Latest juice tank Tenders | Government juice tank Tenders

CTN :45717001

13 Jul, 2026 5.61 Lacs

Saharanpur - Uttar Pradesh

Tender For tender for satisfactory trial. , carry out strengthening work using the channels and angles provided by src and irc and conduct a satisfactory trial. , to fabricate the weak sloppy plates of the donali suit fitted on milo from the given ms plate as per the drawing and give a satisfactory trial. , removing the worn out trpf cover fitted on the mill and making and fitting a new cover using the plate given as per the drawing sample and giving a satisfactory trial. , to carry out the work of tipping the teeth of mill rollers and conduct a satisfactory trial. , to carry out the work of chevron cutting as per requirement on mill rollers and give satisfactory trials. , work involving the errectation of broken teeth on the mill s pressure chute repair of worn out teeth via hard facing and conducting a satisfactory trial run , dismantling the old pressure chute errected on the mill completely replacing the corroded section repairing and welding the damaged parts of the ss plate reassembling the unit fitting it onto the mill , fabricate the juice tank for the mill house using the provided 6 8 mm plate and conduct a satisfactory trial run , removing the bottom of the supply juice tank errecting a 12 mm plate in its place and conducting a satisfactory trial. , manufacturing the bed for the s.r.c. and i.r.c. motor gear and conducting a satisfactory trial. , remove the worn out trpf headstock side plate errect a 6mm plate in its place and conduct a satisfactory trial. , fabricating teeth for the hydraulic grab replacing old or damaged teeth with new ones and conducting a satisfactory trial run. , a dismantling old columns beam channels etc. b manufacturing and installing new columns beam channels etc. , removing the old corroded platform and replacing it with a new one. , installing 16 inch 18 inch manholes with blinds , constructing a bed for the pump fitting the pump and motor and conducting a trial run of up to 20 hp. , dismantling fabricating and erecting weak corroded pipe lines up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded tees up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded nipples up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated cross member up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated band up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated flange up to 12 inch and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak sloping reducer up to 12 inch and providing a satisfactory leak proof trial.

CTN :45725139

14 Jul, 2026 6.00 Lacs

Sultanpur - Uttar Pradesh

Tender For tender for cane bagass carriar bagass elivetor ke gale huye side plate ko katkar nikalna tatha 5 bata 6 mm nyi purani plate se banakar lagana , cane carriar cane chapar flore shaft ko cane carriar se bahar nikalna tatha usegadi per load karna va wapas aane per truck se niche utarna , cane carriar ke cutter levelar chapar ke hud ko katkar nikalna va nayi purani plate se hud ko marammat naya banakar lagana , inter carriar ke gale w kamjor size plate ko katkar nikalna w uske sthan per 20mm bata 16mm moti plate e sample ke anushar banaker , bagass elivator ki fail a tede traf sut ko eliment karna , bagass elivetor ke gale va kharab bed va spakit ko dismental karna va uske sthan per motor rewinding giar aadi ki fiting ke liye bed banana , mill rollar kalar ko nirdeshanushar banaker lagana kalar me belding karna , transmission giar ke tute cake bed ko nikalna va nirdeshanushar 16mm plate bata 300mm channel se naya banana , vibhinn sthano per gali hui plate ko katkar nayi purani plate se paich lagane ka karya 3mm se 8mm plate tak , mill ke cane carriar ki pratham drive giar may shaft sahit mill haouse me lejakar fitting karna tatha santoshjanak trail dena , boiler ke air hiter ke top cover naye purani plate se naya banakar lagana walding ewam trail dena , mill house ke teeno juice tray ko aluminium electrod se welding karna ewam santoshjanak trail dena , mill house ke rollar ke side plate drawing anusaar banakar lagana ewam welding karna tatha santoshjanak trail dena , head stock ke niche bagal me juice try upar ms plate lagakar welding karna ewam trail dena , cane carriar ke gale huye ewam tedhe huye channel trn aadi ko katkar nikalna tatha uske sthan per punah marammat karke cane carriar lagana , rollar ke veyering guard ko naya banana , rollar ke juice ko naya ya purjo plate se banakar fit karna , cane bagass carriar bagass elivator ke gale huye ranar ko katkar naya ranar lagana egil lagan welding karna , bagass elivator ke gale va kharab sabhi jali ko bahar nikalna tatha nayi jali lagane ke uprant punah fit karna , mill ke suit hud ki gali hui plate ko katkar nikalna tatha uske sthan per nayi purani plate se banakar lagana , purane gale va kamjor dsm skrin ko katkar dismental karna tatha uske sthan per nayi plate se naya dsm skrin banana va jali lagana , bagass boiler ka fan va uske badi ko naya banakar lgana , mill juice tanki ke gale huye batam kon ko katkar nikalna tatha uske sthan per naya banakar lagana va welding karna , mill house per nayi noch plate banana ewam welding kar fit karne ka karya , boilar ke expectra boiler ke gale hue hisse ko katkar nikalna ms plate se banakar lagana welding karna va trail dena , boilar ke gale hue suit bwmas fitter hud ko katkar nikalna tatha naye va purane plate se marammat krna welding va trail dena , boiler ke ander gale hue air heater damfer suit katkar niche utarna tatha naye purane plate se banakar top per lejakar fitt karna tatha trail dena , tothed rollar 800mm dia nayi 16mm plate se banana va uske naye tooth tip draing sempal anusar banakar welding karne ka karya , boiler ke fd fan dampharo ko kaatkar hatana tatha naya banakar fitting karna wa trial dena , air heater ke damphar ke suit ke marammat ka karya belding karna wa trial dena , roller ke ring ko naya plate banakar fit karna , feed roller ke danto ko kaatkar nikaalna wa naya ya marammat karna

corporations/Associations/Others

CTN :45612044

26 Jun, 2026 NA

Silvassa - Dadra And Nagar Haveli

Tender For auction sale of electrical cable scrap,used air receiver tank,dg kirloskar make 62 kva,used air compressor jl,transformer with oltc class ii,transformer

Central Government/Public Sector

CTN :45593465

22 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot non ferrous scrap - cond & u/s stainless steel scraps such as pipes/ sheets, offcuts, hot boxes, bins,flasks,trough sheets ,rectangular hot water boiler & cylindrical hot water boiler,iv ratchet, rmpu filters,ss canvas, impeller,bfm housing, lhb & sg cd mesh,fresh air housing, ss air duct asssembly, ss dust bins, mugs,underslung water tanks,flex cable short and long, ocb filter assesmbly,needle&syringe destroyer,bed side locker,ss clip assembly,flasks,food store container,reservoir tanks,hot pot,three seaters,dressing drums,ss rope,plates, buckets,cups,forks, rbc cubiclebottle holders, iv coupler housing, clip assembly,food warmer,stainless steel bolts,hand rails,tea cans,water tanks,plates,storage container,rachet handles,filters,canvasses,jars, trays,jugs,kettles,plates, jugs,wall protectors, wash basins , clip assembly stainless steel,storage box,mixie jar, landing door ,vessels,owens,tanks,tumblers, strips, lavatory pan in lay,berth utility wire rods,filters of various types & sorts ,hot case,geysers,sterlisers,leggings,liquid receiver,commode adapter, stainless steel vessels including tea cans,bio toilet ball valves with/ without available attachments and all other stainless steel scrap nature items including magnetic steel items, trough sheets and the above lot is with ferrous attachments,steel/stainless steel pipes/light fittings /filters with/without ferrous fittings /attachments/magnetic steel attachments /adherings, in full/part/broken and in loose parts. note: 1) removal of ferrous/glass/rubber /thread mesh/ wood and other attachments etc are not permitted. 2) cutting is not permitted 3) if any extraneous material/material of aluminium in nature found in the lot, the same should be handed over to the custodian at the time of delivery. pl no 98090719

CTN :45474585

16 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - p.l.no.98050047.scrap c&w fittings consisting of magnet valve upper body (wsf), limiting triple valve head (wsf),triple valve body(wsf),limiting valve housing(wsf),magnet valve housing, stabilizing valve , safety valve, rod cylinder assembly, co2 gas cartridge, plug body & assy. isolating cock & valve, coupling cock, guard valve, relay type dv, drain cock, 1/2"release valve(wsf), receiver socket head, auto drain valve, piston insulator (modified) of tap changer, 2-way air filter, foot operated standing and waste valve, emergency application valve, cast iron dv of sorts and sizes etc.note: segregation is not allowed.qty-35mt.location-ncb-48.

CTN :45463238

22 Jun, 2026 NA

Bazpur - Uttarakhand

Tender For cleaning and painting work of quad, juice heater, juice tank and other

Co-operative

CTN :45415201

10 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For fabrication and erection -replacement of the 2" x 2" square bar rails installed on the cane unloader. removal of the old juice gutter from 'a' mill, fabrication and installation of a new one, and conducting a successful trial run. removal of the old m.s. juice tray from 'a' mill, and fabrication and installation of a new one using m.s. plates. fabrication and installation of a new gear guard in the 'a' mill house. welding of worn-out teeth on the mill pinion as required, followed by grinding to a smooth finish. repair of damaged/worn parts of the tail bar coupling by welding as required, followed by grinding. repair of damaged/worn parts of the tail bar by welding as required, followed by grinding. comprehensive repair of the d.s.m. screen: cutting out and removing corroded sections, fabricating and fitting new replacements, repairing all internal piping, and conducting a successful trial run. thorough cleaning of the cane carrier slats, along with their attached links, pins, rollers, and bushes; followed by greasing and refitting said components into the slats in their proper positions. thorough cleaning of the slats, links, pins, bushes, and rollers of the primary/secondary cane carrier chains; followed by greasing, assembling the chain components, and preparing the chain as per instructions. fabrication and installation of juice rings for the rollers. fabrication and installation of mill bearing guards using 3 mm plates. fabrication and installation of m.s. scrapers for the under-feed rollers. cutting of chevron grooves into old mill rollers as required. cutting of chevron grooves into new mill rollers as required. creating 'dots' on the top and feed rollers of the mill using arc-welding electrodes, as per instructions. [repair/replacement of] m.s. components for the worn-out teeth of the under-feed rollers. cutting out patches from a plate and installing them as new teeth. performing arc welding on the grooves of rollers used in the mills using electrodes, as per instructions. fabricating side juice guards for mill rollers from 3 mm plates, as per instructions. fabricating an under-feed roller for the mill in accordance with the provided drawings. dismantling a damaged or defective juice tank in the mill house; fabricating and installing a new tank in its place, and conducting a trial run. replacing or repairing the damaged sections of a defective juice tank in the mill house. dismantling and replacing the bottom plate of a damaged or defective juice tank in the mill house. cane carrier / bagasse carrier / bagasse elevator / cross bagasse carrier / r.b. c. removal of the cane carrier side plate and installation of a new plate. a. welding or forging the enlarged pin holes in the links of the cane carrier, bagasse carrier, etc., to match the specific pin size. a. removal of broken runners from the cane carrier, inter-carrier, bagasse elevator, return bagasse carrier, or cross bagasse carrier, and installation of new runners in their place. a. removal of old, damaged cane carrier slats and installation of new slats. a. the task of drilling holes in new slats for the cane carrier and inter-carrier. a. straightening and repairing cane carrier slats as required. a. repairing damaged and weakened hoods of the cane chopper, cutter, and fibrizer in accordance with instructions. a. removal of old, damaged cane carrier slats; straightening the damaged slats; cutting out the damaged sections; and repairing them by welding in new or salvaged slat pieces cut to size, thereby restoring the slats to their proper dimensions. a. welding the enlarged holes in the inter-carrier links and re-drilling them to the correct size to match the rivets. a. filling the enlarged holes in old inter-carrier slats by welding, and subsequently re-drilling them to create new holes in accordance with the engineering drawings. a. removal of the damaged band from the inter-carrier clutch shaft, fabricating and installing a new one, and conducting a satisfactory

CTN :45219175

26 May, 2026 NA

Vellore - Tamil Nadu

Tender For dismantling fabrication and erection of imbibition hot water tank and raw juice tank labour contract work

Central Government / Public Sector

CTN :45146143

19 May, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12265ms26b, 98050011, quantity- 41.295 mts. scrap condemned unserviceable ms bed plates, water tanks and water tank cut pieces, ms path plates, foot path plates, sheets, bin cut parts, rack and roller path, air tank cover parts, striker casting wear plates, sliding doors, swing doors, flap doors, ms chequered plates, expansion tank parts, ms plates, plate cuttings, wagon doors, dsl engine long hood, dummy bogie cut parts, cast iron surface plates and base plates, axle counter ms frames, baking oven cut pieces, ocb duct, welding machine outer body, inverter empty body, tap changer ms spares and empty body, manipulator, shaping machine ms body, ms gates, collapsible gates, base plate, short hood cabin cut parts, tables, racks, lavatory chute brackets, ms travelling base, ms danger boards, radiator ms spares, ms die blocks, ms body of radiator fan motor, capacitor ms body, auxiliary transformer ms empty body, ducts, dust bin stand, ht load brake switch body, ms transformer body, ventilator motor frames, transformer top plate, air receiver, storage box cut parts, coach body parts, dust bins, lockers, cattle guard, incinerator chimney parts, incinerator oven, incinerator cut parts, boxes, wagon doors cut pieces, wagon bfr end plates and cut pieces, ms fuel tanks [fire prone], boiler tank cut pieces, angles, girder, sheets cut pieces, pipe bending machine, lathe machine parts, transformer lifting trolley, lifting stands cut pieces, wagon damaged body sheet, floor sheets, pillar type jcb crane dismantled parts, loco lifting tackle assembly cut pieces, portable, jmb duct, stands, channels, fabricated structures, grinding machine body cut pieces cutting crane for utv, and other corroded heavy melting scrap of different thickness of sorts and sizes, with or without attachments. note- 1. gas cutting permitted for the purpose of loading only. 2. it is the responsibility of the purchaser to ensure that fuel tanks to be filled with water and cleaned thoroughly free from flammable substances before cutting to avoid explosion or any casualties. 3. private crane permitted for loading. special note- gas cutting for fuel tank should be done in open area [cutting must be kept clear and free of flammables] and away from bins [free from recognized hazards that are causing or are likely to cause serious harm] and should follow fire-prevention and fire-protection measures. location- [bin no- 265, left side of road no- 2]. hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only. special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery as per mv act 1988

Central Government/Public Sector

CTN :44852429

21 Apr, 2026 NA

Kota - Rajasthan

Tender For corrigendum : auction sale of depot miscellaneous scrap - 98325061 scrap condemn machine consisting of electric power-driven rotary screw type air compressor model e 45-7.5 with air receiver cap.2000 ltr. (elgi) with or without attachmen = 01 nos (in two pcs.) note: - private crane allowed for easy loading perpose.

Juice Tank Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Co-operative

Central Government / Public Sector

Central Government/Public Sector