Latest knuckle pivot pin Tenders | Government knuckle pivot pin Tenders

Central Government/Public Sector

CTN :45173030

20 May, 2026 NA

Pushkar - Rajasthan

Tender For auction sale of rolling stock - cut up iron and steel scrap of condemned "heritage palace on wheel {hpow (bg)} coaches 7=14 unit with and without part of fitting with non ferrous attachment if any [01] 95558/wpctac/nwr [02] 95564/wpctac/nwr [03] 95557/wpctac/nwr [04] 95562/wpctac/nwr [05] 95553/wpctac/nwr [06] 95559/wpctac/nwr [07] 95563/wpctac/nwr . excluding railway reclaim parts as per hq jaipur�s letter no. m/101/4/ excl. comp. dated 04.05.2009 and dy cme[c&w] aii l.no.cp/m- 425/uts/pt.-iv dated 22.06.22 and dy.cme(c)/aii l.no. cp/pcn-140/s-492/18 pt.xxii, dated 24.08.2022 .reclaim items (mechanical) [1] water tank=nil [2] brake beam=56 nos [3] brake block hanger=112 nos [4] axle=28 nos [5] axle box housing=56 nos [6] helical spring (bolster) ac=56 nos [7] helical spring (axle box) ac=112 nos [8] helical spring (axle box) nac=nil [9] helical spring (bolster) nac=nil [10] lower spring seat=112 nos [11] wearing piece (bronze)=28 nos [12] equalising stay=28 nos [13] vertical shock absorber(600 kg)=28 nos [14] vertical shock absorber(900 kg)=nil [15] wheel set assembly (complete)=28 [16] bogie complete with bolster=14 nos [17] lower spring beam nac=nil [18] lower spring beam ac=28 nos [19] anchor link complete=28 nos [20] brake cylinder=28 nos [21] brake block adjuster=112 nos [22] pull rod rfc drg. no. cc-32260=28 nos [23] buffer casing=28 nos [24] buffer plunger 460mm=28 nos [25] draw hook (forged)=14 nos [26] draw bar and castle nut=28 nos [27] screw coupling assembly=14 nos [28] center pivot pin=14 nos [29] draft key=14 nos [30] distributor valve=7 nos [31] auxiliary reservoir=nil [32] buffer spring parting plate=140 nos reclaim items (electric) [1] 50 kva transformer=7 nos [2] battery charger=7 nos [3] ceiling light=102 nos [4] bell push 24 w=28 nos [5] call bell= 28 nos [6] baracket decorative light= 110 nos [7] geyser= 19 nos [8] exhaust fan= 42 nos [9] 120 ah 6 volt battery= 28 nos [10] freeze= 05 nos . cutting allowed. (i) the excluded components will be deposited with railway in good condition. the purchaser will be responsible for any damage/ broken/ cut on excluded items. (ii)the fdp will start from the date of grounding of these coaches at bandanwara yard. contractor has to clear the track in and between two feet apart both side from railway track, all the rubbish should be disposed off outside the railway boundary at their own cost. purchasers are advised to inspect the condemned "heritage palace on wheel {hpow (bg)} coaches and material prior to bidding. no representation shall be entertained after sale regarding material. custodian: sse c&w md. location: the present location of the condemned coaches rake is at budha pushkar station. after the sale, the lot will be grounded and handed over for cutting and delivery at bandanwara yard.

CTN :45173970

19 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/32/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) nr 75039288941 bobsnm1 (nlb) 2) special repair 75069295384 bobsnm1 (nlb) 3) se 75079260099 bobsnm1 (nlb) 4) nr 75039187008 bobsnm1 (nlb) 5) se 75079216690 bobsnm1 (nlb) 6) cr 75019260042 bobsnm1 (nlb) 7) se 75079316581 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 14 nos. nlb trolleys against special repairl. no. 01 to 07. ii) wagons special repairl no 01 to 07 to be sold without 28 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

Central Government/Public Sector

CTN :45145870

19 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ferrous cast steel consisting of buffer, buffer socket, buffer plunger, axle box-housing, axle cover, coupler body & its loose parts, knucle, pivot top& bottom, wide &narrow jaw - adopter, rear & inner cover, anti roll bar with - c.i, screw coupling, pin, various types of shaft- with or without bearing, bearing coller &cone, roller- cartridge bearing, supporting-device, spring leaf, small lever & pull-rod,hanger bracket,control- arm link,anchrage lock, roller/balls of bearing, motor suspension unit tube, cuppler body with - balancing draft gear with e.m pad(bog),draft- gear pad, gear off shorts, cut pcs of wheel- disc, tyre & axle, lower spring beam arrangement- seat, buffer complet,ingot/bilet,counter weigt, track machine parts such that link,chain, guide- rod,plate, etc& other various cast steel items- released from loco, carriage,trd,tmc,sig.electric- of short & sizes with c.i, steel & neg. n.f. - attachment if any. note :- 1.- loading by purchaser 2.- delivery not allowed againast part payment. 3. cutting not allowed. location: -lying bin no. -a-02 near line no.-10

Central Government/Public Sector

CTN :45145857

19 May, 2026 NA

Harnaut - Bihar

Tender For auction sale of depot ferrous scrap - scrap steel casting ( drag boxes centre's castings stretcher casting pivot cbc components, knuckles axle boxes & buffer cases, rubbing blocks etc [our offer- scrap manual uncoupling device, spring loaded supporting device, knuckle, lock, double rotary lock lift assembly, wedge, knuckle pin, front & rear carrier plate, coupler head for muff coupling, restrictor, bdg with coupler head, bracket for muff coupling, scrap face plate for buffer plunger, buffer plunger with and without face plate & spindle, casing, destruction tube, spindle, bent link, screw, draw hook, screw coupling pin, straight link, draft key, draw bar & castle nut, rest beam, draft yoke, centre pivot pin, draw gear pin, end washer, cut rivet, parting plate, nut & bolt etc. ] i lot no.ea982605009 & ea982605011 location-near west & south side of hrs shop floor

Central Government/Public Sector

CTN :45135279

22 May, 2026 NA

Jabalpur - Madhya Pradesh

Tender For auction sale of depot ferrous scrap - scrap ms consisting of heavy melting pins, nut, bolt, rivet, washer, cotter, split pins, stud is badly corroded, channels, angles, door lock pin/bracket, gravity cotter, door hinge, porter handle, door rester, staples, foot step, cbc rest plate/wpt, sf key, shoe key, h/bk, push cock, piston rods, release valves, front follower, wedge block, adaptor, locking piece, sandwich plates, sb housing, pivot pieces, bearing pieces, thrower, bk. shoe, wedge blocl, floating lever side bear etc. released from boxn & boxn hl mbs wagons. weight= 60 mts. for custodian information ss-11 no. jbp/nkj/c and w/ms 03/26/68 dt. 10.03.2026. ds-8 note no. 141994 dt. 13.04.2026. mode of delivery by actual weight only.

Central Government/Public Sector

CTN :45135276

18 May, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of depot ferrous scrap - scrap bogie ferrous consist parts of bogie and coaches , channels, draft links, collars, angles ,sleeves, hanger top block, equalizing stay , bolster hanger, silent block, centre pivot pin, anchor link, adjuster , yoke bracket ,safety rope, brake shoe head, safety strap, brackets, protective tube, strips, covers nuts, bolts, rivets, keys, cotters, pins, and plates with or without -grease , oil & attachment of bush, hanger lever, brake adjusting head, knuckle, floating lever, loose parts of ctrb bearing etc. with or without minor wooden/ss/rubber/non-ferrous attachments.s.b.lot no.bpl/ crw s/ 26 -27 /bogie ferrous/07/0020 note: delivery will be made on actual weighment basis.

Central Government/Public Sector

CTN :45134659

19 May, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - lot consisting of condemned various rejected ms spares items with or without ss or ci attachments is as below and as available in the location. delivery will be given as is where is basis. approximate weighment of above items is 932kgs. note: purchaser can inspect the materials thoroughly before e-auction, lot will be delivered as is where is basis only. 1). 13 teeth sprocket : qty. 26 nos. wt. 4.0kg/no. total wt. 104kg. approximately. 2). 14 teeth sprocket : qty. 10 nos. wt. 3.4kg/no. total wt. 34kg. approximately. 3). 32 teeth sprocket : qty. 04 nos. wt. 11.2kg/no. total wt. 44.8kg. approximately. 4). 20 teeth sprocket : qty. 15 nos. wt. 3.9kg/no. total wt. 58.5kg. approximately. 5). plummer blocks (small) : qty. 16 nos. wt. 3.4kg/no. total wt. 54.4kg. approximately. 6).plummer blocks (big) : qty. 13 nos. wt. 6.8kg/no. total wt. 88.4kg. approximately. 7). directional control valve (small) : qty. 04 nos. wt. 3.0kg/no. total wt. 12.0kg.appr. 8). directional control valve (big) : qty. 02 nos. wt. 10.8kg/no. total wt. 21.6.0kg.appr. 9). safety fire ball valve : qty. 01 no. wt. 7.0kg/no. total wt. 7.0kg.approximately 10).load hook (small) : qty. 06 nos. wt. 17.0kg/no. total wt. 102.0kg.approximately. 11).gear coupling : qty. 04 nos. wt. 10.5kg/no. total wt. 42.0kg.approximately. 12).load hook (big) : qty. 02 nos. wt. 80.0kg/no. total wt. 160.0kg.approximately. 13).wear plate (broken) : qty. 02 nos. wt. 18.75.0kg/no. total wt. 37.5kg.approximately. 14).filter cell : qty. 01 nos. wt. 21.0kg/no. total wt. 21.0kg.approximately. 15).support block : qty. 01 nos. wt. 33.6.0kg/no. total wt. 33.6kg.approximately. 16).bend saw blades : qty. 04 nos. wt. 0.9kg/no. total wt. 3.6kg.approximately. 17).ball screw rod : qty. 01 nos. wt. 3.2kg/no. total wt. 3.2kg.approximately. 18).pulley : qty. 02 nos. wt. 17kg/no. total wt. 34kg.approximately. 19).pivot pin nut : qty. 03 nos. wt. 11.8kg/no. total wt. 35.4kg.approximately. 20).dia pulley assembly : qty. 07 nos. wt. 5.0kg/no. total wt. 35kg.approximately. total 20 items approximate weight : 932.0kgs. delivery unit : in number.

Central Government/Public Sector

CTN :45134613

20 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - condemned scrap containing cbc parts, draft gear, coupler, yoke, yoke pin, knuckle, knuckle pin, cbc lock, lock lifter, bearing piece, adaptor, top pivot, bottom pivot, nut bolt pieces etc.

CTN :45126258

22 May, 2026 NA

Asansol - West Bengal

Tender For auction sale of others - scrap cast steel (scrap draw gear component and other wagon components) consisting of scrap 1) coupler body=30 nos. , 2) scrap knuckle=200 nos. , 3) scrap adopter =500 nos. , 4) scrap bogie center pivot top and bottom=80 nos. , 5) yoke pin=85 nos. , 6) yoke= 12 nos. , 7) other scrap draw gear and wagon components.

Central Government/Public Sector

CTN :45118058

15 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of main pin for knuckle (knuckle pivot pin) as per escorts part no. sk-575 for aar 'h' type cbc with balance draft gear to rdso spec. no. rdso/2011/cg-03 rev. 01. [ warranty period: 48 months after the date of delivery ]

Knuckle Pivot Pin Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors