Latest kerosene Tenders | Government kerosene Tenders

corporations/Associations/Others

CTN :45030187

05 May, 2026 6.27 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of 6 id di water supply pipeline by making connection from existing 16 id ci rising main to the ugr near kerosene pump sector 29 chandigarh for strengthening of water supply distribution network in sector 29 chandigarh under the

corporations/Associations/Others

CTN :45034145

20 May, 2026 43.16 Lacs

Jhansi - Uttar Pradesh

Tender For providing of construction of drain for 2x210 mw ash water recirculation system at ptpp, parichha. - engaging jcb on hire bases including hire fuel driver helper etc. complete. , clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. , demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of material within 50 metres lead as per direction of engineer-in-charge in lime mortar , earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. , filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. , providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - all work up to plinth level : 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) , "centering and shuttering including strutting, propping etc. and removal of form for : suspended floors, roofs, landings, balconies and access platform" , steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.thermo-mechanically treated bars , random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : cement mortar 1:6 (1 cement : 6 coarse sand) , brick work with fly ash (non modular) bricks of class designation 7.5 in foundation and plinth incement mortar 1:6 (1 cement : 6 coarse sand) , 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) , supplying and filling in plinth with jamuna sand under floors, including watering, ramming, consolidating and dressing complete. , "hire charges of pump set of capacity 4000 litres/hour for dewatering which include cost of services of operating staff, cost of lubricating oil, diesel / petrol/ kerosene oil , other consumables for running the plant and machinery. the hire charges of plant machinery on per day basis are for single shift of eight working hours." , providing and laying non pressure np-4 class (heavy duty) r.c.c. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 900 mm dia rcc pipes.

Central Government And Public Sector

CTN :45047627

21 May, 2026 NA

Chittorgarh - Rajasthan

Tender For supply of gasket remover and paint stripper,industrial grade heavy duty penetrating oil (6030 pen oil)

corporations/Associations/Others

CTN :44898466

11 May, 2026 11.07 Lacs

Raigad - Maharashtra

Tender For corrigendum : dg mahad industrial area. m and r to wss and eds mahad, poladpur and roha industrial area. filtration of transformer oil including minor repairs.

CTN :45042578

11 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of others - cond. different types of m&p items consisting of 1] sc. power pack, petrol driven engine [hrd], make- lukas, qty-1 no, 2] sc. control desk, make- lukas, qty-1 no, 3] sc. re railing bridge 1.1 mtr height 184 mm, make- lukas, qty-1 no, 4] sc. telescopic jack hp 65/t 400r, make- lukas, qty-4 nos, 5] sc. telescopic jack hp 25/t 450r, make- lukas, qty-4 nos, 6] sc. claw jack hp 50/p 850r, make- lukas, qty-3 nos, 7] sc. holding wire rope, make- na, qty-5 nos, 8] sc. inflatable tower light m/c 3.5 hp, make- aska, qty-2 nos, 9] sc. power pack 8.3 hp, diesel driven [hre], make- greaves ltd., qty-2 nos, 10] sc. portable generator set petrol/kerosene driven ,1.5 kva , make- greaves ltd., qty-6 nos, 11] sc. re-railing bridge 2.2 mtr, make- lukas, qty-1 no, 12] sc. re-railing ramp [ci] , make- na, qty-2 nos, 13] sc. pulling device,cap-220 kn, make- lukas, qty-1 no, 14] sc. jack 65/t small, make- lukas, qty-1 no, 15] sc. jack lukas 100 kn single act dia 60 mm, make- lukas, qty-1 no, 16] sc. jack 25/t 185 r [small], make- lukas, qty-2 nos, 17] sc. jack 65/t [big], make- lukas, qty-2 nos, 18] sc. rail grip for axle pusher, make- lukas, qty-1 no, 19] sc. hydraulic jack [manual] 10/t-2 nos & 30/t-1 no, make- na, qty-3 nos, 20] sc. hose pipe rubber, make- na, qty-11 pairs, 21] sc. cutter lukas [hrd], make- lukas, qty-1 no, 22] sc. spreader with spare nose, make- lukas, qty-1 no, 23] sc. combo cutter lukas, make- lukas, qty-1 no, 24] sc. base of jack 25/t , make- lukas, qty-1 no, 25] sc. base of claw jack, make- lukas, qty-2 nos, 26] sc. line closure for pulling device , make- lukas, qty-2 nos, 27] sc. axle pusher head , make- lukas, qty-4 nos, 28] sc. claw jack head , make- lukas, qty-4 nos, 29] sc. height piece for [radious plate] telescopic jack [ai] , make- lukas, qty-2 set, 30] sc. claw jack rope head , make- lukas, qty-4 nos, 31] sc. bridge stopper[triangular shape] , make- lukas, qty-3 nos, 32] sc. roller carriage , make- lukas, qty-3 nos, 33] sc. roller carriage top plate , make- lukas, qty-2 nos and 34] sc. portable diesel generator set , make- greaves ltd., qty-1 no. condition- 1. lot will be delivered as per qty mentioned in description column, 2. materials like nearby other machine and ferrous , nonferrous , ss items etc near/surrounding the offered items is not allowed for lifting or taking delivery and the same is required to be handed over to the custodian if so found, 2. picking and choosing of materials near the offered items is not allowed.3. purchaser has to make his own arrangement for lifting and taking delivery of the lot.4. custodian may allow purchaser to bring crane if it is required and justified.5. the lot will be sold on "as is where is basis", 5. cutting/dismantling of sold lot is allowed.

CTN :45046491

20 May, 2026 NA

Medak - Telangana

Tender For supply of kerosene oil

CTN :45045254

11 May, 2026 1.32 Crore

Tiruvallur - Tamil Nadu

Tender For supply of kerosene superior quality confirming grade-i as per is: 1459/1974

CTN :44974379

04 May, 2026 20.00 Lacs

Medininagar - Jharkhand

Tender For meterial required for wtp - ferric alum /non ferric alum grade 4, bleaching ( aditya birla ) industrial grade (for wtp), lime ( hydrated lime ) industrial grade (for wtp), galansuta 8, 10, 12 & 16 , 20 mm, grease ( castrol /servo /nbc ), coupling tyre 15, 16 & 17 no., nut & bolt, washer, tyre coupling set different sizes, rubber ( for gasket ), copper lug (ring) 16 ,25, 35,50 mm, alluminiam lug 35, 50, 70,95, 240, 300 mm, relay ( l&t/ havels ) 110 amp. , 70 amp., contactor ( l&t/ havels ) 110 amp. , 70 amp., copper wire 3 core 50 sq.mm , 3 core 35 sq.mm, alluminium wire 4 core 50 sq.mm , 3 core 35 sq.mm, copper wire 16 sq.mm, insulation tape (pvc) red , yellow , blue, glass tape roll, cotton tape roll, transformer oil, sluce valve 150 mm, 200 mm, 300 mm, check valve 100 mm, 150 mm,, ball valve (brass ) 1/2 inch, 3/4 inch, 1 inch dia., g.i pipe nipple size 3 & 4 inch 1/2 inch, 3/4 inch, 1 inch dia., pvc end plug ( solid type ) 1/2 inch, 3/4 inch, 1 inch dia., m-seal 250 grm. pack, materials required for hand pump handle ( bharat/india mark ii ), head ( bharat/india mark ii ), pedastal ( bharat/india mark ii ), water tank ( bharat/india mark ii ), chain ( heavy ), axle ( heavy ), ball bearing, conecting rod with socket 12 mm 10 length (stainless steel ), g.i pipe ( tata/jindal/supreme ) 10 length , 32 mm dia., cylinder assembly complete set 2.5" (gun metal ), black tape 1" & 2", cylinder body2.5", rod socket ( ss) 12 mm, pipe coupling/socket ( tata ) 1.25" ( 32 mm ), front cover ( bharat/india mark ii ), check valve with washer, cylinder ring ( lather ), croom washer ( burhani/ nizora ), dlp nut bolt, plunger, handle axle (stainless steel ), check valve washer, three plate, cylinder rod, ss hexagonal bolt m-6x25 mm long, chain nut bolt

Central Government/Public Sector

CTN :45029912

05 May, 2026 NA

Guwahati - Assam

Tender For upkeepment & grass cutting including jungle cleaning of industrial,domestic & roadside area along the outside periphery of boundary wall including iocl-bgr oil terminal under ps6, bongaigaon for a period of 1 year and extendable by 1 year upon management approval.

Central Government/Public Sector

CTN :45024562

16 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of pr for rate contract for industrial oils for the year - oil , servo torque 10 , 200-210l barrel , oil , servo cut 945 , oil , servo lubrex 22 , 210l , oil , servo coat 120 , 200 kgs , oil , servo coat 170t , 200 l , oil , servo cyl c 800 , oil , servo spin 12 , 210l , oil , servo steel 680 , oil , servosystem 32 , oil , servomesh sp 150 , 210l , oil , servosystem 150 , 210l , oil , servosystem 68 , 210l , oil , servosystem 220 , 210l , oil , servosystem 320 , 210l , oil , servosystem 460 , oil , servo way 68 , 210l , oil , servo cut super , oil , servo cut 335 , 210l , oil , servo cyl c 460 , 210l , oil , servo cyl c 680 , oil , servomesh sp 68 , 210l , oil , servomesh sp 100 , 210l , oil , servomesh sp 460 , oil , servomesh sp 680 , 210l , oil , servo friz 32 , oil , servo friz 68 , 210l , oil , servo press 100 , oil , servo press 220 , oil , servo therm special , coolant , hp powerkool rr , lubrication syst , oil , shell tivela s 220 , oil , synth gear , vg1000 , oil , servo cyl m 1000 , oil , servomet 033 , hisafe c-190 , servo syngear 320 oil , servo syngear 460 oil , oil , iso vg 320 , syn (pao)

Kerosene Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

Central Government And Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector