Latest krone module Tenders | Government krone module Tenders

Central Government/Public Sector

CTN :45645918

30 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot non ferrous scrap - scrap released cut pieces of copper contact wire. all sort and size. copper 99 percent. carbon, iron and dust 01 percent. [qty on approx basis] note- delivery will be given from 1000 kgs. electronic weighing machine in new non-ferrous godown. note- actual composition of various metals in the lot may vary from the percentage described above, therefore purchase may satisfy themself in all respect about quality of lot before bidding. purchasers are also advised to read and understand the para 3 of terms & conditions governing sale of scrap material through e-auction attached under depot document. as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot.

State Government

CTN :45636157

03 Jul, 2026 NA

Karur - Tamil Nadu

Tender For annual rate contract for procurement of auto garage equipments spares- hourmeter 12v make:yenkey-electronics-615091020001, tc oil filter element - ek3246 elofic / pi 441800., master cyl. assy.(tandam)-p.no.:29066698, make:bi, wheel cylinder lh - part no. 64677953 -tvs girling, wheel cylinder kit - mi no.64967159,make: tvs-bt, universal joint kit-part.no.112007 - xlogwb/gogo / model gx 20, oil filter element for bolero jeep make: purolator - pi-170300 / pi - 530500, air pressure gauge - p. no. : 2150 make : pricol, engine oil pr. gauge ( 0-7 kg/cm2 ),make - pricol - p.no: 2017, ammeter - part.no. 4035 / 40005 make: pricol only, diaphragm p.no. : 843 310 make : tvs-wabco, spring - p. no. : m 843300 make : sundram clayton, seal assy p.no. m-841000 make: sundram clayton, elgi air horn asy.-make:elgi,model:std-p.no:s09101, unloader valve -m301910 hm - 81011976 make : s.c., radiator cap, small 7 lbs - part no.ho-103, make : hold on / sippy brass type, radiator cap - big size 69mm dia filler neck, shim for pinion nut 24v self motor 9030-896, pinion & bearing assy.24v 11 teeth - 9030-859 aa, clutch outer plate for 24v self motor 9030-951 a, clutch inner plate for 24v self motor 9030-876 b, pressure plate for clutch 24v self motor 9030-623, plunger assy for armature 24v self motor 9030-298a, field coil(main) for 24v self motor 9030-51, solenoid switch assy for 24v self motor 267-4a, field coil (aux.) for 24v self motor - 9030-52a, carbon brush for 24v self motor - 9030-644, brush carrier assy for 24v self motor - 9030-77, c.e. shield assy for 24v self motor - 9030-76, thrust washer for armature 24v self motor-9030-237, bearing bush for de shield p.no:9030-693 (:make: lucas-tvs / kirloskar/ menon), oil seal-de shield assy24v selfmotor9030-808pos3850, packing washer (namada)24v self motor 9030-1241 ( 1 packet consist of 50 nos ), field connector for solenoid 24v - 9030-932, positive connector for solenoid switch - 9030-930, moving contact for solenoid switch 24v - 9030-1190, horn assy 24 with condenser vibersonic 21 -v c/fht (make : roots ), point set-12v/ 24v roots make horn vibrosonic type, carbon brush for 8" remi coach fan (type: c.f.-20), regulator assy 24v alternator - p.no. 26938063 a, brush assy for 24v alternator 9030-340, brush box assy for 24v alternator 9030-315a, fan assy for 24v alternator 9030-683, heat sink assy (aux) 24v alternator 9030-1603b, heat sink assy.negative-24v alternator- 9030-1939, de shield for 24v alternator - 9030-1688 d, fixing screw for de shield alternator - 9030-382, wiper blade - 81001915 , battery terminal positive-brass, stp type, battery terminal negative make : shanco, stp type, regulator for 12v alternator - 26214575, bulb no 67,12 v, bulb halogen 12v-60/55w make:mico bosch no. 99510300041, pull & push switch - make : minda / hella long thread, ignition key switch - part.no. j-1019 - make : jay, starter button brass body with sealed rubber boot type - make :pricol ,part no: 3516, head light switch 24v- part.no. 6rd922504-make:pmp, head light holder - hp 1656 make: harson, head light assy. - part. no. : vsh-1431 / vsh-1432, make : vasko, 03 pin type, lucas type (02 nos. per set) ( make: anl-lux, mahindra di round: 81-5124), bulb 24 v-21w -pin type no:2441, bulb no.67, 24 v, allite p.no.t-711, bulb head light halogen 24 v 100/90 w collar type, electronic flasher unit - 24v - make: hella, copper ring terminal 50 sq.mm non insulated-7137, wire 4mm size: 32 / 0.2,max od : 1.95mm, finolex make, wires 5mm size:28/0.3, max od : 2.55mm, finolex-make, wires 6mm size:35/0.3 , max od : 2.75mm, finolex make, wires 8mm size:65/0.3, max od : 3.9mm, finolex-make, main bearing 010 u/s p.no:f0218210 make:bm copper, main bearing thrust washer(std-size) make: kir/ bm, tappet p.no: f4330022 make:al, connecting rod bearing-std size make:bimetalcopper, con. rod bearing 010 u/s, make :bm copper ., cylinder liner-hardened- 10 o/s make :liners india (1set = 6 nos), piston with pin and circlip (al - 401) make : ipl

CTN :45624287

29 Jun, 2026 2.10 Lacs

Bardhaman - West Bengal

Tender For supply and fittings of miscellaneous electrical items for surface and under ground in khottadih colliery - supply & fittings of misc. electrical items for surface & under ground in khottadih colliery. (inclusive of epf/cmpf), supply & fittings of non adhesive tape, supply & fittings of 2 cello tape, supply & fittings of 4 weir net for cable joint, supply & fittings of copper tal, supply & fittings of d contact, supply & fittings of carbon, supply & fittings of mica tube 12 , supply & fittings of mica washer 12mm, supply & fittings of jublie clamp 3 , supply & fittings of copper u clamp 12mm, total impact of gst for the purpose of ctc

CTN :45415551

25 Jun, 2026 NA

Coimbatore - Tamil Nadu

Tender For corrigendum : purchase of equipment - equipment - screen printed carbon electrodes (spce), descriptionto procure screen printed carbon electrodes compatible with sensit bt hand held & dual channel potentiostat from palmsens.technical requirements electrode configuration working electrode: carbon reference electrode: ag/agcl counter electrode: carbon dimensions: 0.8 x 4.5 cm working electrode dimensions: 7.06 mm we diameter 3 mm substrate: polyester thickness: 200 m contact pad pitch: 2.54 mm coefficient of variation (cv) (n = 9): 3 %

Central Government/Public Sector

CTN :45549455

03 Jul, 2026 NA

Palakkad - Kerala

Tender For corrigendum : cting for and on behalf of the president of india invites e-tenders against tender no j-sg-ot-12-2026-662346 closing date/time 03/07/2026 15:00 hrs. bidders will be able to submit their original/revised bids upto closingdate and time only. manual o ers are not allowed against this tender, and any such manual o er received shall beignored.1. nit headername of workaugmentation of block working arrangements by provision of solid state blockinstruments in lieu of existing fm block instruments in poy-cnv and vnb-nilsingle line block sections of palakkad division, along with associated eialterations and other signalling works at poy and cnv stations.bidding typenormal tendertender typeopenbidding systemsingle packet systemtender closing datetime03/07/2026 15:00date time of uploadingtender11/06/2026 18:42pre-bid conferencerequirednopre-bid conference datetimenot applicableadvertised value 14469883.92tendering section signalpgtbidding style[ decision at schedulelevel ]bidding unitearnest money (rs.) 289400.00validity of offer ( days) 60tender doc. cost (rs.)0.00period of completion 12 monthscontract type works - general contract category expenditurebidding start date 19/06/2026are jv allowed to bid nonumber of jv memberallowed0are consortium allowedto bidnonumber of consortiummember allowed0ranking order for bidslowest to highest expenditure typecapital (works)2. schedules.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () a-sor items1276856.85above/below/par1021330 140.00 per unit 285.86 40020.40 44.04 57645.38description:- wiring of relay inputs to wago block and wago block to datalogger. necessarywagos required is included as per schedule2021340 20.00numbers 285.86 5717.20 44.04 8235.05description:- wiring of analog voltages from ips room to datalogger. necessary wagos required isincluded as per schedule3031040 4.00numbers28118.51 112474.04 44.04 162007.61description:- supply and provision of earthing as per rdso speci cation rdso/spn/197/2008 orlatest (as per technical specification enclosed)4051160 1000.00 metre 301.05 301050.00 44.04 433632.42description:- supply of underground jelly lled 6 quad, 0.9mm dia as per spec irs:tc 30-05 withamd 5 or latest5051300 4.00numbers3962.00 15848.00 44.04 22827.46description:- supply and xing of 20 pair krone module housed in ms box and termination optical fiber cableables6051320 4.00numbers4761.16 19044.64 44.04 27431.90description:- supply and fixing of 20 pair ct box and termination of cables7051410 20.00numbers 262.65 5253.00 44.04 7566.42description:- supply of rcc cable markers (supply of rcc cable markers as per drawingno.cste/cn/ofc/1. the lettering on the cable marker shall be "sig" / "tele" / "ofc" as per theinstructions of railway representative at site.) as per drawing enclosed8051440 500.00 metre 64.10 32050.00 44.04 46164.82page 1 of 9run date/time: 11/06/2026 18:43:47palakkad division-s and t/southern rlytender documenttender no: j-sg-ot-12-2026-662346closing date/time: 03/07/2026 15:008description:- excavation of cable trench in all kinds of soil except hard rocky areas includingclearing of roots of trees, rocks, bushes etc. to a depth of 1.0 mtrs and to a width of 0.3 mtrs. (layingof cables is not included in this schedule)9051490 150.00 metre 314.41 47161.50 44.04 67931.42description:- removing/breaking of existing rcc slabs on the passenger platform, trenching to adepth of 0.6m to accommodate the additional cables, replacing the slabs removed after the cablesare laid and replastering with cement mortar, re lling the trench by ramming and consolidating it asper the instructions of railway representatives at site. (laying of cables is not included in thisschedule).10051520 36.00 metre 385.45 13876.20 44.04 19987.28description:- excavation of trench to a depth of 1 mtr. for track crossing of cables, re lling oftrench by ramming and consolidating it as per the instructions of railway representative at site afterlaying of dwc/rcc

CTN :45578376

26 Jun, 2026 NA

Poonch - Jammu And Kashmir

Tender For supply of optimux 80 km single fibre 8 port e1 4 port eathernet 1gbps 8 port dial tone , ote 20 km 1 gbps , ote 80 km 1 gbps anda telecom , krone module , isopropane 99 alcohol 1 ltr , sfp module 120 km single fiber 1 gbps , 8mp bullet camera , lc to sc 5 mtr , sc to sc 5 mtr , e2k to sc 5 mtr , sc to sc zero db optic fibre adapter connector , sc to sc 1 mtr , sc to e2k 1 mtr , ofc jointing sleeves , rj 45 surge protector , fibre stripper , tool bag , insulation tape

CTN :45448930

20 Jun, 2026 1.07 Crore

Pune - Maharashtra

Tender For corrigendum : tender for supply of desluffer double layer instillation based wound healing system size medimum12x18x1 dash 2 cm compatible with cloud base npwt triage vac machine , desluffer double layer instillation based wound healing system sizelarge 15x26x1 dash 2 cm compatible with cloud base npwt triage vac machine , cycloflo double layer hydrophobic hydrophilic instillation based wound healing system medium size size 12 point 5 x 18 x 1 dash 2cm compatible with cloud base npwt triage vac machine , cycloflo double layer hydrophobic hydrophilic instillation based wound healing system large size 15 x 26 x 1 dash 2cm compatible with cloud base npwt triage vac machine , antimicrobial silver pu foam dressing small size 7 point 5 x 10 x 3 point 3cm compatible with cloud base npwt triage vac machine , antimicrobial silver pu foam dressing medium size 12 point 5 x 18 x 3 point 3cm compatible with cloud base npwt machine compatible with triage vac machine , antimicrobial silver pu foam dressing large size 15 x 26 x 3 point 3cm compatible with cloud base npwt triage vac machine , instillation canister with gel and solution delivery system 500 ml compatible with cloud base npwt triage vac machine , dynamic incision management kit size 4 point 5cm x 20cm compatible with dynamic incision management system , dynamic incision management kit size 4 point 5cm x 25cm compatible with dynamic incision management system , dynamic incision management kit size 4 point 5cm x30cm compatible with dynamic incision management system , dynamic incision management kit size 4 point 5cm x35cm compatible with dynamic incision management system , decellularized human dermis derived from donated human skin preserved in glycerol based solution with 97 percent plus of donor dna removed and sterility assurance level of 10 point 6 allowing for rapid cellular infiltration and revascularization ready to use without rehydration tensile strength of 635 point 4 plus 199 point 9n meshed form size 3x3cm , decellularized human dermis derived from donated human skin preserved in glycerol based solution with 97 percent plus of donor dna removed and sterility assurance level of 10 point 6 allowing for rapid cellular infiltration and revascularization ready to use without rehydration tensile strength of 635 point 4 plus 199 point 9n meshed form size 4x4cm , decellularized human dermis derived from donated human skin preserved in glycerol based solution with 97 percent plus of donor dna removed and sterility assurance level of 10 point 6 allowing for rapid cellular infiltration and revascularization ready to use without rehydration tensile strength of 635 point 4 plus 199 point 9n meshed form size 4x8cm , surgeon gown primary pluse meets , hyaluronic acid dermal fillers , dermal filler gel e point g juvederm , antimicrobial sacrum five layered highly absorbent foam dressing with activated carbon and sliver content 1 point 2mg obliq cm 2 active release for 168 hrs 7 days with self adherent borders and with soft silicone wound contact layer with wound pad absorption layer made up of polyacrylate fibres polyethylene polyester fibres with acquisition and spreading layer made up of polyurethane silver foam with polyurethane backing film as water bacterial and viral barrier a protective release liner made up of polyethylene film product should be usage dash upto 7 days size dash 23x23 cm , five layered self dash adhesive absorbent sacral dressing designed for exuding wounds with soft silicone adhesive wound contact layer with wound pad absorption layer made up of polyacrylate fibres and polyester fibres wound pad acquisition layer made up of polyurethane foam and spreading layer made up of non woven viscose polyester with polyurethane backing film as water bacterial and viral barrier a protective release liner made up of polyethylene film. product should be usage upto 7 days. size 22x25 cm , self adhesive 4 layered absorbent surgical dressing with soft silicone adhesive wound c

Central Government/Public Sector

CTN :45591651

23 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot non ferrous scrap - scrap released cut pieces of copper contact wire. all sort and size. copper 99 percent. carbon, iron and dust 01 percent. [qty on approx basis] note- delivery will be given from 1000 kgs. electronic weighing machine in new non-ferrous godown. note- actual composition of various metals in the lot may vary from the percentage described above, therefore purchase may satisfy themself in all respect about quality of lot before bidding. purchasers are also advised to read and understand the para 3 of terms & conditions governing sale of scrap material through e-auction attached under depot document. as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot.

Central Government/Public Sector

CTN :45591652

23 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot non ferrous scrap - scrap released cut pieces of copper contact wire. all sort and size. copper 99 percent. carbon, iron and dust 01 percent. [qty on approx basis] note- delivery will be given from 1000 kgs. electronic weighing machine in new non-ferrous godown. note- actual composition of various metals in the lot may vary from the percentage described above, therefore purchase may satisfy themself in all respect about quality of lot before bidding. purchasers are also advised to read and understand the para 3 of terms & conditions governing sale of scrap material through e-auction attached under depot document. as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot.

Central Government/Public Sector

CTN :45591653

23 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot non ferrous scrap - scrap released cut pieces of copper contact wire. all sort and size. copper 99 percent. carbon, iron and dust 01 percent. [qty on approx basis] note- delivery will be given from 1000 kgs. electronic weighing machine in new non-ferrous godown. note- actual composition of various metals in the lot may vary from the percentage described above, therefore purchase may satisfy themself in all respect about quality of lot before bidding. purchasers are also advised to read and understand the para 3 of terms & conditions governing sale of scrap material through e-auction attached under depot document. as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot.

Krone Module Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector