Latest kirschner wire Tenders | Government kirschner wire Tenders

Central Government/Public Sector

CTN :45681589

26 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of coach set of frames for seats and back rests of lws bw2 coach consist of the following 1) four seater frame to drg. lg61229,alt- nil- to quantity-20 nos, 2) single seater frame-rh to drg. lg61233,alt- nil- to quantity-10 nos, 3) single seater frame-lh to drg. lg61231,alt nil- to quantity-10 nos, 4) four seater backrest frame to assembly of frame and cushion support to drg. lg61234, alt-nil,item 1,2,5 and 6 to quantity-20 nos, 5) single seater back rest frame to assembly of frame and cushion support to drg.lg61237, alt -nil ,item 1, 2,5 and 6 to quantity-20 nos, 6) single seater(mounting) frame assembly- (double) to drg.lg61201, alt- d to quantity-8 nos 7) single seater (mounting) frame assembly- lh to drg.lg61202,alt -c to quantity- 2 nos, 8) single seater (mounting) frame assembly- rh to drg.lg61203, alt-d to quantity- 2 nos and 9) sleeve for single seater frame to drg.lg61219, alt-a to quantity-12 nos please visit icf vendor portal for downloading drawing https://vp.icf.gov.in/vendtendordetnew.php using key:0726c1i82tn1155 [ warrantyperiod: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45646932

07 Jul, 2026 2.33 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground-establishment of sports infrastructure facilities at kalavayal ground in puthenkurish grama panchayath in kunnathunadu lac, ernakulam- supply and installation of open gym equipment - retender - open gym equipments, od48095/2026-2027 rower - supply and installation of rower having the following specifications: dimensions: (l x w x h) = 1472 x 915 x 1040 mm. upper and bottom pipes 88mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. handle - 33 mm od b class g.i pipe. angle between handle and horizontal surface is 75 - 80 degree. linkages 48 mm od b class g.i. pipe. seat & back rest 380 x 275 x 60mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. foot resting pipe - 60 mm od b class g.i. pipe. end closing cap dome shape made by pp / nylon / hdpe material. closing caps pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe.height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. pin 25 mm m.s. bright bar pin. circlips a 24 circlips are used for assembly. bearing bushes - 60 mm od seamless pipe / bar. bearing- use is 6005 permanent lubricated reputed brands. grips high quality rubber 46 mm od. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be min m20 cc and design shall be approved by the engineer-in -charge before installation.), od48569/2026-2027 cross trainer (double) - supply and installation of double cross trainer having the following specifications: dimensions: (l x w x h) 2280 x 550 x 1650 mm. main frame- made of 88 mm od ?b? class gi pipe dually bending design. foundation plate ? m.s. round plate of 250 mm & 8 mm thick. paddle vertical support - 42 mm od ?b? class gi pipe. handle - 33 mm od ?b? class gi pipe dually bending design. leg movement frame ? 50 mm x 50 mm x 2 mm thick square pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use for to support it. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s? pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od b class g.i. pipe. and top support of m.s. round plate of 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. grips - high quality rubber. bearing- use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25mm m.s. bright bar. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 80-100 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be min m20 cc and design shall be approved by the engineer-in -charge before installation.), od48098/2026-2027 air walker - supply and installation of air walker having the following specifications: dimensions: (l x w x h) 1190 x 380 x 1244 mm. main frame- ø 88 mm od "b" class gi pipe dually bending design.foundation plate- m.s. round plate of ø 250 mm & 8 mm thick. paddle ø 42 mm od round gi pipe. handle - ø 33 mm od "b" class gi pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use to support it. top closing cap dome shape made by pp / nylon / hdpe material. closing cap's - pp / nylon / hdpe material. bracket - 8 mm thick laser profile is used to s

CTN :45646934

07 Jul, 2026 2.25 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground -development of jai hind stadium in njarackal grama panchayath in vypin lac, ernakulam district-supply and installation of open gym equipment - outdoor gym equipments, od268048/2025-2026 chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od “b” class gi pipe. foundation plate –m.s. round plate of ø 250mm & 8 mm thick. foundations cover capdome shape of pp / nylon / hdpe material. remaining frame -made up of ø 48 mm od “b” class g.i. pipe. handle - made up of ø48mm od “b” class g.i. pipe. link - made up of ø 48 mm od “b” class g.i. pipe. seat & back rest – 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 in-sert wall thickness 3 to 4 mm. bearing bush closing cap’s– pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap – dome shape made by pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe.height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin – made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips–a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od268050/2025-2026 air walker - supply and installation of air walker having the following specifications: dimensions: (l x w x h) 1190 x 380 x 1244 mm. main frame- ø 88 mm od ?b? class gi pipe dually bending design. foundation plate?m.s. round plate of ø 250 mm & 8 mm thick. paddle? ø 42 mm od round gi pipe. handle ? ø 33 mm od ?b? class gi pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use to support it. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s -pp / nylon / hdpe material. bracket - 8 mm thick laser profile is use to support paddle frame. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe.height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brands. pin?s ? ø 25mm m.s. bright bar pin. circlips? a 24 circlips are used for assembly. bearing bushes -ø 60 mm od seamless pipe. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od268054/2025-2026 rower - supply and installation of rower having the following specifications: dimensions: (l x w x h) = 1472 x 915 x 1040 mm. upper and bottom pipes - 88 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. handle - 33 mm od b class g.i pipe. angle between handle and horizontal surface is 75 - 80 degree. linkages 48 mm od b class g.i. pipe.seat & back rest 380 x 275 x 60mm thick high-density polyethylene (hdpe) blow molded with m10 in-sert wall thickness 3 to 4 mm. foot resting pipe - 60 mm od b class g.i. pipe. e

CTN :45533008

20 Jun, 2026 4.60 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground - development of vankulathuvayal stadium in azhikode grama panchayath in azhikode lac, kannur -supply and installation of outdoor gym equipment - retender - open gym equipment, od405580/2025-2026 horse rider - supply and installation of horse rider having the following specifications: dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon / hdpe material. remaining frame is made by 48 mm od b class gi pipe. seat frame is made by 48 mm od b class gi pipe. seat position must be horizontal to 110 -120 degree. link- made up of 48 mm od b class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od b class gi pipe. paddle vertical support - 60 mm od b class gi pipe. handle frame- 42 mm od b class gi pipe dually bending design. foot pipe - 33 mm od b class gi pipe. support frame 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe. bearing bush closing cap pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405586/2025-2026 leg press (double) - specifications: dimensions: (l x w x h) = 1676 x 400 x1500 mm. main frame - 114 mm od ?b? class gi pipe. foundation plate m.s. round plate of 250 mm &8 mm thick. foundations cover cap - dome shape of pp / nylon / hdpe material. link - is 60 mm od b? class gi pipe. seat frame - 42 mm od b class gi pipe. leg press back rest should be angled in 120 -130 degree. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 2 mm thick use to support it. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. link connected with frame by 8 mm thick laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s- pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brand. pin 25 mm m.s. bright bar pin. bearing bushes - 60 mm od seamless pipe. circlip? a 24 circlips are used for assembly. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405583/2025-2026 back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od b class g.i. pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm

CTN :45533036

20 Jun, 2026 7.99 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground- development of ezhikkara grama panchayath ground in paravur lac, ernakulam district- supply and installation of open gym equipment - retender - inauguration stone and interlock laying for open gym area, od34726/2026-2027 providing and fixing 18 mm thick gang saw cut, mirror polished, pre-moulded and pre polished, machine cut for inauguration granite stone of required size, approved shade, colour and texture laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) joint treated with white cement, mixed with matching pigment, epoxy touchups including rubbing, curing etc. complete at all levels. area of slab over 0.50 sqm, 16.21 engraving letters in hard stone, od419846/2025-2026 providing and laying of interlock concrete block pavements having thickness 60mm (m35) as per drawings and technical specification clause 1504 confirming to is 15658 and laid in required colour and pattern over and including 50mm thick compacted bed of 6 mm metal including edge concreting for 300mm width and 150mm depth with cc m35( @ 0.045 m3/m), supply and installation of open gym equipment, od27550/2026-2027 chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od ?b? class gi pipe. foundation plate ?m.s. round plate of ø 250mm & 8 mm thick. foundations cover cap- dome shape of pp / nylon / hdpe material. remaining frame - made up of ø 48 mm od ?b? class g.i. pipe. handle - made up of ø48mm od ?b? class g.i. pipe. link - made up of ø 48 mm od ?b? class g.i. pipe. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. bearing bush closing cap?s? pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin ? made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips?a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od30940/2026-2027 surfboard - dimensions: (l x w x h) 1090 x 890 x 1390 mm. main frame made from two pipes of ø 114 mm od b class gi pipe. foundation plate m.s. round plate of ø 250 mm & 8 mm thick. connecting pipe - ø 88 mm od b class gi pipe is used to connect both main frame pipes at top end and ø 42 mm pipe is used to connect at bottom end. handle - ø 42 mm and ø 33 mm od b class gi pipe. support pipe ø 60 mm must be used to support leg movement frame. leg movement frame ø 42mm od b class gi pipe. footrest - cast iron 325 x 270 x 8 mm thick and m.s. plate of 250 x 200 x 2 mm thick use for to support it. bracket - 8mm thick laser profile is used to support leg movement frame. top closing cap dome shape made by pp / nylon / hdpe material. closing caps pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. grips - high quality

State Government

CTN :45533112

23 Jun, 2026 1.44 Lacs

Bahadurgarh - Haryana

Tender For job no.1214/2026 (hew) work of providing and fixing and installation open gym equipments and supply and installation chair type garden bench near h. no.860 in sector-13 at u/e bahadurgarh and all other works contingent thereto. - 26.58.1 supply and installation of garden bench1 chair type garden bench with l-shaped sides made of reinforced concrete (m30), thickness 100 mm, overall height 1000 mm, base width 620mm. back and seat shall consist of 5 nos. reinforced concrete planks 1500 mm x 100 mm x 50 mm one plank 1500 mm x 200 mm x 50 mm. seating height of the bench shall be 450 mm. the bench shall be fixed with nuts on concrete mount, all holes sealed after assembly and installation. all materials required to be as per bis specifications., app. item double cross trainer main pipe 114 mm od & 3.75 mm thickness m/s round pipe handles made of 38mm x31 mm m/s round pipe with best quality rubber handle for hand grip working with rubber seal bearing system and foot rest main pipe for 60 x 40 mm m/s flat pipe size of foot rest 5.5"x12" with base plastic cover all alloy cover with ss cover all m/s pipe best quality powder coating., app. item double leg press main round pipe 114 mm od & 3.75 mm thickness m/s round pipe seat made of m/s sheet 16gauge size of seat is 12"x12" fixed on 48 od round pipe smoothly working with rubber bearing system all alloy covered with s.s cover plastic base cover and best quality powder coating., app. item shoulder bilder main pipe 114 mm od & 3. 75mm thickness 17" round wheel made of 31 mm round pipe 25 mm round pipe with bearing system and s.s nut cover with plastic handle and u bend join with main 114 mm pipe for steering wheel is 48 mm od round pipe all alloy cover withs s cover best quality plastic handle on wheels &base fixed with nut bolt 8 mm m/s plate with plastic cover with best quality powder coating, app. item double chest press made of 114 mm od & 3.75mm thickness 38 mm round pipe 48 mm round pipe soxs0 mm sq pipe complete operating with bearing system with rubber seal bearing all alloy are covered the s.s covers & best quality rubber handles for grip and smoothly working. plastic base cover and best quality powder coating

CTN :45512779

22 Jun, 2026 NA

Bathinda - Punjab

Tender For supply of 250 mm long x 2.0 mm dia, both ends trocar point assorted size tt , kirschner wire, smooth, length 150 mm with double trocar tip 1.5 mm to 3 mm at 0.5 mm increments. assorted size tt , kirschner wire, smooth, length 150 mm with double end diamond tip.1.5 mm to 3 mm at 0.5 mm increments. assorted size tt , kirschner wire 15 cm long x 1.5 mm dia, both ends trocar point , kirschner wire 15cm x 2mm, both ends trocar assorted size tt , threaded kirschner wire stainless steel 1.5mm dia assorted size tt , olive wire for ilizarov bayonet tip, 1.5x300mm assorted size tt , threaded guide wire, 3.2mm diameter with stop, length 25 cm approx. assorted size tt , guide wire 2.5 mm dia x 22 cm , threaded guide wire 2.5 mm dia x 22 cm assorted size tt , schanz screws 2.5mm self drilling and tapping 100 mm length. assorted size tt , schanz pins dia 2.5 mm x 150 mm. assorted size tt , schanz pins dia 4 mm x 150 mm. assorted size tt , schanz pin 3.5 mm dia,self drilling and tapping 100 mm length. assorted size tt , hydroxyapatite coated schanz pin size 6 or 5mm assorted size tt , hydroxyapatite coated tapered schanz pin size 4.5 or 3.5 mm assorted size tt , circlage wire 18,20, 22 gauge assorted size tt , drill bits solid 1.5 mm assorted size tt , drill bits solid 2.0 mm assorted size tt , drill bits solid 2.5 mm assorted size tt , drill bits solid 3.2 mm assorted size tt , drill bits solid 3.5 mm assorted size tt , drill bits solid 4.5 mm assorted size tt , long drill bits for 4.9 mm interlocking bolts assorted size tt , drill bits solid for 5 mm locking screws. assorted size tt , washer for cannulated cancellous screw large 13 mm assorted size tt , washer for cannulated cancellous screw small assorted size tt , cannulated cancellous screws 6.5 mm, fully threaded assorted size tt , cannulated cancellous screws 6.5 mm, partially threaded, thread length 16 mm assorted size tt , cannulated cancellous screws 6.5 mm, partially threaded assorted size tt , cancellous screws, large fragment, 6.5 mm, fully threaded assorted size tt , cancellous screws large fragment , 6.5 mm, partially threaded, assorted size tt , cancellous screws large fragment, 6.5 mm, partially threaded assorted size tt , malleolar screw with trephine tip 4.5 mm titanium , cannulated cancellous screws 4.0 mm partially threaded assorted size tt , cancellous screws, small fragment, 4.0 mm, fully threaded assorted size tt , headless compression screw 3.0mm assorted size tt , headless compression screw, 2.4 mm short thread assorted size tt , ao type joint spanning external fixator complete set with 04 x250 mm long ss tubes 11mm diameter, 02x150mm long ss tubes 11mm diameter,08x 5mm self drilling or tapping schanz screws,12x single pin , ao type external fixator set for tibia consisting of 2 x 300 mm long stainless steel tube 11 mm dia, 6 x 5mm self drilling or tapping shanz screws, 12 x single pin to tube clamps , ao type external fixator set for femur consisting of 2 x 400 mm long stainless steel tube 11 mm dia, 6 x 5mm self drilling or tapping stainless steel shanz , universal mini external stabilization system set complete, jess, for ctev medium assorted size tt , universal mini external stabilization system set complete, jess, for ctev small assorted size tt , rail fixator adult with 400 mm rail, 03x mounted locks and 09 tapered schanz screws 5 or 6mm complete set. assorted size tt , mono rail external limb reconstruction system lrs consisting of following 01 x mono rail 300 mm, 01 x central clamp, 01 x square cd unit 80 mm, 01 , ilizarov fixator frame complete set for deformity correction tibia, adult, consisting of 10 x160mm carbon fibre half rings,2x 160 mm //bid details 3 / 131 5 or 8 carbon fibre rings,1 x 160mm carbon fibre foot frame, , ilizarov fixator frame complete set for deformity correction tibia, paediatric, consisting of 8x130 mm carbon fibre half rings,2x 130 mm 5 or 8 carbon fibre rings,1 x 130 mm carbon fibre foot , distal radius external fixator system wi

State Government

CTN :45300981

17 Jun, 2026 5.67 Crore

Wardha - Maharashtra

Tender For corrigendum : supplying of furniture to newly formed cgrf office, for jr. law officer and mini training centre under o&m circle wardha tq. dist. wardha.-providing, supplying and placing of godrej make beat fabric high back 1.00chair with head rest. seat/back assembly: the seat & back is made up of1.2 ± 0.1cm thk. hot pressed plywood measured. upholstered with knittedfabric , over moulded high resilience polyurethane foam high back size:51.8 cm. (w) x 75.2 cm. (h) seat size : 49.0 cm. (w) x 48.8 cm. (d) highresilience (hr) polyurethane foam: the hr polyurethane foam ismoulded with density = 55+/-2 kg/m³ and hardness 16 ± 2 kgf as per is:7888for 25% compression. armrests: the adjustable armrest is designed with thefollowing features: • up-down adjustment– 8 steps (8.0±0.5 cm range) • heightadjustable armrest structure which is powder coated & fitted with an armresttop. • fixed armrest top is pu moulded over metal insert. front pivotsynchro mechanism: the adjustable tilting mechanism is designed with thefollowing features360° revolving type. • single point control. • front-pivot fortilt with feet resting on ground ensuring more comfort. • tilt tensionadjustment. • 4-position locking with anti-shock feature. • seat/back tiltingratio of 1:2 . back height adjustability: back can be adjusted in 5 positionsby manually. stroke of height adjustable spine is 7 cm. back height adjustabilityis applicable for high back and mid back chair. pneumatic heightadjustment: the pneumatic height adjustment has an adjustment stroke of10.0 ± 0.3 cm. pedestal assembly with castors: the pedestal is injectionmoulded in black 30% glass-filled nylon and fitted with 5 nos. twin wheelcastors. the pedestal pitch-centre dia is ø66.1 ± 0.5 cm. (76.1 ± 1.0 cm. withcastors) . twin wheel castors: the twin wheel castors are injectionmoulded in black nylon. option of sliding seat mechanism: seat can beslide horizontally as per user convenience. stroke of seat slide is 5 cm. thisoption is available for revolving pedestal type of chair. overall dimensions ofchair seat height - min 45.0 to max 55.0cm. height - min 102.0 to max 119.0cm. width & depth of chair as measured from p

CTN :45498830

01 Jul, 2026 19.33 Lacs

Ambala - Haryana

Tender For supply of threaded sizes from 10mm 75 mm at increment of 2mm , cannulated screw 4 point 5mm self tapping fully threaded sizes from 10mm 75 mm at increment of 5mm , cannulated cancellous screws dia 6 point 5 mm fully threaded from length 35 mm to 80 mm at intervals of 5 mm with washer ti 316l ss , cannulated cancellous screws dia 6 point 5 mm with 32 mm threading from length 35 mm , threaded kirschner wire 20 cm long into 1mm 1 point 5mm 2mm 2 point 5mm 3mm , pro into imal humerus anatomical locking plate complete construct with 6 locking and 4 cortical screws , distal radius volar locking plate complete construct with 6 locking and 3 cortical screws titanium , ilizarov fi into ator frame complete set fordeformity correction tibia adult consisting of 10 into 160 mm , pro into imal tibial lateral periarticular locking plate system left or right , pro into imal medial tibial locking plate system left or right complete construct , anterolatereal distal tibial periarticular plate system left or right complete construct , sterile disposable u drape with tube holders 80 into 124 4 into 44 split compliant , disposable leg o u drape bis us fda eu ce full quality assurance , disposable screen cover and trolley cover bis us fda eu ce full quality assurance , synthetic bone graft wedges sterile packed point usfda and ce approved point , post op dressing non woven non adherent with wound pad 5 into 7 point 2 cm 2 into 3 inches , post op dressing non woven non adherent with wound pad 8 into 15 cm , post op dressing non woven non adherent with wound pad 10 into 20 cm , post op dressing non woven non adherent with wound pad 10 into 25 cm , paraffin gauze dressing with antibiotic 10 , orthopedic tear resistant gloves different sizes size 7 or 7 point , ilizarov fi into ator frame complete set for deformity correction femur adult consisting , single use c arm cover pair sterile packed waterproof material point should be compatable with all model c arm point , cling drape film roll sterile transparent point , vertical isolation drape sterile for hip surgery , sterile disposable universal e into tremity drape with conforming circular fenestration tube holders , disposable o drape , drill bits solid 2 point 5 mm , drill bits solid 3 point 2 mm , drill bits solid 3 point 5 mm , drill bits solid 4 point 5 mm , cement gun for cement injection , high viscosity bone cement with antibiotic 40 gm , low viscosity bone cement with antibiotic 40 gm , reconstruction cephallomedullary nail femur complete construct with 02 cephalic lag , uncemented modular radial head prosthesis with modular radial head modular fluted stem //bid details 2 / 45

Central Government/Public Sector

CTN :45479217

10 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of coach set of frames for seats and back rests of lws bw2 coach consist of the following 1) four seater frame to drg. lg61229,alt- nil- to quantity-20 nos, 2) single seater frame-rh to drg. lg61233,alt- nil- to quantity-10 nos, 3) single seater frame-lh to drg. lg61231,alt nil- to quantity-10 nos, 4) four seater backrest frame to assembly of frame and cushion support to drg. lg61234, alt-nil,item 1,2,5 and 6 to quantity-20 nos, 5) single seater back rest frame to assembly of frame and cushion support to drg.lg61237, alt -nil ,item 1, 2,5 and 6 to quantity-20 nos, 6) single seater(mounting) frame assembly- (double) to drg.lg61201, alt- d to quantity-8 nos 7) single seater (mounting) frame assembly- lh to drg.lg61202,alt -c to quantity- 2 nos, 8) single seater (mounting) frame assembly- rh to drg.lg61203, alt-d to quantity- 2 nos and 9) sleeve for single seater frame to drg.lg61219, alt-a to quantity-12 nos please visit icf vendor portal for downloading drawing https://vp.icf.g ov.in/vendtendordetnew.php using key: 0726tzw9sfg1944 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Kirschner Wire Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector