Latest juice screening system Tenders | Government juice screening system Tenders

Central Government/Public Sector

CTN :40511658

09 Jun, 2025 NA

Mumbai - Maharashtra

Tender For supply of pneumatic cylinder of sliding door for lhb coaches to is 12773:1988 stainless steel to drg. no. skt-2021/18/c alt 1 type b item no 1 to 10 in as sembled condition and bore dia 25 mm. stroke 740 mm. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40511783

26 Jun, 2025 NA

Mumbai - Maharashtra

Tender For (rsp item) supply, installation and commissioning of electro-pneumatic pressuri sed flushing system for 300 lhb non-ac coaches (1200 lavatories) as per rly. board rsp pb it em no. 1267 for year 2022-23.the material shall be supplied as per specification: mmdts 19027 rev. 03 and follow drg. no. mi007851 alt nil for mounting dimensions of control panel of ep pfs for lhb coaches. packing & marking shall be done as per mmdts 19027 rev. 03. warranty shall be applicable as per mmdts 19027 rev.03 i.e. 30 months from the date of supply or 24 months f rom the date of placement in service whichever shall be sooner or as per latest irs conditions. [ warranty period: 30 months after the date of delivery ]

CTN :40500788

11 Jun, 2025 NA

Kharagpur - West Bengal

Tender For supply of pipe clamp c type, as per drawing: lw63111, item 7, (02 nos. per coach) for modification of fiba pneumatic piping arrangement for lhb coaches. [ warranty period: 30 months after the date of deli very ]

CTN :40496845

20 Jun, 2025 NA

Kanchrapara - West Bengal

Tender For supply of isolating cock (1/4" bsp with both end female thread) in pneumatic line designed for pressurised flushing system as per mdts 19027. rev.01 make: spac item code spac.0000641 make: spac or equivalent make functionally compatible in pressurised flushing system of in dian railway coaches fitted with pressurized flushing system of spac make. [ warranty perio d: 30 months after the date of delivery ]

Corporations And Associations And Others

CTN :40259387

05 Jun, 2025 90.00 Lacs

Panchkula - Haryana

Tender For corrigendum : tender for the supply, installation and commissioning pneumatic tourniquet on 2 years rate contract as mentioned against item in schedule of requirement.

CTN :40236100

31 May, 2025 2.50 Crore

Jodhpur - Rajasthan

Tender For corrigendum : e-tender no 03(2025-26) supply of urology consumables item no. 01 - dj stent open tip polyuretheane matarial 4.5, 5.0, 5.5, 6.0 fr x 26 cm dgci approved, dj stent open tip polyuretheane matarial 3.5, 4.0, 4.5, 5.0, 5.5, 6.0 fr x 20 cm dgci approved, dj stent open tip polyuretheane matarial 4.5, 5.0, 5.5, 6.0 fr x 14 cm dgci approved, dj stent intraoperative polyuretheane matarial 4.5, 5.0, 5.5, 6.0 fr x 26 cm dgci approved, dj stent open tip biocompatible polyuretheane matarial 4.5, 5.0, 5.5, 6.0 fr x 26 cm dgci approved, dj stent open tip biocompatible polyuretheane matarial 3, 3.5, 4.0, 4.5 fr x 14 cm cm dgci approved, dj stent open tip biocompatible polyuretheane matarial 3, 3.5, 4.0, 4.5, 5.0 fr x 16 cm cm dgci approved, dj stent open tip biocompatible polyuretheane matarial 3, 3.5, 4.0, 4.5, 5.0 fr x 20 cm cm dgci approved, dj stent intraoperative biocompatible polyuretheane matarial 4.5, 5.0, 5.5, 6.0 x 26 cm dgci approved, dj stent open tip silicone matarial 4.5, 5.0, 5.5, 6.0 fr x 26 cm dgci approved, dj stent open tip silicone matarial 4.5, 5.0, 5.5, 6.0 fr x 20 cm dgci approved, endopyelotomy stent 4x8, 5x10, 6x12, 7x16 fr dgci approved, dj stent remover forceps 6 fr flexible dgci approved, suprapubic puncture and drainage set dgci approved 14 fr, 16 fr, suprapubic metal tip puncture and drainage set dgci approved, percutaneous nephrostomy drainage set pigtail dgci approved 12, 14 fr, percutaneous nephrostomy drainage set melcot dgci approved 12, 14 fr, percutaneous nephrostomy drainage catheter pigtail dgci approved 12, 14 fr, percutaneous nephrostomy drainage catheter malecot dgci approved 12, 14 fr, ureteral balloon dialator dgci approved balloon length 4 , 10, transuretroscopic balloon dialator dgci approved, nephrostomy track balloon dilator dgci approved, uretral dilator set 6 fr to 16 fr dgci approved, fascial dilator 6 fr to 16 fr dgci approved, nottingham 1 step dilator dgci approved, renal dilator 18 to 30 fr dgci approved, amplatz renal sheath 12, 14, 16, 18, 20, 22, 24, 26, 28, 30 dgci approved, amplatz sheath with renal dilator dgci approved 14 fr to 30 fr, introducer sheath dgci approved, meatal dilator adult with hole dgci approved, meatal dilator pead. with hole dgci approved, introducer catheter dgci approved, uretheral access sheath dgci approved all sizes, uretheral access sheath dual luman dgci approved all sizes, uretric catheter 4, 5, 6, fr 70 cm open end dgci approved, uretric catheter 4, 5, 6, fr 75 cm open end dgci approved, uretric catheter 4, 5, 6, fr 70 cm open end tip dgci approved, stone basket nitinol flat wire dgci approved all sizes, stone basket nitinol helical wire dgci approved all sizes, stone basket nitinol without tip dgci approved all sizes, stone retriever dgci approved, grasping forcep 3 prong dgci approved all sizes, initial puncture needle 3 part beval tip dgci approved all sizes, initial puncture needle 2 part trocar tip dgci approved all sizes, initial puncture needle 2 part beval tip dgci approved all sizes, bladder evacuator dgci approved, bladder evacuator glass dgci approved, asepto bulb irrigation syringe dgci approved, toomey syringe dgci approved, incontinence sling mesh dgci approved, incontinence applier dgci approved, incontenence clamp male all sizes dgci approved, track path finder, cold cup biopsy forceps all sizes, sachse cold cutting knife double stem, guide rod 6 fr, stone punch forceps, high frequency code for turp, ot knife, delta forceps 10 fr pcnl, pcnl tri pronge forceps 9 & 11 fr, sheath fans for rirs 12 7 14 fr, lazer fibers 200 micron, lazer fibers 365 micron, lazer fibers 550 micron, lazer fibers 150 micron, urs alligator forcep 3 fr 1 mm, urs alligator forcep 4 fr 1.2 mm, urs bipronge forcep 3 fr 1 mm, urs bipronge forcep 4 fr 1.2 mm, pcnl alligator forcep 9 fr 3 mm, pcnl alligator forcep 11 fr 3.5 mm, miniperc alligator forcep 3 fr, pcnl pneumatic probe 9 fr 3 mm, pcnl pneumatic probe 11 fr 3.5 mm, miniperc pneumatic probe 0.8

Central Government/Public Sector

CTN :40446781

13 Jun, 2025 NA

Angul - Odisha

Tender For tender for supply of pneumatic dc valves - as per attached tender specification of item 1 in nit checklist , as per attached tender specification of item 2 in nit checklist , as per attached tender specification of item 3 in nit checklist , as per attached tender specification of item 4 in nit checklist , as per attached tender specification of item 5 in nit checklist , as per attached tender specification of item 6 in nit checklist

State Government

CTN :40390447

02 Jun, 2025 8.88 Lacs

Multi City - Karnataka

Tender For procurement of tools - extension bar 1/2inch, sludge hammer 14lb, allen key set 3 mm to 28 mm, portable hand drilling machine, jigsaw blade t121af, jigsaw blade t118b, bosch cutting machine, magnetic drilling machine, heavy duty grinding machine, screw driver 824, hand vice groz hv/125, des sledge hammer 8 lbs, bench drilling m/c, item name grinding machine 4 inch, jigsaw machine, long neck strt grinding m/c, angle grinder 100mm size, adjustable wrench set, heavy duty bench vice 300mm, spec bearing puller(5tonne,3leg), spec bearing puller 14 inch, spec bearing puller(2tonne,3leg), item name 3 jaws bearing puller set, sq drive 19mm hex adaptor 1 inch, spec sq drive 14mm hex adaptor 1 inch , spec circlip plier (int & ext), spec circlip plier extrnal 9 inch bent jaw, spec circlip plier internal 9 inch st jaw., blower , industrial, flaring tool, flaring tools id 37.5mm, sledge hammer 16lbs, ratchets 1 inch, ratchets 3/4 inch, revers. ratchet 19mm sq drive, bi hexagon box spanner set, spec slugging ring spanner 75mm, spec slugging ring spanner 41 mm, spec slugging ring spanner 30 mm, spec slogging offset spanner 75 mm, spec slogging ring spanner 55 mm, spec slugging ring spanner 46 mm, spec slugging ring spanner 36 mm, spec slugging ring spanner 70 mm, spec slugging ring spanner 60 mm, spec slugging ring spanner 50 mm, spec slogging ring spanner 65 mm, tubular spanner 6mm to 32mm, ratchet(reversible) size 1/2 inch, exel hexagonal socket set, spec slugging open end spanner 34mm, spec slugging open end spanner 32mm, spec slugging open end spanner100mm, spec slugging open end spanner30 mm, open end slugging spanner 95mm, spec slugging open end spanner 90 mm, single ended spanner 55mm, spec slugging open end spanner 77mm, spec single end d spanner 65mm, spec slugging open end spanner 58mm, spec slugging open end spanner46 mm, spec slugging open end spanner 36mm, open end slugging spanner 85mm, spec single end spanner 80 mm, spec slugging open end spanner 70mm, spec slugging open end spanner 60mm, spec slugging open end spanner 67mm, spec slugging open end spanner 50mm, cutting pliers (taparia), item name pneumatic impact wrench, bi hexagonal socket set, torque wrench 7 kg m to 35 kg m, torque wrench 5 kg m to 23 kg m, heavy duty hexagonal sockets, chain wrench heavy duty 36 inch, pipe wrench 30 inch, adaptor (3/4 inch 1/2 inch ), half round files (smooth) 12 inch , triangular files smooth 12inch, triangular files rough 12inch len, round files (rough) 12inch len, half round files rough 12 inch, flat files (smooth) 1inch x 12 inch, flat files (rough) 1inchx12inch, long feeler gauge 12 inch, feeler guage set 0. 05 to 1 mm, pitch gauge 1/64 inch to 3/8 inch, pitch gauge 0 .25 to 10 mm, engineers square 300 mm, engineers square 150mm, spirit level 1000mm length, dial gauge 0(point)01 to 5mm, lever type dial gauge, dial gauge with magnetic stand, item name steel rule 600mm, radius gauge, vernier caliper 0 to 280mm, outside micrometer 300mm to 400mm, spec hss cobalt grade m33 tap set, spec hss cobalt grade m30 tap set, spec hss cobalt grade m27 tap set, spec hss cobalt grade m24 tap set, spec hss cobalt grade m22 tap set, spec hss cobalt grade m6 tap set, spec hss tap set m18, spec hss tap set m16, spec hss tap set m14, spec hss tap set m12, spec hss tap set m10, spec hss tap set m8, spec hss tap set m5, des hss tap set m4, adjustable tap handle, outside calipers, inside spring calipers 600mm, extension bar 1763, pipe wrench 24 inch, extension rod 3/4 inch, spe hssdrill bit set

CTN :40437644

29 Jul, 2025 NA

Delhi - Delhi

Tender For procurement of spares for il-78 aircraft - flow meter 510, needle valve 502, pressure relief valve 504, filter element 5 absolute, air pressure regulator 527, pressure reducer valve 503, air pressure gauge 531, pressure gauge 517, pressure gauge 516, pressure gauge 539, pressure gauge 532, pressure gauge 537, pneumatic control valve, auto/manual switch, pneumatic controller, fuel disconnect, filter, module, o-ring, relay, diode, face-seal mating, relay, iso chain, l=61.25 (102 pitches), washer, shoulder ring, screw cap, setscrew (opt to item 90), bushing teflon, seal and retainer s/a, retainer-seal and bearing, washer thrust, seal, plain encased, washer (order nha item 6), rail, washer, flat, screw, screw, cap, socket head, .1380-32 thd x .750 lg, housing assembly, tensioning screw, bracket, chain wheel, axle, washer, name plate, subassy, switch (s3) attaching parts, box assembly, connector circ. mount, switch subassy (s4) attaching parts, cylinder, piston, end cap, oil, end cap, air, end cup, nameplate, block assembly, body (part of item 16.1), spool and sleeve assembly, sleeve, spool and sleeve assembly, spool, gear, worm attaching parts, plug, pin, cover attaching parts, sleeve, plate, cover attaching part, needle, valve, assembly, plate, cover attaching parts, it is a sub-assembly of hydra ulic flow regulator, label, cap-port s/a, plate cam, name plate, name plate, sleeve, cover, body, shaft, splined, body, assembly, cam and piston s/a, piston and shoe s/a, bearing barrel, barrel-cylinder, mounting flange s/a, pin-cam index, front housing s/a, shaft and bearing s/a, collar-hold down, shaft- internal drive, bushing- spline, spring-helical compression, plate- hold down, spacer, bushing, cup (order nha item-6), actuator assy, shaft assy, switch assy (s2) attaching parts, body, motor, machined, cam, cam, shaft, plug, cover, motor attaching parts, hex attaching parts, cover, cover attaching parts, cover attaching parts, tube, shaft, splined, plate, switch, stand off attaching parts, spacer, stand off, gasket, terminal (96736 scd 99-1008-3), terminal (96736 scd 99-1008-2), box assy, box assembly, worm, machined, module, connector attaching parts, receptacle, it is a sub-assembly of light control box, switch, micro, relay,2 pdt,type i attaching parts, pin, straight, 0937 dia attaching parts, relay, screw-socket head cap (ap), washer, wave (96736 scd 99-1011-2), spool and piston subassembly, spool; compensator(matched set order nha item-290), piston, stroking, piston, rate, barrel cylinder, piston, blocking 9matched set order nha), port cap, bearing, cylinder barrel, elbow, flange- mounting, packing, perfor med