Latest jumper cable Tenders | Government jumper cable Tenders

Central Government/Public Sector

CTN :45226983

08 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of high voltage inter car jumper cable, 95 sq mm (hvjl), part no c7-095-151, drg no . c-2324852, make m/s te connectivity or equivalent suitable for vande bharat [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45241183

15 Jun, 2026 NA

Dahod - Gujarat

Tender For supply of solid mig/mag copper coated, class - i welding filler wire, dia.: 1.2mm, net weight per spool: 12.5 kgs. (max.) confirming to irs: m-46/2020 & the requirements not covered under this specification should be as per grade: s3c503 of is: 6419-1996 with amd. 2: 2025. [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45235182

26 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of others - scrap released industrial waste products unserviceable for railway use 1 coal /coke ashes debris steam coal and hard coke dust scrap pieces of u/s fire bricks 2 broken piece of plain and color glass mirror porcelain washbasin commode crockery item etc.3 u/s cotton rag canvas released from coaches old unusable hand gloves aprons etc 4 u/s rubber items window sealing rubber foam pieces gas rubber hose pipes shutter felts damaged & condemned rubber hose and pvc pipe pieces damaged torn vacuum hose pipes without universal couplings small broken pieces of rubber released from roof of the coaches & glass wool 5 unusable timber plywood wooden scrap pieces of compreg ply broken slates pieces of berth shutter panel etc scrap broken pieces of released packing wood timber jolly board condemned wooden seats without rexene & ferrous fittings wood shavings mixed with sand & rubbish 6 released packing material rubber fibre wooden polythene bags gunny bags card board paper puttah gatta thermocole etc. broken and u/s pieces of asbestos cement sheets released from shops 7 unserviceable old lp sheet including pop rivet seat berth number plate unuseable off cuts of new lp sheet unusable pieces of limpet /nftc sheet 8 floor sweeping consisting of sand mud mud muck scrap paper shrubs tree branches including dried grass & leaves coach-rust rusty nails screws and washers u/s aluminum rivets mixed with sweepings and ashes from burn material mud and muck includes unserviceable pieces of stones boulders broken concrete foundations and u/s pieces of other bricks oily greasy rags oily dirt and mud mixed with rubbish heaps excluding sludge oil 9 unserviceable off-cuts of fresh rexene pvc sheet coir recron foam released and unserviceable rexene pvc sheet coir recron foam 10 unserviceable frp products like window shutters louvers inlay lavatory wall protectors wash basin fish tails banjo shutter front cover or axle box mouldings 11 u/s nylon plastic bushes nylon wire rope and other nylon items broken welding hand screen helmet face shield 12 u/s bakelite bakelite box with screws broken and condermned bakelite cover of tumber switch and fuse without non-ferrous fitting mcb with embedded material except aluminum and copper, ceramic pieces plastic pvc sheet and sleeves broken pieces of electric switches battery floats flexible pipes unserviceable broken tube lights and bulbs fuse without non-ferrous fittings broken damaged pieces of insulating material 13 engineering garbage not required by iow and generated inside workshop like tree branches loose earth etc 14 following unserviceable items released from poh activities -bp and fp houses with end ferrous parts, unserviceable buffer pads and draft pads, frp main door embedded with ferrous window bars handle latch etc frp window shutters with embedded ferrous material, unserviceable lavatory door vestibule door fiied with latch/handle and ferrous mouldings etc, hdpe commode chute with ferrous bracket and supporting ring,plastic spool with end pieces of filler wire. 15 ferrous pieces mixed with rubbish weighing not more than 500gms 16 any item of industrial waste not covered above as advised in writing by the site engineer in charge. as is where is basis. loading by purchase. location of material : site c i.e. 100 kld etp plant/lower parel workshop/ maharashtra. custodian :sse/ys/pl(total approximate weight 50 mt.) note 1)the above items are expected generation of various items in the workshop. the railway does not guarantee availability of all types of industrial waste at all times in the same proportion some item may be even zero 2)the railway will not accept any claim for availability of any specific items or their quantities 3)no material other than above shall be permitted to be lifted 4)mode of delivery will be in metric tonne. no sorting & pick and choose of material will be allowed.

corporations/Associations/Others

CTN :45222645

04 Jun, 2026 NA

Hyderabad - Telangana

Tender For auction sale of crimped connecting wire,b connector wiring,actuators assy,nozzel reataing nut,over flow valve,bush,tube cpr water out let,control spool - fie,tube cpr water inlet,polyamide btake pipe repairkit,oil seal rear hub outer,gas kit,fixing srew for alternator,head light assy r h - jnnurm tata /lf / a,head light assy r h with p 45t holder,assy head lamp l h lumax lf,zfgb , selector housing,gb2 clutch withdrawl sleeve cl -3 f,a c pistion ring r/ kit tata / slf,voss connector kit for fuel line,belt - v - ribbed alternator - tml / lf / a c,belt - engine crank to idler bx 60- tata,v belt cogged 1280 lnth for fan tata,belt - double baneed 2 bx38 tata / lf,belt- double baneed 2 bx600000 tata,support plate - fie,regulator assy alternator,rotor assy - tvs alternator,gb 2 thrust washer on shaft,oil seal hub - inner - re - doublelip tata,front- br , liner - aal,std w/ rivits tata,assy cable acclerator lf non a c,fc kit tata lf ac/nac,fuel filter -it - 18000 kms -tml / lf - a,air filter primary -72000 kms -tml/lf/a,air filter 2nd -216000 kms -tml/lf - a c,lube oil filter - spinon tata mini,air filter eliment -outer -tata mini,safety cartridge -a/fiter inner tata,rectangular oil seal tata /slf/ lf / a

Central Government And Public Sector

CTN :45153028

29 May, 2026 NA

Nagpur - Maharashtra

Tender For supply of jumper cable support link assembly (stainless steel) to drawing no. lwscwac / eog-7-1-006 / col i, alt.b and with bracket as per icf drawing no. aab15007. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45209801

04 Jun, 2026 NA

Liluah - West Bengal

Tender For supply of high voltage cable jumper for hs-spart including hv cable for connection, isolation & protectionsystem (electrical and mechanical) for feeding adjacent units including high voltage insulator, intercar jumper cable assembly along with crimping lugs, all mounting & earthing hardware, mountingbrackets and exterior cable protection above the roof area as per clause 4.27 of rdso specificationno. rdso/pe/spec/emu/0196-2019 (rev.0). (one set per rake). [ warranty period: 30 months after the date of delivery ] ]

CTN :45241751

03 Jun, 2026 NA

Kharagpur - West Bengal

Tender For supply of jumper cable support link assembly (stainless steel ) as per icf drg. no.lwscwac/eog-7-1-006/col 1, alt-nil and with proper bracket (as per icf drg no. aab15007) [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

CTN :45212304

29 May, 2026 NA

Kalyani - West Bengal

Tender For supply of wire spool htas-iii, 1.2 mm, aws code: saf 5.20 e71t- 1c, to be supplied phase wise 300 kg per month

CTN :45227430

12 Jun, 2026 NA

Bareli - Madhya Pradesh

Tender For supply of copper coated co2 welding filler solid wire size 1.2 mm, as per spec. no. irs: m-46/2020 class-1, spool size & condition of wire as per is:6419-96 (reaffirmed 2021) with additional requirement of precision lair winding (plw) & copper content of coating to be between 0.2 to 0.5%,weld test as per aws (sfa-5.18) section-ii part-c, cast-305 mm min. & helix 25 mm max. in spool of dia-300 mm & weight: 12.5 kgs, shelf life of material not to be less than one year from the date of manufacturing. quality plan - n.a [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45210258

05 Jun, 2026 NA

Liluah - West Bengal

Tender For supply of jumper cable support link assembly (stainless steel) to drg no. -lwscwac/eog-7-1-006/col 1,alt-nil and with proper bracket (as per icf drg no. abb15007) [ warranty period: 30 months after the date of delivery ] ]

Jumper Cable Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government And Public Sector