Latest knuckle thrower Tenders | Government knuckle thrower Tenders

State Government

CTN :45231232

11 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For corrigendum : supply and execution items for reliability improvement of signalling inst. section of sr. dste/1/lko of lucknow div. nr. - excavating and refilling of trench to the level of ground with rammed earth asper drg. no.(nr/s&t/con/1.1/97a) so as not to form a drain 0.3 mtrs wide & 1mtr deep on both side of the station along side the track. it shall confirm to the safe distance as per signalling and cable plan in all type of soil, it also includes clearence of roots of trees and bushes., excavating and refilling of trench 0.3 mtrs wide & 0.8 mtr deep on pitced/stone/bricks paved surface, road/crossing/platform etc. and restoration of surafce to original condition., laying of signalling/telecom/power cables of different sizes as per attached guidelines (drg. no.(nr/s&t/con/1.1/97a) or latest on signalling cable laying and as per cable route plan approved by railways through trenches, rcc pipe, dwc pipe, gi pipe etc and meggering of cable before and after its laying of all type of outdoor cables. contractor have to transport cable from any store of lko division to site carefully. meggering to be done for each drum separately. meggering sheets to be supplied and filled up by contractor and submitted to railways, as per instructions by consignee., supply and laying of 2nd class bricks in the trench and laying as per drg. no. (nr/s&t/con./1.1/97a) or latest and as per instruction of the site engineer., boring and trenchless cabling along with supply and insertion of hdpe/dwc self lubricated pipes as per rdso spec no. rdso/spn/204/2011 ver 1.1 or latest of 120mm nominal dia in the bore at the depth of 1.4 meter to 2.1 meter from formation level (level of earth below ballast) as per drawing and as directed by engineer incharge by trenchless technology for laying of signalling /telecom/power cable under track /culvert etc. cable laying covered separately. inspection-consignee for supply of dwc/hdpe pipe. the following required coupling arrangement should also be supplied: 1. suitable snap fit couplers withrubber o ring, 2. spacers, 3. tees. 4. bend. 5. end cap(1 no. =6mtr ,straigh tpipe). (a) the cost shall include horizontal boring through any intermediate obstruction, either natural or man made or any boundary etc. (b) the rate is inclusive of all the materials equipment and labour required for during trenchless horizontal boring under the railway track. nothing extra shall be admissible on any account than the rate quoted above. (c) the pipeis to be laid underrailway track/road /culvert. all necessary arrangement are to be provideand all precautions are to be end is not deviated from the horizontal level line by more than 250mm in horizontal and vertical direction. (d) the rate shall be inclusive of direction and protection of underground utilities encountered during boring. (e) the payment for boring shall be made only when dwc/hdpe pipe are laid in the bore., concreting unschduled items in concrete of 1:3:6 ratio in cement, coarse sand and aggregate 25mm at different places in the yard and plastering top in fine plaster of 1:4 cement sand ratio. it also includes the excavation of earth as required at site and as per instruction of site incharge. the volume in cubic metres shall include the volume occupied by any ci foundation, trestle, ms angle or flat or gi pipe required to be embedded in the casting. cement coarse sand and aggregate 25mm are to be supplied by the contractor., earth work for excavation and refilling around location boxes and signals etc. where necessary including 50m lead and 1.5m lift. the lead is to be measured from centre of gravity of location to the centre of filling and lift from main ground level. the earth work should be well rammed including breaking of clods, levelling and dressing etc. as per instruction of engineer at site., brick work with well burnt bricks in foundations and plinths with cement and sand (ordinary) mixture of 1:4 ratio. all material is to be supplied by th

Central Government/Public Sector

CTN :45454599

29 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply of set of items for 'h' type tight lock coupler, one set consists of 05 items 05nos. (1) knuckle fas drg no. h50be (2) double rotary assembly fas drg no. h16a (3) lock fas drg no. h40ae (4) clevis fas drg no. c50690 (5) knuckle thrower , fas drg no. h30a. as per rdso drg. no. sk-dl-4801 alt-nil, confirming to rdso specification no. mp-0.41.00.05 (rev.-03) [ warranty period: 48 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45454298

02 Jul, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of set of spare parts for faiveley make high tensile tight lock aar-h type centre buffer coupler (cbc) for lhb coaches. one set consisting of six items as follows, item no.-1, cbc knuckle as ftildrg. no.d 228583-100, qty.-02 nos., item no. 02 knuckle thrower as per ftil drg. no. d 228585-100, qty.-02 nos., item no. 03 rotary lock lifter as ftil drg. no. d 228778-100,qty.-02 nos., item no. 4 knuckle pivot pin/main as ftil drg. no. d 228761-100. qty. 02 nos., item no. 05 as lock as per ftil drg.no. d-228584-100, qty.-02 nos., item no. 6 as manual uncoupling device as per ftil drg. no. 727109000, qty. -02 nos." [ warranty period: 84 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45395390

29 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For supply of set of high tensile transition cbc parts to rdso drg. no. sk.dl-3430 for bg alco. locomotive consisting of 15 items-(1). toggle to rdso drg. no. sk.dl-3430 item no.5, qty.-35 nos. (2). lock lift lever connector to rdso drg. no. sk.dl-3430 item no.6, qty.-35 nos. (3). lock lift lever hook to rdso drg. no. sk.dl-3430 item no.7, qty.-35 nos. (4). lock to rdso drg. no. sk.dl-3430 item no.8, qty.-35 nos. (5). knuckle thrower to rdso drg. no. sk.dl-3430item no.9, qty.-35 nos. (6). top lifter hole cap to rdso drg. no. sk.dl-3430 item no.11, qty.-23 nos. (7). hook for stowing chain to rdso drg. no. sk.dl-3430 item no.13, qty.-23 nos. (8). chain and hasp to rdso drg. no. sk.dl-3430 item no.14, qty.-58 nos. (9). lock retraction pin to rdso drg. no. sk.dl-3430 item no.15, qty.-58 nos. (10). lock lift lever rivet to rdso drg. no. sk.dl-3430 item no.16, qty.-58 nos. (11). lock lift rivet to rdso drg. no. sk.dl-3430 item no. 17, qty.-58 nos. (12). bracket inner to rdso drg. no. sk.dl-3430 item no. 26, qty.-58 nos. (13). bracket outer to rdso drg. no. sk.dl-3430 item no. 27, qty.-58 nos. (14). operating rod long to rdso drg. no. sk.dl-3430 item no.28, qty.-58 nos. (15). operating rod short to rdso drg. no. sk.dl-3430 item no. 29, qty.-58 nos. [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45400990

10 Jun, 2026 NA

Secunderabad - Telangana

Tender For auction sale of others - 81503-26-05-07-hyb-sc-w o p: - scrap unserviceable condemned press line web offset printing machine (one number) consisting of 4 units front and back, 3 unwinding units,1 plate folding,1 plate punching, 1 control panel,1 electrical panel,3 reel shafts, 1delivery unit without quarter folder ( not for sale=1 no. quarter folder)2 electrical motors ( 1 hp and 45 kw), chiller unit approximate weight of the machine=15mt. available under the custody of sse/general printing press/sc. location: - general printing press secunderabad. ds-8 no.081503-26-00045 dated 23-04-2026. delivery by as is where is basis by number, state telangana, pl no. 98322497 hsn code 72044100 refer to depot conditions for gstin of state railways, list of holidays and other conditions. [1]. in order to make assessment the purchaser may visit the lot location and inspect the lot and satisfy themselves before bidding [2]. post auction no representation shall be entertained. [3]. weight shown is indicative and no claim can be made for delivery in weight. [4]. gas cutting is permitted [5]. purchaser has to make his own arrangements such as tools, lifting tackles, lifting equipment such as crane, gas cutting equipment and necessary trained men for dismantling, cutting & loading [6]. the purchaser is responsible for providing adequate safety firefighting equipments on the spot at the time of cutting and delivery. [7]. the purchaser shall be liable to make good any damage loss caused to railway property during cutting and delivery.

Central Government/Public Sector

CTN :45396772

08 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For schedule-1 supply, installation, interfacing with electrics of trainset, testing and commissioning of on-board kavach equipment as per rdso spec no. rdso/spn/196/2020, ver 4.0 or latest for trainset. detailed description, scope of supply, warranty, camc and other conditions shall be followed as per "annexure-a". note: 1.the radio modems shall be delivered, installed, tested, and commissioned at zonal railways depots directly. 2,quantity required per rake : 2 sets [ warranty period: 60 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45384040

09 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132606 017 pl no 98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis), scrap of cond. & u/s. 8 wheeler , boxnhs m1, , bcn m1, bobrn m1 , boxn m1 ,wagons available on rails. 1) nfr boxnhs m1 12059609882,2) cr bcn m1 30019160198 , 3) cr bcn m1 30019160730,4) er bobrn m1 72029562814, 5) ser boxn m1 10079660845. location road no. 1 at dump yard. rc items: . 1 .coupler bodies (nt), 2 .yokes 3 .knuckles, 4.draft gears, 5.striker castings (nt), 6.centre pivots, 7. casnub bogies with all fittings, 8 . casnub bogies without all fittings, 9.break cylinder 355, 10. auxiliary reservoir 100, 11. distributer valve 12. cp pb with control reservoir 13. sab, 14) boxn doors 15. yoke pin support (1st plate), 16. safety plate with anchor plate (2n d plate), 17. yoke support plate(3rdplate), 18. yoke pin 19. draft gear follower . 20 knuckle pin. 21. knuckle thrower.22.cut of angle cock. 23. bcn swing, 24. bcn flap, 25. bronze bushes ds8 no : 0999603017 dt: 30 .05 .25. note to purchaser : before delivery of wagon cut off parts, the declared rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 56.793 mt sold on number basis only delivery in cutoff parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos

Central Government / Public Sector

CTN :45384041

09 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132606 018 pl no 98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis), scrap of cond. & u/s. 8 wheeler , boxnr , boxn m1, bcn m1, wagons available on rails. 1) cr boxn m1 10019601099 ,2) ser bcn m1 30079160169, 3) cr boxn m1 10019660942,4) scr boxnr 25099631638 , 5) cr boxn m1 10019661383 . location road no. 1 at dump yard. rc items: . 1 .coupler bodies (nt), 2 .yokes 3 .knuckles, 4.draft gears, 5.striker castings (nt), 6.centre pivots, 7. casnub bogies with all fittings, 8 . casnub bogies without all fittings, 9.break cylinder 355, 10. auxiliary reservoir 100, 11. distributer valve 12. cp pb with control reservoir 13. sab, 14) boxn doors 15. yoke pin support (1st plate), 16. safety plate with anchor plate (2n d plate), 17. yoke support plate(3rdplate), 18. yoke pin 19. draft gear follower . 20 knuckle pin. 21. knuckle thrower. 22. bcn swing, 23. bcn flap, ds8 no : 0999603018 dt: 30 .05 .25. note to purchaser : before delivery of wagon cut off parts, the declared rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 49.729 (m.s 45.397, ss-4.332) mt sold on number basis only delivery in cutoff parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos

Central Government / Public Sector

CTN :45384042

09 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132606 020 pl no 98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis), scrap of cond. & u/s. 8 wheeler , boxnr , boxn m1, boxnha m1 , wagons available on rails. 1) scr boxnha m1 10099637117 , 2) ser boxnr 25079560408 , 3) er bobrn m1 72029463111,4 ) wr boxnr 25089660303 , 5) cr boxn m1 10019660997. location road no. 1 at dump yard. rc items: . 1 .coupler bodies (nt), 2 .yokes 3 .knuckles, 4.draft gears, 5.striker castings (nt), 6.centre pivots, 7. casnub bogies with all fittings, 8. casnub bogies without all fittings, 9.break cylinder 355, 10. auxiliary reservoir 100, 11.sab 12) boxn doors 13. yoke pin support (1st plate), 14. safety plate with anchor plate (2n d plate), 15. yoke support plate(3rdplate), 16. yoke pin 17. draft gear follower . 18 knuckle pin. 19. knuckle thrower. 20.cut of angle cock.21. bronze bushes ds8 no : 0999603020 dt: 30 .05 .25. note to purchaser : before delivery of wagon cut off parts, the declared rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 46.507 (m.s 37.989, ss-8.518) mt sold on number basis only delivery in cutoff parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos

Central Government / Public Sector

CTN :45384043

09 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132606 016 pl no 98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis), scrap of cond. & u/s. 8 wheeler , boxnr , boxn m1 , wagons available on rails. 1) ser boxnr 25079662256 , 2) scr boxn m1 10099628276, 3) ser boxn m1 10079672459, 4) er boxnr 10029695224, 5) er boxn m1 10029699451. location road no. 1 at dump yard. rc items: . 1 .coupler bodies (nt), 2 .yokes 3 .knuckles, 4.draft gears, 5.striker castings (nt), 6.center pivots, 7. casnub bogies with all fittings, 8 . casnub bogies without all fittings, 9.break cylinder 355, 10. auxiliary reservoir 100, 11. distributer valve 12. cp pb with control reservoir 13. sab, 14) boxn doors 15. yoke pin support (1st plate), 16. safety plate with anchor plate (2n d plate), 17. yoke support plate(3rdplate), 18. yoke pin 19. draft gear follower . 20 knuckle pin. 21. knuckle thrower.22.cut of angle cock. ds8 no : 0999603016 dt: 30 .05 .25. note to purchaser : before delivery of wagon cut off parts, the declared rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 43.621 (m.s 34.884, ss-8.737) mt sold on number basis only delivery in cutoff parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos

Knuckle Thrower Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors