Latest knuckle Tenders | Government knuckle Tenders

Central Government / Public Sector

CTN :45167226

02 Jun, 2026 NA

Gooty - Andhra Pradesh

Tender For supply of set of e-type cbc gauge as per rdso g -76 manual consisting of 3-items:- (1) contour wornlimit gauge no. 1 as per rdso g-76 manual appendix - 3a (2) contour worn limit gauge no. 2 as per rdso g-76 manual appendix - 3b (3) knuckle stretch and nose wear gauge no. 3 as per rdso g -76 manual appendix - 3c. hardness of material- 40/45 hrc minimum. make: ganpati or equivalent. ]

Central Government / Public Sector

CTN :45173061

22 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132605 012 98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis), scrap of cond. & u/s. 8 wheeler , boxn m1. bcn m1 , bobrn m1, boxnr m2 ,wagons available on rails. 1) ser boxn m1 10079666076, 2) nr bcn m1 30039016307, 3) er bobrn m1 72029661173, 4) ser bcn m1 30079060933 , 5) scr boxnr m2 25099660287 . location road no. 2 at dump yard. rc items: . 1 .coupler bodies (nt), 2 .yokes 3 .knuckles, 4.draft gears, 5.striker castings (nt), 6.center pivots, 7. casnub bogies with all fittings, 8 . break cylinder 355, 9. auxiliary reservoir 100, 10. sab, 11) boxn doors 12. yoke pin support (1st plate), 13. safety plate with anchor plate (2n d plate), 14. yoke support plate(3rdplate), 15. yoke pin 16. draft gear follower . 17 knuckle pin. 18. knuckle thrower.19, bcn swing,20. bcn flap,21.bronze bushes, ds8 no : 0999603012 dt: 12 .05 .25. note to purchaser : before delivery of wagon cut off parts, the declared rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 51.642 (m.s 46.640, ss-5.002) mt .sold on number basis only.05nos . delivery in cutoff parts. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos

Central Government / Public Sector

CTN :45173062

22 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132605 011 pl no 98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis), scrap of cond. & u/s. 8 wheeler , m boxn, boxn m1 , wagons available on rails. 1)wr m boxn 10089160243,2) wr boxn m1 10089600282 , 3) cr m boxn 10018860343. location road no. 2 at dump yard. rc items: . 1 .coupler bodies (nt), 2 .yokes 3 .knuckles, 4.draft gears, 5.striker castings (nt), 6.centre pivots, 7. casnub bogies with all fittings, 8 . break cylinder 355, 9. auxiliary reservoir 100, 10. sab, 11) boxn doors 12. yoke pin support (1st plate), 13. safety plate with anchor plate (2n d plate), 14. yoke support plate(3rdplate), 15. yoke pin 16. draft gear follower . 17 knuckle pin. 18. knuckle thrower. ds8 no : 0999603011 dt: 12 .05 .25. note to purchaser : before delivery of wagon cut off parts, the declared rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 20.174 mt. sold on number basis only. 03 nos delivery in cutoff parts. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 03 nos

Central Government / Public Sector

CTN :45173063

22 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132605 013 pl no 98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis), scrap of cond. & u/s. 8 wheeler , boxn m1, bcn m1, boxnr . wagons available on rails. 1) nr boxn m1 10039660526 ,2) er bcn m1 30029161260 , 3) scr boxn m1 10099663765 ,4) wcr boxnr 25169515462 , 5) scr bcn m1 30099081994. location road no. 2 at dump yard. rc items: . 1 .coupler bodies (nt), 2 .yokes 3 .knuckles, 4.draft gears, 5.striker castings (nt), 6.centre pivots, 7. casnub bogies with all fittings, 8 . break cylinder 355, 9. auxiliary reservoir 100, 10. sab, 11) boxn doors 12. yoke pin support (1st plate), 13. safety plate with anchor plate (2n d plate), 14. yoke support plate(3rdplate), 15. yoke pin 16. draft gear follower . 17 knuckle pin. 18. knuckle thrower.19, bcn swing,20. bcn flap,21. distributor valve, 22. cp pb with control reservoir, 23. cut of angle cock ds8 no : 0999603013. dt: 12 .05 .25. note to purchaser : before delivery of wagon cut off parts, the declared rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 49.768 (m.s 45.290, ss-4.478)mt .sold on number basis only.05 nos delivery in cutoff parts. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos

Central Government / Public Sector

CTN :45173064

22 May, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132605 014 pl no 98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis), scrap of cond. & u/s. 8 wheeler , boxnr , bcn m1, boxnhs m1 , wagons available on rails. 1) ser boxnr 25079662317,2) cr bcn m1 30019140237, 3) wr boxnhs m1 12089601511 ,4) cr bcn m1 30019141050 , 5) scr boxnr 10099663703. location road no. 2 at dump yard. rc items: . 1 .coupler bodies (nt), 2 .yokes 3 .knuckles, 4.draft gears, 5.striker castings (nt), 6.centre pivots, 7. casnub bogies with all fittings, 8 . break cylinder 355, 9. auxiliary reservoir 100, 10. sab, 11) boxn doors 12. yoke pin support (1st plate), 13. safety plate with anchor plate (2n d plate), 14. yoke support plate(3rdplate), 15. yoke pin 16. draft gear follower . 17 knuckle pin. 18. knuckle thrower.19, bcn swing,20. bcn flap,21. distributor valve, 22. cp pb with control reservoir, 23. cut of angle cock ds8 no : 0999603014. dt: 12 .05 .25. note to purchaser : before delivery of wagon cut off parts, the declared rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 49.215(m.s 40.551, ss-8.664)mt .sold on number basis only.05 nos delivery in cutoff parts. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos

CTN :45173687

20 May, 2026 NA

Multi City - Odisha

Tender For auction sale of others - lot no.- sse/cs/2025-2026/24 srl. no. (1) desc.- housing for t/bar , qty.- 30 nos. , approx weight- 0.93 mt , srl. no. (2) desc.- axle box bearing (cru-150) , qty.- 18 nos. , approx weight- 0.45 mt , srl. no. (3) desc.- hand brake , qty.- 25 nos. , approx weight- 0.50 mt , srl. no. (4) desc.- nut& bolt , qty.- 06 mt , approx weight- 06.00 mt , srl. no. (5) desc.- damper , qty.- 18 set , approx weight- 06.66 mt , srl. no. (6) desc.- cbc yoke , qty.- 07 nos. , approx weight- 0.7 mt , srl. no. (7) desc.- coupler body , qty.- 25 nos. , approx weight- 4.375 mt , srl. no. (8) desc.- cbc knuckle , qty.- 45 nos. , approx weight- 1.575 mt , srl. no. (9) desc.- spheri block , qty.- 922 nos. , approx weight- 5.071 mt , srl. no. (10) desc.- gear case assembly , qty.- 17 nos. , approx weight- 3.23 mt , srl. no. (11) desc.- side buffer , qty.- 25 nos. , approx weight- 3.625 mt , srl. no. (12) desc.- pins & bushes , qty.- 4.2 mt , approx weight- 4.2 mt , srl. no. (13) desc.- bc cylinder , qty.- 10 nos. , approx weight- 0.49 mt , srl. no. (14) desc.- racer + abutment ring , qty.- 0.2 mt , approx weight- 0.20 mt , srl. no. (15) desc.- miscellaneous item , qty.- 07 mt , approx weight- 07.00 mt , srl. no. (16) desc.- pbu tbu item +brake hanger , qty.- 04 mt , approx weight- 04.00 mt

CTN :45173970

19 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/32/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) nr 75039288941 bobsnm1 (nlb) 2) special repair 75069295384 bobsnm1 (nlb) 3) se 75079260099 bobsnm1 (nlb) 4) nr 75039187008 bobsnm1 (nlb) 5) se 75079216690 bobsnm1 (nlb) 6) cr 75019260042 bobsnm1 (nlb) 7) se 75079316581 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 14 nos. nlb trolleys against special repairl. no. 01 to 07. ii) wagons special repairl no 01 to 07 to be sold without 28 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

Central Government/Public Sector

CTN :45174598

20 May, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - 98050126]scrap cond./released/unserviceable ms scrap such as cbc coupler bodies, angels channels, signal rods, dash pot, yokes, draft gears sets, ms sheets, winch for lc gate, lever lock, lever rods, pull rods, suspension tube, bracket cl, housing axle bearing, chequered plates, cbc operating handle, rail cutter, rel hook, anti roll bracket, dredger drum, chain, centering disc, ms liners, center pivot washer, center pivot ring, side frame key, adopter narrow jaw, anti roll bar, wear plate, adopter wide jaw, suspension rods ,equalizing stay, erc clips, rail flange, chain hook, rotary shield with bearings, sab parts, ls beam, hangers, brake levers, brake hangers, adapter broken, center pivot top, anvil, workout sab, plate screws, transformer body and its ms parts, knuckle, fabricated test rig, gear wheel, anchor link, brake beam cut parts, axle box housing, bearing plates, rivette, chair plate, ms bed plate, ms gauge tie plate, structure bar, ms tie plates, slide chaires, center pivot, tamping tools, jim crow, cribs, track machine parts, locking plate, operating handle, cbc lock, cbc yoke, lower spring sheet beam, rail tong, center beams, screw couplings, lower spring sheet beam, cut pieces of pipes, buffers, buffer plungers, buffer casings, draw gear hooks, iron rods, wire, bolt & nut and other items coming under ms scrap on as is where is condition is available under the custody of cdms 08 ward apnote: 1.pick and choose of the material are not allowed. loading to be started from one end and to be ended on other end only. (loc:bin no. 146 at scrap yard)

Central Government/Public Sector

CTN :45174700

26 May, 2026 NA

Madurai - Tamil Nadu

Tender For auction sale of pway scrap - condemned, released & un-serviceable cl.iii rail 90r-2482.59mtrs-110.830mts,rail 52kg-1150.20mtrs-59.684mts.rail 60kg-103.87mtrs-6.268mts.[total-176.782mts].location-available at km.14/400-600 ballast siding and road no. 5 lh side ohe mast no.gdn-1026/gdn-1014. not for sale:-i)2 fish plate with s bolt and nut (stock-1:- sl.no.27,stock-5:-sl.no.6 & 7. ii) 0.86,0.91,0.21rails @ stock-no:-4, iii)7.49 & 0.49 rails @ stock-no.5.iv)flange cut rails-3.97mts(3nos). v)tongue rails-5nos.vi)glued joint-11nos,vii)flange cut rails-2nos.viii)switch rails-1no.all other materials near to this lot to the treated as nfs, since yard.road approach available with mud road. note:-1].the above rails to be delivered on linear measurement basis, [2] in all cases, i.e. crane loading/ manual loading, when the length of rails exceeds 5mtrs length, the purchaser (by engaging his own labourers) are permitted to cut the rails to convenient lengths of not less than 2.5mtrs and hand over the non-ferrous and excess quantity to the custodian, [3]any other material in the lot other than the items earmarked for sale as per d.o. should be handed over to the custodian. s1539.udm lot no.089564-25-00009 dt.05.02.26.hsn code.720429.

Central Government/Public Sector

CTN :45174735

18 May, 2026 NA

Dahod - Gujarat

Tender For auction sale of depot ferrous scrap - cast steel scrap consisting of yoke, knuckle, coupler body, buffer plunger, equalizer beam, centre block, repair kit, pinion, gear cp top, cp bottam, narrow & wide jaw adaptor, draft gear with and without rubber, center pivot, axle box, lock lift assembly, cbc housing with and without rubber, block schaku coupler item, brake beam, piece of bogie frame, bhrr adopter, nut, bolt and other miscellaneous cs/ci scrap unservicible for railway use. mode of delivery by actual weight fdp-40 days. material should be loaded with one end from lot as per description.

Knuckle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors