Latest knee guard Tenders | Government knee guard Tenders

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

Central Government/Public Sector

CTN :45702761

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector,tapperbearing with polimer cage,doubelcupcollar,shockabsorber,hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger,iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel),castiron components, impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: bin n

CTN :45689898

06 Jul, 2026 NA

Gurdaspur - Punjab

Tender For supply of football , football net , football gloves , knee guard , elbow guard

CTN :45689158

06 Jul, 2026 1.08 Lacs

Varanasi - Uttar Pradesh

Tender For supply of abdomen guard , face mask , bibs cut sleeves , hand gloves , knee guard , practice ball , match ball , playing t- shirt, short and stockings , shin guards , stick bag , wrist band , skin tight upper and lower , mouth guard

CTN :45351453

24 Jun, 2026 4.00 Crore

Bhopal - Madhya Pradesh

Tender For corrigendum : e tender for hockey goods and equipment 2026 first call - hockey shoes men/women (imported) category (a) between rs-10000/- to 12000/- , hockey shoes men/women (imported) category (b) between rs- 8000/- to 10000/-, , hockey shoes men/women (imported) category (c between rs-7000/- to 8000/-, , hockey shoes men/women (imported) category (d) between rs-2500/- to 5000/-, , warm up shoes men/women (imported) category (a) between rs-7500/- to 10000/-, , warm up shoes men/women (imported) category (b) between rs- 5000/- to 7500/-, , warm up shoes men/women (imported) category (c) between rs-2500/- to 5000/-, , hockey sticks catagory (a) between rs-12000/- to 18000/-, , hockey sticks catagory (b) between rs- 10000/- to 13000/-, , hockey sticks catagory (c) between rs-7500/- to 10000/-, , hockey sticks catagory (d) between rs-5000/- to 7500/-, , knee guard catagory (a) between rs-20000/- to 25000/-, , knee guard catagory (b) between rs-1900/- to 2500/-, , knee guard category (c) between rs- 1300/- to 1900/-, , knee guard category (d) between rs- 650/- to 1300/-, , goal keeper kit full (imported) catagory (a) between rs-3,50,000/- to 5,25,000/-, , goal keeper kit full (imported) catagory (b) between rs-2,00,000/- to 2,50,000/-, , goal keeper kit full (imported) catagory between rs- 2,00,000/- to 2,50,000/-, , goal keeper kit full (imported) catagory (d) between rs- 1,25,000/- to 2,00,000/-, , goal keeper kit full catagory (e) between rs- 1,00,000/- to 1,30,000/-, , goal keeper kit full catagory (f) between rs- 55,000/- to 75,000/-, , face mask (imported) catagory (a) between rs- 10,000/- to 12,000/-, , face mask (imported) catagory (b) between rs-9,000/- to 11,000/-, , training uniform (male/female) imported, size 36-44 catagory (a) between rs- 2,000/- to 3,000/-, , training uniform (male/female) imported, size 36-44 catagory (b) between rs- 1,500/- to 2,000/-, , match uniform (male/female) imported size 36-44 catagory (a) between rs- 3,000/- to 3,500/-, , match uniform (male/female) imported size 36-44 catagory (b) between rs- 2,000/- to 3,000/-, , bibs shirt (male/female) size 36-44 catagory (a) between rs-800/- to 1,000/-, , bibs shirt (male/female) size 36-44 catagory (b) between rs-700/- to 900/-, , kit bag (medium) catagory (a) m-14 x10x12 between rs-1,500/- to 2,000/-, , kit bag (medium) catagory (b) m-14 x10x10 between rs-1,200/- to 1,500/-, , kit bag (large) catagory (a) l-25 ×12×12 between rs-2,500/- to 3,500/-, , kit bag (large) catagory (b) l-25 x12x12 between rs-2,000/- to 2,500/-, , traveling bag (wth wheel & trolly) (a) 28x12x14 between rs- 6,500/- to 9,000/-, , traveling bag (wth wheel & trolly) (b) 28x12x14 between rs-3,500/- to 4,500/-, , traveling bag (wth wheel) (a) 28x12x14 between rs- 4,500/- to 6,500/-, , traveling bag (wth wheel) (b) 28x12x14 between rs- 1,800/- to 2,500/-, , stocking syntetic category (a) between rs-400/- to 600/-, , stocking syntetic category (b) between rs-300/- to 400/-, , turf hockey ball pratice between rs- 190/- to 325/-, , turf hockey ball match between rs- 300/- to 500/-, , shinpad/shin guard category (a) between rs- 900/- to 1100/-, , shinpad/shin guard category (b) between rs-600/- to 875/-, , international hockey goal post category (a) between rs-7,00,000/- to 9,00,000/-, , international hockey goal post category (b) between rs-6,00,000/- to 8,00,000/-, , hockey goal post match category (a) between rs- 3,00,000/- to 4,00,000/-, , stop watch between rs- 4,000/- to 7,000/-, , wrist band between rs- 200/- to 250/-, , knee cap between rs- 300/- to 450/-, , anklet between rs-300/- to 450/-, , elbow between rs-300/- to 450/-, , hockey stick bag (multiple) between rs-3,500/- to 4,500/-, , hand gloves (left and right) between rs- 600/- to 900/-, , hooters superior quality between rs- 1,500/- to 3,000/-, , gum shield between rs-3,500/- to 5,000/-, , cone 6" 9" 12" between rs-200/- to 400/-, , hockey balling machine between rs- 5,00,000/- to 6,00,000/-, , rebound board bet

CTN :45632030

11 Jul, 2026 NA

Mumbai - Maharashtra

Tender For 26b84c004 knee guard (nsn4220-720488193) , 26b84c004 hand gloves (nsn8415-720511151) , 26b84c004 cuff restraints (nsn8465-720488183) , 26b84c004 elbow guard (nsn8465-720488192) , 26b84c004 hydration backpack (nsn8465-720488194)

CTN :45601399

09 Jul, 2026 4.12 Lacs

Lohit - Arunachal Pradesh

Tender For supply of mtb cycle , cycle helmet , knee guard , elbow guard , hand gloves , shoes , t shirt , track suit , water bottle , air pump , extra tyre for mtb cycle , extra tube for mtb cycle , torch cells 1.5 volt 4 amp

Central Government/Public Sector

CTN :45549993

06 Jul, 2026 NA

Nizamabad - Telangana

Tender For supply of corded hand held rotary hammer drill of 500-800watt, input voltage: 220-240 v, , rotation direction: forward and reverse chuck size: 25-30 mm, impact rate: 0-4000 ipm, function: drilling with rotary hammer, drilling capacity in metal: 13-25mm, consists of a motor, gears, and chuck with all parts enclosed in a protective housing with switches and handles for control. [ warranty period: 30 months after the date of delivery ] ]

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

Central Government/Public Sector

CTN :45486824

03 Jul, 2026 NA

Nizamabad - Telangana

Tender For supply of cordless brushless hand held drill machine, rotation direction: forward and reverse chuck size:1/2 inch, , function: drilling, drilling capacity in metal: 13 mm, speed - 0-1750 rpm (approx.), lithium ion battery of capacity 12-20 v and 4 ah or better to be supplied with battery and battery charger, consists of a motor, gears, and chuck with all parts enclosed in a protective housing with switches and handles for control [ warranty period: 30 months after the date of delivery ] ]

Knee Guard Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector