Latest karabiner Tenders | Government karabiner Tenders

CTN :41233932

12 Aug, 2025 9.25 Lacs

Bardhaman - West Bengal

Tender For supply of dome valve spares d d - daetp:bronze bush set for dome shaft: part no:-: drg no:-nspcl/pp-2/o<(>&<)>m/ahs/1/part-1 <(>&<)> 2. product no: bronze bush , daetp:shaft set for 200 nb dome valve: part no:-: drg no:-nspcl/bmd/daetp/012 product no: shaft set for 200nb dome valve , daetp:discharge valve top adaptor: part no:-: drg no: 1. , nspcl/bmd/daetp/016 part-1 2. for inner side of top adaptor refer to to plate drawing. product no: discharge valve top adaptor , daetp: discharge valve bottom adaptor: part no:-: drg no:-nspcl/bmd/daetp/016-part-3 product no: discharge valve bottom adaptor , 200nb:cast iron dome for dome valve : part no:-: drg no:- nspcl/bmd /dome element/ci , 200 nb dome valve complete assembly: part no:-: drg no:-nspcl/bmd/daetp/015 , 200 nb discharge valve complete assembly: part no:-: drg no:-nspcl/bmd/daetp/016

State Government

CTN :41234048

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of c/f pump (clear water) and its accessories at saraswatipur rwss - supplying ,installation and commissioning of multi stage/ horizontal split casing/multi stage centrifugal pump (make: kirloskar / wpil/jyoti/ mather & platt) rating-15 kw/20hp as per is:5120, capable for discharging 72 m3/hr against a head of 40 m , consisting of bronze impellers, stainless steel pump shaft, etc. with all accessories coupled with energy efficient (ie3) tefc squirrel cage induction motor confirming to is:325 and is:12615, having 15% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar /abb/cgl/bhel] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, foot valve, pressure gauge, nuts & bolts, packings, fitting & fixing, labour & technician, etc. all complete job as per site requirement and direction of e/i. discharging -72 m3/hr and head - 40m (1w + 1s) 20 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 20 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job., cost towards making suitable suction line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion, including making hole for suction, cutting, welding etc all complete., cost towards making suitable delivery line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion including joining the new suction line to the existing header by means of cutting, welding etc all complete., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 100 a copper busbar- 4 pole, 1 no. 100 a mccb as incoming feeder and 2 nos. 63a mccb as outgoing feeders for motors, 1 no. 63 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i .), supplying and erecting 16 sqmm 3 core xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors), providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismanteling of old pump set and foundation and making arrangements for removal of debries from the pump house., construction of chamber for 100mm sluices valve.

State Government

CTN :41234051

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of vt pump (raw water) and its accessories at saraswatipur rwss - supplying , installation and commissioning of single/multi stage vertical turbine pump sets (make: kirloskar /wpil/ mather & platt), rating-22kw/30hp approx as per is 1710, capable of discharging 94.56 m3/hr against a head of 50 m, consisting of bowl assemblies, bronze impellers, column assembly, stainless steel pump shaft, line shaft, etc. with all accessories coupled with squirrel cage induction motor confirming to is:325 and is:12615, having 20% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar, jyoti, abb, cgl, bhel, jsl] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, pressure gauge, etc. all complete job as per site requirement and direction of e/i. discharging -94.56 m3/hr and head - 50m (1w + 1s) 30 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 30 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job for raw water vt pump set., cost towards jointing newly installed pump motor set to the existing header at raw water p/p., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 160 a copper busbar- 4 pole, 1 no. 160 a mccb as incoming feeder and 2 nos. 100a mccb as outgoing feeders for motors, 1 no. 100 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i ., supplying and erecting 16 sqmm 3 core xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors)., providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismantling of old pump set and foundation and making arrangements for removal of debries from the pump house.

State Government

CTN :41234052

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of items of vt pump (raw water) and accessories at gumuria rwss - supplying , installation and commissioning of single/multi stage vertical turbine pump sets (make: kirloskar /wpil/ mather & platt), rating-7.5 hp approx as per is 1710, capable of discharging 24.5 m3/hr against a head of 30 m, consisting of bowl assemblies, bronze impellers, column assembly, stainless steel pump shaft, line shaft, etc. with all accessories coupled with squirrel cage induction motor confirming to is:325 and is:12615, having 20% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar, jyoti, abb, cgl, bhel, jsl] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, foot valve, reducer, pressure gauge, etc. all complete job as per site requirement and direction of e/i. discharging -24.5 m3/hr and head - 30m (1w + 1s) 7.5 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 7.5 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job., cost towards jointing newly installed pump motor set to the existing header., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 100 a copper busbar- 4 pole, 1 no. 100 a mccb as incoming feeder and 2 nos. 63 a mccb as outgoing feeders for motors, 1 no. 63 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, phase indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i .), supplying and erecting 6 sqmm xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors)., providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismanteling of old pump set and foundation and making arrangements for removal of debries from the pump house.

State Government

CTN :41234055

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of items of c/f pump(clear water) and its accessories at gumuria rwss - supplying ,installation and commissioning of multi stage/ horizontal split casing/multi stage centrifugal pump (make: kirloskar / wpil/jyoti/ mather & platt) rating-40hp as per is:5120, capable for discharging 30 m3/hr against a head of 101 m , consisting of bronze impellers, stainless steel pump shaft, etc. with all accessories coupled with energy efficient (ie3) tefc squirrel cage induction motor confirming to is:325 and is:12615, having 15% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar /abb/cgl/bhel] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, foot valve, pressure gauge, ms delivery & suction pipe, common header, nuts & bolts, packings, fitting & fixing, labour & technician, etc. all complete job as per site requirement and direction of e/i. discharging -30 m3/hr and head - 101 m (1w + 1s) 40 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 40 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job., cost towards making suitable suction line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion, including making hole for suction, cutting, welding etc all complete., cost towards making suitable delivery line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion including joining the new suction line to the existing header by means of cutting, welding etc all complete., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 200 a copper busbar- 4 pole, 1 no. 160 a mccb as incoming feeder and 2 nos. 100 a mccb as outgoing feeders for motors, 1 no. 100 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i ., supplying and erecting 25 sqmm xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors)., providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismanteling of old pump set and foundation and making arrangements for removal of debries from the pump house.

CTN :41030874

16 Aug, 2025 5.79 Crore

Karwar - Karnataka

Tender For corrigendum : procurement of fcbt and td auxiliary spares - bushing, countersunk screw m-8, rear thrust pad, gasket paronite (p)oh-(b)t s 1.0 gost 481-80, insert, shaft, impeller, ring, coupling, condensate pump, lock washer, oil retaining ring, turbine rotor assembly, two-half ring, gear shaft, flange, oil retaining ring, coupling, feed pump, jacket, nut, lock washer, intermediate bushing, spinner, nut m64 x 3, jacket, throttle valve, ring, ring, insert, reduction gear case, bolt - m10- 6g x 50, bolt - m10- 6g x 50, bolt - ml2-6g x 30, bolt - ml2-6g x 45, guide blade assembly, hex head nut m-12-6h, hex head nut m-14-6h, hex head nut m-16-6h, nozzle, plug, pocket, semi ring, screw, stud ml2- 6g x 25, stud m12- 6g x 30, stud m14 -6g x 30, stud m16-6g x 40, stud m12- 6g, nut, ring, rod, rod, safety valve, hand oil pump, male threaded-end straightway, bronze threaded-end angle stop valve, hand pump filter, oil indicator, rotor assembly, thrust disk, gland case in two halves, four segment sealing ring, reduction gear rotor assembly, reduction gear rotor, gear, roller, coupling, lock ring, coupling roller, nut m24x1.5-6h 05 06, gear wheel, key, setting ring, ring of two half, spherical washer, cover, gasket, slide valve, special nut, axle box, stud ?8-6g?22 56 029, ring 8?12, cap, gasket, flange, bushing, drive gear, bushing, bushing, bushing, bushing, spring coupling, pin 4?15, bracket, through woven stuffing, key 5?5?30, drive gear, bushing, pin 2?14, gasket, gasket, screw-in union, pin, plug, screw ?6-6g?10 14? 029, lever, jacket, slide valve, bellows, piston, spring, slide valve, speed regulator spring, tension screw, bushing, yoke, ring 2-43.8-4.1, spring, lower bushing of driven screw, lower bushing of driving screw, thrust plate (end thrust bearing), pump half-coupling, flat spring, gasket sail cloth no.1(p)b code no.11102 grade 1,100 cm wid, gasket rubber (i)p(p)-2025 s 2.0, sheild in two half, support pad, guide blades & steam shield, bushing, floating ring of two halves, support pad, sheild, support plate, support plate, thrust pad, valve seat, ball d84, lock washer a.6.08?18?10?, lock washer a.8.08?18?10?, ball link, spherical end thrust bearing in two half, spring, spring, bellow, magnet ball bearing 6010, gasket cardboard ? s 0.3 gost 9347-74, gasket polytetrafluoroethyl ene plate, grade 1 s 2.0, lock washer 10.08?18?10?, lock washer 16.08?18?10?, bolt m10, axle, ball link, end-thrust bearing, bushing, axle, bushing 12x10, shackle, bushing 10x10, cap nut, cross-piece, valve, gasket paronite (p)oh-(b)t s 1.0 gost 481-80, gasket paronite (p)oh-(b)t s 1.0 gost 481-80, lock washer 16.08x18x10t, stud m24, stop valve assembly, stem, valve seat, valve, bellows as an assembly, tail piece, coupling of 2 halves, spring, gasket d 189?153?4, key, key, gasket cardboard ? s 0.3 gost 9347-74, gasket cardboard ? s 0.3 gost 9346-74, gasket paronite a-1 s 1.0 gost 481-80, gasket paronite b-1 s 1.0 gost 481-80, gasket paronite c-1 s 1.0 gost 481-80, lock washer 12. 08?18?10?, lock washer 20. 8?18?10?, lock washer 8. 08?18?10?, spring washer 5 65? 029, spring washer 6 65? 029, stop angle valve dn10 pn 6.4 mpa, lock nut, bolt m12, bolt m10, stud m16, stud m16, stud m20, serrated metal washer, nut m12, nut m10, nut m16, nut m20, special nut, nozzle segment, seal ring - assembl, seal ring - assembl, rear bearing insert, front bearing insert, gland steam regulator assembly, flat spring, membrane assembly, cup, driving half-coupli, ring, driven gear, electric pump shaft, bearing(626)

CTN :40754162

02 Aug, 2025 NA

Uttara Kannada - Karnataka

Tender For corrigendum : tender for supply of pump spares - rear cover v07 mc wcb , front cover v07 mc wcb , gasket rear cover v07 ptfe , gasket casing v96 ptfe , gasket sleeve v96 ptfe , gasket impeller v96 ptfe , mechanical seal cartridge id55 od 82 wl26.5 c/sic duplex vit , casing v96 mc nab , impeller v96 mc nab to nes 747 pt.2 , front wear ring v96 nab to nes 747 pt.2 , back wear ring v96 nab to nes 747 pt.2 , impeller nut v96 mc nab to nes 747 pt.2 , sleeve shaft v96 phosphor bronze , shaft v96 en57 , coupling guard v96 ss304 forming , spring washer m12 ss 316 , plain washer m10 ss316 , spring washer m8 ss 316 , bolt hex m10x1.5 35mm ss316 ft , circlip b110 spring steel , key parallel ss410 408 7 r r , double row angular contact ball bearing 3310-a-2z , lock nut ss m50x15 skf no km10 , lock washer ss id50 skf no mb10 , key ss410 70 10 8 rf , bolt allen m8x1.25x35 ss 316 , grease nipple 1 by 8 inch angled ss 316 , grease nipple 1 by 8 inch straight ss 316 , oil seal od65 x id45 x thk 8 viton , drain plug hex 1 , o ring id 44x3 nbr , key ss410 52 12 8 r r , stud m12x1.75x60l , stud m8x1.25x55l20tx20nss316 , disc coupling n55-230mm spacer , bearing deep groove ball 6310 2z c3 , impeller v07 mc nab , mechanical seal cartridge id 48 od74 wl24.6 c/sic duplex vit , shaft v07 en57 , bearing frame v07 mc wcb , front wear ring v07 mc nab , back wear ring v07 mc nab , gasket impeller w66 ptfe , impeller nut v07 mc nab , sleeve shaft v07 phosphor bronze , hex nut m8 ss 316 , squre head plug 14 bsp ss 316 , coupling spacer-140mm rrs-110 32mm pump end & 42mm motor end , stuffing box v07 mc nab , stuffing box v96 mc nab to nes 747 pt.2 , eye bolt m12x1.75 ms , motor bracket v96 45k motor ms , top mounting plate v96 45kw motor ms , hex nut m16 ss 316 , m12 washer ss 316 , plain washer m16 ss 316 , hex nut m6 ss 316 , bolt hex m16x2 80 mm ss 316 ft , bolt hex m16x2 110mm ss 316 ft , bolt hex m6 12mm ss 316ft , plain washer m6 ss316

CTN :40961247

01 Aug, 2025 7.62 Lacs

Tiruvallur - Tamil Nadu

Tender For corrigendum : supply of pipe gr: st 10 57mm od x 3mm thk , plate gr: st 40-3-t 12x1400x3000 , al bronze 100mm dia bar

Central Government / Public Sector

CTN :41161161

11 Aug, 2025 NA

Guntur - Andhra Pradesh

Tender For supply of set of gauges consists of 1.gauge for side bearer wearing bronze piece - 2 nos 2.gauge for side bearer wearing plate thickness- 2nos 3.comb gauge for measuring fla nge thickness of bg wheels- 5nos 4.wheel diameter gauge fitted with vernier scale (mod el wd 1)- 2nos 5.gauge for measuring dash pot oil level( flexible wire gauge)- 4nos note: material required as per the attached specification & drawings [ warranty period: 30 months after t he date of delivery ]

CTN :40387824

01 Aug, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : supply of spare parts for prd 750 drilling unit - tower light amber as per specifications and part number in the annexure , breather as per specifications and part number in the annexure , air breather as per specifications and part number in the annexure , safe spiral for hose as per specifications and part number in the annexure , safe spiral for hose as per specifications and part number in the annexure , cylinder as per specifications and part number in the annexure , piston cup as per specifications and part number in the annexure , valve cover as per specifications and part number in the annexure , sansel rpm sensor without sensor as per specifications and part number in the annexure , sensor as per specifications and part number in the annexure , grease nipple m10 as per specifications and part number in the annexure , grease nipple m8 as per specifications and part number in the annexure , cam follwer bearing as per specifications and part number in the annexure , hose as per specifications and part number in the annexure , fuel display indicator as per specifications and part number in the annexure , fuel sensor as per specifications and part number in the annexure , digital temperature controller as per specifications and part number in the annexure , thermocouple as per specifications and part number in the annexure , hour meter as per specifications and part number in the annexure , magnetic pick up as per specifications and part number in the annexure , suction strainer as per specifications and part number in the annexure , filter element as per specifications and part number in the annexure , 6 mtr throttle lever assy as per specifications and part number in the annexure , bronze plate as per specifications and part number in the annexure , hyd piston pump_variable as per specifications and part number in the annexure , l nylon as per specifications and part number in the annexure , valve ball as per specifications and part number in the annexure , valve seat as per specifications and part number in the annexure

Karabiner Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

Central Government / Public Sector