Latest knuckle plate Tenders | Government knuckle plate Tenders

Central Government/Public Sector

CTN :45644581

07 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of ss sheet sus 301l-dlt - dull finish of size 2 mm x 1250/1500 mm x 2150 mm to jis g 4305 standard. special condition : i) the sheets/plates shall be supplied in bundles with double layer of water proof paper & a bio degradeable plastic sheet of suitable thickness and metal protection in edges. all the sheets up to 2mm thickness shall be protected against corrosion and rust by coating corrosion preventive fluid, soft film, solvent deposited, water displacing to is: 1154. ii)all bundles shall have a minimum of 2 hoopsup to 1.2 meter in length and one extra hoop for every additional meter. the bundles shall also be provided with skid (wooden packing under neath) to facilitate handling.iii) optimum weight of the bundle should be 2mt+-10%. mechanical damange & corrosionduring transit if any shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45438686

07 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply of ss sheet sus 301l-dlt - dull finish of size 2 mm x 1250/1500 mm x 2150 mm to jis g 4305 standard. special condition : i) the sheets/plates shall be supplied in bundles with double layer of water proof paper & a bio degradeable plastic sheet of suitable thickness and metal protection in edges. all the sheets up to 2mm thickness shall be protected against corrosion and rust by coating corrosion preventive fluid, soft film, solvent deposited, water displacing to is: 1154. ii)all bundles shall have a minimum of 2 hoopsup to 1.2 meter in length and one extra hoop for every additional meter. the bundles shall also be provided with skid (wooden packing under neath) to facilitate handling.iii) optimum weight of the bundle should be 2mt+-10%. mechanical damange & corrosionduring transit if any shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

corporations/Associations/Others

CTN :45633854

06 Jul, 2026 1.05 Lacs

Tiruvannamalai - Tamil Nadu

Tender For tiruvannamalai city municipal corporation supply and delivery of kitchen equipments for amma unavagam muthuvinayagar kovil street in tiruvannamalai city municipal corporation - idli steamer , grinder , table plastic bush , aluminium food container with lid (10 kg) , sambar container with lid (10 kg) , sambar valli , rice washing basket , tumbler , water jug 2, bashion , spoon , mobbu, gas stove 1, hot box , cooker (10 litres), mixer heavy duty 1 hp, 3 jar, aluminium kadai, vessel , ss rice & sambar /curd mixed vessels, gas hose , idly spoon , ss sambar karandi, big size, ss plates, round, 3 compartments

CTN :45640502

26 Jun, 2026 5.13 Lacs

Udhampur - Jammu And Kashmir

Tender For supply of writing pens (q4) , binder clips (v3) conforming to is 8231 (q4) , pressure sensitive adhesive tapes with plastic base (v4) conforming to is 13262 (q4) , correspondence envelopes (v3) (q4) , file/folder (v3) (q4) , glue stick (v3) (q4) , markers and highlighters (q4) , self adhesive flags (v3) (q4) , paper clips (v2) conforming to is 5650 (q4) , paper pins (v2) conforming to is 5653 (q4) , register (v2) (q4) , sticky notes (v2) (q4) , staple pins/staples(v3) (q4) , tags for files (v3) conforming to is 8499 (q4) , staplers(v3) (q4) , electronic calculator (v2) (q4) , stationery holder/pen stand(v3) (q4) , glass tableware (v2) conforming to is 1961 (q4) , desk pads - writing (v2) (q4) , pin cushions (q4) , metric scale (v2) conforming to is 1480 (q4) , pads for rubber stamps (v2) conforming to is 4747 (q4) , poker or awl as per is 10375 (q4) , tea set (v2) (q4) , dining plates (v3) (q4) , plain copier paper (v3) isi marked to is 14490 (q4)

CTN :45647889

02 Jul, 2026 NA

Barmer - Rajasthan

Tender For supply of bathroom cleaner 1 ltr , phynyl 1 ltr , nepthalene balls white 100 gms , room freshner , mosquito machine with liquid , mosquito liquid , duster cloth good quality , colin 500 ml , toilet cleaner , toilet brush good quality , floor cleaner , plastic wiper good quality , mosquito insects killer spray , cockroach killer spray , handwash liquid , disposable uranal mat , plastic dustbin , bucket , dish wash gel , dish wash scruber , tiliwali jhaddu , aa size pencil cell durocell , aaa size pencil cell , mug , pocha cloth , garden water pipe , bathroom freshner , wasing powder 1 kg , godrej lock 7 lever , casseroll as per sample , vip ceramic full plates , coconut stick long handle wet and dry broom , broom soft phool jharu with plastic handle , mob stick with long handle , tray wooden medium as per sample , tray wooden large as per sample , white plastic tray medium large , coaster wooden for officers , extension cord 5 mtr , tea flask 1 ltr , water camper 10 ltr , vip ceramic qtr plate set for tea as per sample , white tea cup set of 06 as per sample , stamp pad large , stamp pad medium , board marker pen , envelope 11 x 05 inner laminated with cloth , envelope 16 x 12 inner laminated with cloth , tapes 3 transperant , sutli , fevi stick medium , fevi stick large , fevicol 500 gm , dust pan , t pin * /bid number : gem/2026/b/7659269 + /dated: 22-06-2026 ' ' / bid document 1 / 38

CTN :45650773

02 Jul, 2026 10.00 Lacs

Leh - Jammu And Kashmir

Tender For supply of knitting machine , central heating system for building , 10 kva solar powered backup system , coffee machine and oven , 5 seater sofa set with centre table , red plastic chairs , plates , bowls , casserole , tea cup with saucers , pressure cooker 5 litre , thermos 2 litre

CTN :45630032

03 Jul, 2026 NA

Multi City - Andhra Pradesh

Tender For supply of provisions - acid, astagandham, atukulu, badam, basion, black pepper, blades half blade with seal, bleaching powder, baking soda, brasso liquid, bombay brroms, bombay rawa, borugulu, buffe plates without plastic coating, buckets 20 ltrs, bukka, carry bags, coffee powder, cotton, chairs neelkamal, chana, chana dall, chilli powder, coconut brooms, coconut powder, dabur amla, dalda, dasangam, dalchini patta, dettol, dhaniya, dhaniya powder, dhoop sticks powder, doppalu, dry chillies, dry coconut, dustbin with lid 60 ltrs, elaichi, gandakachuralu, gorojanam, gulal, haldi powder, haldi whole, hand glouses, hing powder, homam samidhalu, homam powder, honey, idly rawa, jaggery, jajikaya, japatri, jugs bathing, jugs drinking water, kabuli chana, karpooram, kash kash, khaju, kharjoor, kissmiss, kumkuma, kumkum puvvu, kesari colour 10 gms, lavang, laddu box small 2 laddus, laddu trays, lobiya, lemon powder, maida, match boxes small, mandapasupu, methi, milk powder, milky covers 5x6, milky covers 6x9, moong, mops, moong dall, mysakshi, navadhanyalu, papad, pachakarpooram, peetambari 150gms, phenyle, palli, purnahuti set, putana dall, pulihora trays, rai, raw salt, rice, rice atta, rin soaps, rose water, rasam powder, sambar powder, sabeena, saagu biyyam, sambrani, salt powder, sandal powder, scrubbers, semiya roasted, sonti, soap oil, s f oil, sindhuram, shazeera, small misri, sugar, suthli, surf xl, swathi set, tamarind, tea glasses paper, tea powder, thread kgs, tiffin plates, till, till oil, toor dall, urad dall, uddalu, urad dall gundu, vakkalu, varipelalu, vattivelu, vibuthi undalu, water glasses paper, wheat atta aashirwad, wheat rawa, white cloth, white rai, wipers, disposable spoons round wooden size 6 inches, vattulu, vistarakulu, agarbathi, nirma surf

CTN :45627779

29 Jun, 2026 NA

Palakkad - Kerala

Tender For material procurement - material work, stone aggregate(single size): 40+b14:b93 mm nominal size, stone aggregate(single size):20 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), sundries, wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia, twisted steel/deformed bars, stone aggregate(single size): 10 mm nominal size, stone for masonry work, solid blocks of size 30x20x20cm, wall form panel 1250x450xmm, corner angle 45x45x5 mm 2.50 long, column clamp 450x1070 mm, prop 2 m (2-3.5m), structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), second class kail wood in planks, second class kail wood in scantling, hollock ballies 125 mm diameter, adjustable span eso+si (2.35-3.40), solid blocks of size 30x20x15cm, mild steel tubes electric resistant or induction butt welded, mild steel round bar 12 mm dia and below, flats up to 10 mm in thickness, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, factory made glass reinforced plastic door frame 90x45 mm i/c carriage, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, powder coated m.s. butt hinges 100 mm x58 mm x 1.9 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), pvc pipe 110 mm outer dia 6kgf/cm2, pvc pipe 15 mm outer dia 10kgf/cm2, pvc pipe 32 mm outer dia. 10kgf/cm2, pvc pipe 40 mm outer dia. 10kgf/cm2, pvc pipe 63 mm outer dia . 6kgf/cm2, pvc vent cowl 63 mm dia, pvc vent cowl 110 mm dia, brass bib-cock-15 mm dia, pvc elbow 63 mm dia, pvc 45 degree elbow 63 mm dia, pvc door elbow 63 mm dia, pvc bend 63 mm dia, pvc tee 63x63x63 mm dia, pvc socket/coupling 63 mm dia, pvc elbow 110 mm dia, pvc 45 degree elbow 110 mm dia, pvc door elbow 110 mm dia, pvc bend 110 mm dia, pvc tee 110x110x110mm dia, pvc socket/coupling 110 mm dia, pvc pipe 25 mm outer dia . 12 kgf/cm2, vitreous china orrisa type w.c. pan size 580 mm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, black plastic seat (soild) with lid c.p.brass hinges and rubber buffers, vitreous china pedestal type wate closet, vitreous china flat back wash basin 550x400 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, polyethylene water storage tank with cover and suitable locking arrangemnet, fine sand (zone iv), vitrified floor tile 60x60 cm, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., multi surface paint, special primer (c.w), black japan, synthetic enamel paint in black or chocolate shade, mild steel plates, g.i. pipes 40 mm dia, mild steel round bar above 12 mm dia, welding by electric plant, stainless steel (grade - 304) hollow section round/square tubes, stainless steel bolts /square bar and plates

Central Government/Public Sector

CTN :45633351

29 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot non ferrous scrap - scrap and unserviceable condemned various types of mix aluminium items such as aluminium spares of tl/ac coaches equipment like aluminium casting coupler, alluminium pipes, alluminium tube light parts ,engine magnet defective,door hings,air filter,air compressor parts, air inlet cover, aluminium bare wire ,alluminium ladder ,dv parts,dm plate parts ,duplex valve,door stoppers, aluminium strip sslv body, ,name plate,blower fan blade air duct cover various types of casing , horn, aluminium window frame ,axial fan , fan blade ,plates aluminium safety strap,ivc body,ivc cover, head light glass frame, ocb fan, mvrf fan, mvsi fan, compressor piston ,tension fitting , suspension fitting vibration jumper and other miscellenous aluminium items in broken and dismenetled condition of sort and sizes with or without m.s.,plastic,rubber,cotton wool,glass etc attachment. (qty approx)

Central Government/Public Sector

CTN :45363602

26 Jun, 2026 42.00 Lacs

Vellore - Tamil Nadu

Tender For corrigendum : repair replacement of internal wiring point wiring and sub main wiring including connected items at zone b otm and md accn at ins rajali under ge m arakkonam - taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floors, etc. all as specified and as directed., material and labour point wiring with 1.5 sqmm single core pvc insulated frls unsheathed multi stranded copper conductor wire drawn into existing concealed conduit including provision of 1.5 sqmm single core pvc insulated frls unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following point wiring :- make of cable : plaza/polycab/finolex/ havells, one light/ fan/ exhaust fan/ buzzer point controlled by one switch., one 3 pin socket outlet 6 amps, independent board with cables 1.5 sqmm size., one 3 pin socket outlet 6 amps,same board with cables 1.5 sqmm size., one light point controlled by two 2- way switches, with cable 1.5 sqmm size., all as per item ser no-2 above here in before but one 3 pin socket outlet 6/16 amps, indipendent board with cables 4.0 sqmm size.make :- polycab/finolex/plaza/havells, material and labour point wiring with 1.5 sqmm single core pvc insulated frls unsheathed multi stranded copper conductor drawn into pvc conduit and casing & caping fixed on wall/roof/ceiling including wall cutting etc of size not less than 20 mm dia including provision of 1.5 sqmm single core pvc insulated frls unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following :- make for pvc casing & caping: sudhakar / avon plast /plaza , make for copper cable: finolex/polycab / plaza., one light point controlled by one switch., one 3 pin socket outlet 6 amps, indipendent board with cables 1.5 sqmm size., all as per item ser no-4 above here in before but one 3 pin socket outlet 6/16 amps, indipendent board with cables 4.0 sqmm size. make :- polycab/finolex/plaza, m&l for sub main wiring for phase and neutral with pvc frls insulated unsheathed multi stranded along with earth wire frls pvc insulted copper conductor, single core cable in and including surface/concealed /pvc conduit appropriate size including cutting chases on brick walls concrete if required/ necessary surfaces not exc 10cm girth and making good in cement mortar (1:3) the existing surface after carryiing out the concealed wiring including necessary finishesas specified for the following sizes. make for copper cables: finolex/polycab / plaza/ havells. make of pvc conduit: sudhakar/finolex/avon plast., 2x 1.5 sqmm and 1x 1.5 sqmm as earth wire, 2x 4.0 sqmm and 1x 4.0 sqmm as earth wire, 2x 6.0 sqmm and 1x 6.0 sqmm as earth wire, 2x 10.0 sqmm and 1x 10.0 sqmm as earth wire, 4x 10.0 sqmm and 2x 10.0 sqmm as earth wire, 4x 16.0 sqmm and 2x 16.0 sqmm as earth wire, taking down existing rusted switch board sunken box from site including removing fixtures and fittings such as switch, socket fan regulator complete, removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces necessary plaster, white wash matches with existing colour of wall, floors, etc. all as specified and as directed., supply and fixing in repair of gi metal flush box suitable for mounting moduler plate of following modules:-, 1 or 2 module, 3 module, 4 module, 6 module, 8 module, 12 module, supply and fixing in repair of combined both frame and cover plates fixing on mounting boxes for followin

Knuckle Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector