick, extra for veneered particle board with : teak veneering on one side and commercial veneering on other side, extra for veneered particle board with commercial veneering on both sides, extra for veneered particle board with teak veneering both sides, curing compound, integral cystalline slurry, integral crystalline admixture, crystalline mortar, integral cystalline dry shake, swellable type water stop tape, primer for swellable type wate stop tape, polymer modified adhesive mortar, brick bats, wire brush, soft brush, portland cement, white cement, plastic sheath,1.25 mm thick for dowel bars, coal (steam), sealant primer, cramp gun metal 25x6x300 mm, pre moulded joint filler, 25mm thick for expansion joint, bright finished or black enameled mild steel butt hinges 125x65x2.12 mm, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black

CTN :45596491

23 Jun, 2026 NA

Baramulla - Jammu And Kashmir

Tender For procurement of key materials for mgnrega works for all panchayats block wailoo - seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cement unserrated adjustable ridge for hips, fibre (high impact poly propelene reinforced) cement corrugated apron piece, fibre (high impact poly propelene reinforced) cement eaves filler piece, fibre (high impact poly propelene reinforced) cement north light curves, non-asbestos fibre (high impact poly propelene reinforced) cement ventilator curves, fibre (high impact poly propelene reinforced) cement barge boards 6 mm thick, fibre (high impact poly propelene reinforced) cement ridge finial, fibre (high impact poly propelene reinforced) cement special north light curves, fibre (high impact poly propelene reinforced) cement s type louvers, multi purpose fibre (high impact poly propelene reinforced) cement board 6 mm thick, multi purpose fibre (high impact poly propelene reinforced) cement 8 mm thick, 6 mm thick heavy duty fiber cement board, 8 mm thick heavy duty fiber cement board, 9 mm thick heavy duty fiber cement board, 12.5 mm thick gypsum plaster board, 6 mm thick multipurpose cement bonded wood particle board conforming to is : 14276, 8 mm thick multipurpose cement bonded wood particle board conforming to is : 14276, brick aggregate (single size):63 mm nominal size, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, safeda ballies 125 mm diameter, cowdung, bajiri, bamboo 25 mm dia 2.5 meter long, bhusa, paving bitumen of grade vg 10 of approved quality, bitumen emulsion, bitumen grade pmb - 40, blown type petroleum bitumen of penetration 85/25 of approved quality, bitumen hot sealing compound : grade a, bitumen solution primer of approved quality, premoulded joing filler 12 mm thick, bitumen felt fibre base (vegetable or animal): type 2 grade 1, bitumen felt as per is 7193 grade ii, bitumen felt : type 3 grade 1, separation membrane of impermeable plastic sheeting 125 micron thick, coal tar, blasting powder, blasting fuse (fuse wire), white face insulating board : 12 mm thick, natural colour insulating board : 12 mm thick, flame retardant face insulating board : 12 mm thick, flame retardant face inslulating, impregnated fibre board 12 mm thick, flat pressed 3 layer particle board (medium density) grade 1,12 mm thick, extra for veneered particle board with : teak veneering on one side and commercial veneering on other side, extra for veneered particle board with commercial veneering on both sides, extra for veneered particle board with teak veneering both sides, curing compound, integral cystalline slurry, integral crystalline admixture, crystalline mortar, integral cystalline dry shake, swellable type water stop tape, primer for swellable type wate stop tape, polymer modified adhesive mortar, brick bats, wire brush, soft brush, portland cement, white cement, plastic sheath,1.25 mm thick for dowel bars, coal (steam), sealant primer, cramp gun metal 25x6x300 mm, pre moulded joint filler, 25mm thick for expansion joint, bright finished or black enameled mild steel butt hinges 125x65x2.12 mm, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or b

CTN :45596492

23 Jun, 2026 NA

Baramulla - Jammu And Kashmir

Tender For procurement of key materials for mgnrega works for all panchayats block narvaw - seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cement unserrated adjustable ridge for hips, fibre (high impact poly propelene reinforced) cement corrugated apron piece, fibre (high impact poly propelene reinforced) cement eaves filler piece, fibre (high impact poly propelene reinforced) cement north light curves, non-asbestos fibre (high impact poly propelene reinforced) cement ventilator curves, fibre (high impact poly propelene reinforced) cement barge boards 6 mm thick, fibre (high impact poly propelene reinforced) cement ridge finial, fibre (high impact poly propelene reinforced) cement special north light curves, fibre (high impact poly propelene reinforced) cement s type louvers, multi purpose fibre (high impact poly propelene reinforced) cement board 6 mm thick, multi purpose fibre (high impact poly propelene reinforced) cement 8 mm thick, 6 mm thick heavy duty fiber cement board, 8 mm thick heavy duty fiber cement board, 9 mm thick heavy duty fiber cement board, 12.5 mm thick gypsum plaster board, 6 mm thick multipurpose cement bonded wood particle board conforming to is : 14276, 8 mm thick multipurpose cement bonded wood particle board conforming to is : 14276, brick aggregate (single size):63 mm nominal size, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, safeda ballies 125 mm diameter, cowdung, bajiri, bamboo 25 mm dia 2.5 meter long, bhusa, paving bitumen of grade vg 10 of approved quality, bitumen emulsion, bitumen grade pmb - 40, blown type petroleum bitumen of penetration 85/25 of approved quality, bitumen hot sealing compound : grade a, bitumen solution primer of approved quality, premoulded joing filler 12 mm thick, bitumen felt fibre base (vegetable or animal): type 2 grade 1, bitumen felt as per is 7193 grade ii, bitumen felt : type 3 grade 1, separation membrane of impermeable plastic sheeting 125 micron thick, coal tar, blasting powder, blasting fuse (fuse wire), white face insulating board : 12 mm thick, natural colour insulating board : 12 mm thick, flame retardant face insulating board : 12 mm thick, flame retardant face inslulating, impregnated fibre board 12 mm thick, flat pressed 3 layer particle board (medium density) grade 1,12 mm thick, extra for veneered particle board with : teak veneering on one side and commercial veneering on other side, extra for veneered particle board with commercial veneering on both sides, extra for veneered particle board with teak veneering both sides, curing compound, integral cystalline slurry, integral crystalline admixture, crystalline mortar, integral cystalline dry shake, swellable type water stop tape, primer for swellable type wate stop tape, polymer modified adhesive mortar, brick bats, wire brush, soft brush, portland cement, white cement, plastic sheath,1.25 mm thick for dowel bars, coal (steam), sealant primer, cramp gun metal 25x6x300 mm, pre moulded joint filler, 25mm thick for expansion joint, bright finished or black enameled mild steel butt hinges 125x65x2.12 mm, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or b

CTN :45596493

23 Jun, 2026 NA

Baramulla - Jammu And Kashmir

Tender For procurement of key materials for mgnrega works for all panchayats block rafiabad. ( except panchayat halqa behrampora a, hib-dangerpora, rawoocha, yarbugh). - seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cement unserrated adjustable ridge for hips, fibre (high impact poly propelene reinforced) cement corrugated apron piece, fibre (high impact poly propelene reinforced) cement eaves filler piece, fibre (high impact poly propelene reinforced) cement north light curves, non-asbestos fibre (high impact poly propelene reinforced) cement ventilator curves, fibre (high impact poly propelene reinforced) cement barge boards 6 mm thick, fibre (high impact poly propelene reinforced) cement ridge finial, fibre (high impact poly propelene reinforced) cement special north light curves, fibre (high impact poly propelene reinforced) cement s type louvers, multi purpose fibre (high impact poly propelene reinforced) cement board 6 mm thick, multi purpose fibre (high impact poly propelene reinforced) cement 8 mm thick, 6 mm thick heavy duty fiber cement board, 8 mm thick heavy duty fiber cement board, 9 mm thick heavy duty fiber cement board, 12.5 mm thick gypsum plaster board, 6 mm thick multipurpose cement bonded wood particle board conforming to is : 14276, 8 mm thick multipurpose cement bonded wood particle board conforming to is : 14276, brick aggregate (single size):63 mm nominal size, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, safeda ballies 125 mm diameter, cowdung, bajiri, bamboo 25 mm dia 2.5 meter long, bhusa, paving bitumen of grade vg 10 of approved quality, bitumen emulsion, bitumen grade pmb - 40, blown type petroleum bitumen of penetration 85/25 of approved quality, bitumen hot sealing compound : grade a, bitumen solution primer of approved quality, premoulded joing filler 12 mm thick, bitumen felt fibre base (vegetable or animal): type 2 grade 1, bitumen felt as per is 7193 grade ii, bitumen felt : type 3 grade 1, separation membrane of impermeable plastic sheeting 125 micron thick, coal tar, blasting powder, blasting fuse (fuse wire), white face insulating board : 12 mm thick, natural colour insulating board : 12 mm thick, flame retardant face insulating board : 12 mm thick, flame retardant face inslulating, impregnated fibre board 12 mm thick, flat pressed 3 layer particle board (medium density) grade 1,12 mm thick, extra for veneered particle board with : teak veneering on one side and commercial veneering on other side, extra for veneered particle board with commercial veneering on both sides, extra for veneered particle board with teak veneering both sides, curing compound, integral cystalline slurry, integral crystalline admixture, crystalline mortar, integral cystalline dry shake, swellable type water stop tape, primer for swellable type wate stop tape, polymer modified adhesive mortar, brick bats, wire brush, soft brush, portland cement, white cement, plastic sheath,1.25 mm thick for dowel bars, coal (steam), sealant primer, cramp gun metal 25x6x300 mm, pre moulded joint filler, 25mm thick for expansion joint, bright finished or black enameled mild steel butt hinges 125x65x2.12 mm, bright finished

Joint Filler Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government