Get complete information related to latest Jumper Clamp Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Jumper Clamp Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Jumper Clamp Tenders.
Tender For supply of carbide pad 6 pad , clamping cylinder seal , lifting cylinder seal kit , bend tension cylinder seal kit , clamping cylinder second vice , bundling cylinder seal kit , material indexing cylinder , gear box shaft
Tender For supply of retro reflective type aluminium 2 digit signal number plate (size 230mm x 153mm x 2mm) with clamping material. copy of drg. attached. details of required number plates for signal will be provided by consignee after issuing po. approval of material sample should be taken from consignee before bulk supply. material should supply at consignee depot sse/s/m/jbp . this item is not available in gem . [ w arranty period: 30 months after the date of delivery ]
Tender For supply of retro reflective type aluminum 2 and 3 digit shunt signal plate with clamping mate rial. details as per drawing attached. approval of sample material should be taken from consignee before b ulk supply. [ warranty period: 30 months after the date of delivery ]
Tender For corrigendum : supply of compression set apparatus for testing under constant strain (quick clamping type). technical specification details: (1) material of compression plates, spec-should be stainless steel, (2) dimention requi red (min) spec-45 mm x 10 mm x 130 mm, (3) no. of specimen tested at a time, spec- 03 nos. (min.), (4) operating temperature range, spec- 0 degree celsius to 120 degree celsius, (5) spacer, spec- 06 sets of s pacers, (6) operational ambience required, spec- open air, oven & hot water & is : 3400 (pt-10)/1977, mak e: prolific or elastocon or uniframe or pec or equivalent. [ warranty period: 30 months after the dat e of delivery ]
Tender For intergrated wtcc with end assly for lhb non ac coaches., as per drawing: lg 10180 except item no. 1 alt. 'k', packing instruction: 1. the supplier shall pack the integrate d wtcc in a suitably designed returnable fixture in such a way that integrated wtcc s hall not get scratched, damaged, twisted during transportation, storage and lifting and to avoid scratches on outer surface. it should be wrapped with enviroment friend ly material and it should have standard clamping /fastening mechanism so that it can b e opened easily. it should have firm's identification mark. 2. first returanable fixture al ong with integrated wtcc be retained by rcf & this fixture shall be exchanged in the se cond lot supply and so on. at the end of the contact, the firm shall collect the remain ing returnable packing fixture from rcf. 3. the packing fixture/frame to be fabricated having sufficient strenght to bear approximate 1 tonne load in static & moving conditi on of two coach set of integrated wtcc. 4. the fixture /frame/pallet should be designe d so that the packed wtcc remain preferably in horizontal position to minimize surface area. 5. it should also be suitable for storage of integrated wtcc under open sky. [ wa rranty period: 30 months after the date of delivery ]
Tender For supply & installation of aerosol based fire detection & suppression system cartridge 100gm each (total 6 pie ces per unit coach ) , technical requirement in annexure-g1 of rdso specification no. rdso/pe/spec/ac/0192-2018(rev-1) & rdso le tter no. el/7.1.108/mssbc dated 17.09.21. these shall be installed in conventional memu motor coach at memu/sre or other shed. all necessary modification, clamping arrangement & accessories required for installation of this item shall be with the scope of this suppli er. note: location of installation of aerosol based fire detection and suppression system cartridge in conventional memu motor shall b e as per drawing mentioned in the rdso letter no. el/0.3.1 dated 19.09.2023 .material shall be procured from rdso approved source . [ warranty period: 120 months after the date of delivery ]
Tender For supply of dismantling and shifting of high tension line at proposed land of esi hospital duburi c c - 150x150mm rs joist 11 mtr long 30.6kg per meter each 336.6 kg , 11kv v cross arm , 11kv f clamp , back clamp for v cross arm , 11kv pin insulator polymer , 6 hw fitting term and condition 45kn , disc insulator term and cindition c 45 kn polymer , ht stay set complete , ht stay insulator , ht stay clamp 1.95kg per pair , 7 or 10 swg stay wire 10kg per stay , 11kv icore, 100sqmm xlpe insulated aaa conductor unarmoured , 100x50x6 mm g 1 channel each 2.8 mtr. long 9.2kg per mtrx 2 no. , 75x40x6 mm gi channel each 2.8 mtr. long 6.8kg per mtrwith side angle , 50x50x6 mm gi angle each 2.8 mtr. long 4.5kg per mtr with side angle , pg clamp for 100 mm2 aaa conductor , gi nuts and bolts of assorted size , earthing support coil type , danger plate , anti climbing device made of gi barbed wire, clamping arrangement etc. 2kg per support , sundries survey, tree cutting, insulation tape, small size nut bolt, clamp, binding wire, sockets , concreting work of 11 mtr gi pole , material cost for concreting of stay wire , dismantling of rs joint of 11 mtr long , dismantling of pole of 8 mtr long psc pole , dismantling of aaac conductor
Tender For supplying and fixing of sewerage system eco tech device, removable basket type composite solids retention grating of composite material made from carbon fiber-glass fiber 3d woven billet fabric along with glass fiber woven fabric layers and the flow mat (corrosion and fire resistant material) with suitable clamping arrangement to drainage system manhole opening in chala & sulpad area for vapi municipal corporation.
Tender For set of carline for lhb gs amrit bharat coach. note:-(1)firm shall collect al l latest/final drawings before manufacturing. there may be minor modification in desig n. (2)special condition as per annexure-abc dy cple-iii letter no. rcf/hsq/plg/mpsh/510003 dated 27/05/2024., as per drawing: mp24clwwgs version 1, packing instruction: carline assly t he supplier shall pack the three c/set (segments) of carlines in a suitably designed rob ust returnable metallic cage/structure in such a way that carlines shall not get enta ngle, damaged, twisted, dented during transportation, storage, handling and lifting a nd to avoid scratches on outer surface suitable environment friendly cushioning mat erial is to be placed between two segments, transit damage if any shall be at the cost of supplier. the packing cage/structure to be fabricated by using sq. tubes channels/a ngles having sufficient strength to bear approximate 1.5 tonne material load in static & moving condition of three coach set of carline. the bottom part of this packing cage /pallet should be such that curvature profile of bottom carline should match with th e profile of packing cage and it can accommodate fork lifter arms for lifting and tran sportation. it should have standard clamping/fastening mechanism to facilitate easy u npacking & unloading. it should have firm's identification/color mark. the packing cage s along with set of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm s hall collect the remaining returnable packing cages from rcf. it should also be suitab le for storage of carline under open sky. packing slip should be pasted on each cage s howing p.o. no., pl no., description,drg. no./spec, , qty. , firm's name and address & desp atch date etc. for identification. [ warranty period: 30 months after the date of delivery ]
Tender For end wall assembly note:-in drawings " mig welding (131) is read as tig weldi ng (141) " as per design letter no. md46231 dated 16.03.2024 , as per drawing: lp15112 alt. ' h' & mdts21332 rev-00 dated 09.06.2020 ,fitted alongwith shutter complete to drg.no. 2 10113.0.76.300.012 alt'-r1', packing instruction: 1. the supplier shall pack the end wall in a s uitably designed returnable fixture in such a way that end wall shall not get scratch ed, damaged, twisted during transportation, storage and lifting and to avoid scratch es on outer surface. it should be wrapped with enviroment friendly material and it sho uld have standard clamping /fastening mechanism so that it can be opened easily. it sh ould have firm's identification mark. 2. first returanable fixture along with end wall b e retained by rcf & this fixture shall be exchanged in the second lot supply and so on. at the end of the contact, the firm shall collect the remaining returnable packing fixt ure from rcf. 3. the packing fixture/frame to be fabricated having sufficient strenght to bear approximate 2 tonne load in static & moving condition of two coach sets of en d wall. 4. the fixture /frame/pallet should be designed so that the packed end wall pre ferably remain in vertical position to minimize surface area. 5. it should also be suitabl e for storage of end wallunder open sky. [ warranty period: 30 months after the date of deli very ]