Kerb Wall Repair Tenders

State Government

Tender For construction of brick masonry wall &amp teen shed work for cleaning grading machine in covered shed size 40x75 at kums ramganjmandi district kota.

State Government

Tender For reconstruction of collapsed compound wall in front of the university campus, kariavattom from golden jubilee building to men s hostel compound- replacing of dismantled grill portion with solid block masonry

Central Government And Public Sector

Tender For repairs to tilted and collapsed portion of ucr masonry compound wall at cto campus solapur

Tender For repair work at the godown in kheda-nadiad district - (1) install a new turbo fan (2) turbofan repair (3) repairing of leaves (4) wall masonry (4) rooftop repair work (5) shutter repair (6) pigeon net (iron/steel)

Tender For material procurement - material work, stone aggregate(single size): 40+b14:b93 mm nominal size, stone aggregate(single size):20 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), sundries, wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia, twisted steel/deformed bars, stone aggregate(single size): 10 mm nominal size, stone for masonry work, solid blocks of size 30x20x20cm, wall form panel 1250x450xmm, corner angle 45x45x5 mm 2.50 long, column clamp 450x1070 mm, prop 2 m (2-3.5m), structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), second class kail wood in planks, second class kail wood in scantling, hollock ballies 125 mm diameter, adjustable span eso+si (2.35-3.40), solid blocks of size 30x20x15cm, mild steel tubes electric resistant or induction butt welded, mild steel round bar 12 mm dia and below, flats up to 10 mm in thickness, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, factory made glass reinforced plastic door frame 90x45 mm i/c carriage, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, powder coated m.s. butt hinges 100 mm x58 mm x 1.9 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), pvc pipe 110 mm outer dia 6kgf/cm2, pvc pipe 15 mm outer dia 10kgf/cm2, pvc pipe 32 mm outer dia. 10kgf/cm2, pvc pipe 40 mm outer dia. 10kgf/cm2, pvc pipe 63 mm outer dia . 6kgf/cm2, pvc vent cowl 63 mm dia, pvc vent cowl 110 mm dia, brass bib-cock-15 mm dia, pvc elbow 63 mm dia, pvc 45 degree elbow 63 mm dia, pvc door elbow 63 mm dia, pvc bend 63 mm dia, pvc tee 63x63x63 mm dia, pvc socket/coupling 63 mm dia, pvc elbow 110 mm dia, pvc 45 degree elbow 110 mm dia, pvc door elbow 110 mm dia, pvc bend 110 mm dia, pvc tee 110x110x110mm dia, pvc socket/coupling 110 mm dia, pvc pipe 25 mm outer dia . 12 kgf/cm2, vitreous china orrisa type w.c. pan size 580 mm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, black plastic seat (soild) with lid c.p.brass hinges and rubber buffers, vitreous china pedestal type wate closet, vitreous china flat back wash basin 550x400 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, polyethylene water storage tank with cover and suitable locking arrangemnet, fine sand (zone iv), vitrified floor tile 60x60 cm, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., multi surface paint, special primer (c.w), black japan, synthetic enamel paint in black or chocolate shade, mild steel plates, g.i. pipes 40 mm dia, mild steel round bar above 12 mm dia, welding by electric plant, stainless steel (grade - 304) hollow section round/square tubes, stainless steel bolts /square bar and plates

Tender For supply of supply of 1.0tr high wall mounted inverter split ac , supply of 1.5tr high wall mounted inverter split ac , supply of 2.0tr high wall mounted inverter split ac , installation testing and commissioning of above inverter split ac units , supply and laying of refrigerant piping kit , supply and laying of drain piping , covering of refrigerant piping , supply and laying of power cable , construction of brick or masonry pedestal where ever required including plastering , supply and laying of upvc cable management system

Central Government/Public Sector

Tender For provn of stone masonry wall for strengthening of nallah with allied works and provn of approach path at unit area of 9 para sf under ge south udhampur

Central Government/Public Sector

Tender For scope of work (sow) as mentioned in tender and schedule of work( 38 )items as given below ,[1] cleang of sewer lines of any diameter 250.000 m,[2] cleang mhole,any size/depth,split bamboo 50.000 ea,[3] placg circular pre-cast cc manhole cover 50.000 ea,[4] remvg blockage of any dia after earthwrk 300.000 ea,[5] carry,load/unload,pre-cast mh cover slab 100.000 ea,[6] cutting wall of manhole to connect sewer 250.000 ea,[7] brick masonry work with m-50 bricks 50.000 m3,[8] labour required f/brickwrk in cm1:6 25.000 m3,[9] fixg 225mm rcc hume pipe,depth<1.5m,wall 50.000 m2,[28] reinf f/reinf conc wrk,grd flr/<4m 1.000 to,[29] hire, lbr for 25-30mm thk wooden shutter 100.000 m2,[30] remvng,chockage of wc 100.000 ea,[31] clng&rmvg conservancy garbage w/rubbish 100.000 m3,[32] cleang sludge,mud etc frm roadside drain 100.000 m3,[33] dismantle rc slab, floor, remove rubbish 10.000 m3,[34] recover brick from dismantle, min 150nos 1.000 m3,[35] bailing/pumping out water from manhole 500.000 m3,[36] remvng,silt,sludge etc 400.000 m3,[37] clng,epwc with acid 50.000 ea,[38] clng,ipwc basin w/acid 50.000 ea

Central Government And Public Sector

Tender For supply and application of refractory castable materials and related materials, along with repair and maintenance on door delivery basis at hbl plant sugauli - supply and application of refractory castable materials and related materials, along with repair and maintenance on door delivery basis at hbl plant sugauli, as per the below details and attached tender document:, supply of fire crete super (medium purity dense castable)packaging type: packet, type: 70% alumina castablechemical: al2o3 (68% to 72%), cao (5.2% to 6.2%), fe2o3 (4.8% to 5.5%)nature of bond: hydraulicmax. service temperature: 1450 deg cel. or morepackaging size: 25 kgstate: dry powderedmake: calderys india refractories ltd / trl krosaki refractories limited / dalmia ocl, supply of refractory mortarproduct class: refractory monolithictype: 50% alumina mortar (coarse)chemical: al2o3 (45% to 50%), fe2o3 (3.8% to 4.8%)nature of bond: chemical / ceramicmax. service temperature: 1500 deg cel. or morepackaging size: 25 kgstate: drymake: calderys india refractories ltd. / trl krosaki refractories limited / dalmia ocl, tiles for boiler roof and bank zone side wall (both sides),size: 300 mm 300 mm 50 mm,quantity: 500 nos. (male female),as per the approved sample (sample collection under the supplier s scope)., repairing / replacement of damaged tiles to new tiles (approx. 300 nos)a. boiler bank zone (both sides)b. boiler roof, dismantling of old refractory & application of new castable refractory masonry work as per below scope of works.the broad scope involves complete dismantling and disposal of old refractory material and application of new castable refractory masonry in specified zones. the scope includes, but is not limited to, the following:dismantling of old refractory: removal of damaged, worn-out, or unserviceable old refractory material (brick, castable, insulation, etc.). manual/mechanical chipping and demolition as per site condition. collection, segregation, and safe disposal of dismantled refractory debris to the designated location inside the plant premises as directed by the engineer-in-charge. cleaning and surface preparation of the exposed area for new refractory lining. inspection and reporting of any damages to anchoring systems or structural parts.installation of new castable refractory: supply of new refractory shall be in hbl scope. surface cleaning and preparation prior to refractory application. mixing of castable using approved method (with pan mixer or mechanical mixer) and maintaining required water ratio. application of castable refractory using shuttering/moulds or free hand as per site requirement. compaction using poker vibrators for ensuring proper density and bonding. curing of refractory as per technical data sheet (tds) of the manufacturer minimum 24-48 hours water curing. removal of shuttering, inspection, and touch-up wherever required. final drying and heating-up (if in scope) under supervision of oem/engineer-in-charge., filling of ceramic wool.

State Government

Tender For corrigendum : e tender for the renewal and replacement of damaged retaining wall and stone masonry work of tl no 3 and 4 of 220 kv bhakra jamalpur double circuit line