Latest lab shaker Tenders | Government lab shaker Tenders

Central Government/Public Sector

CTN :45274463

05 Jun, 2026 NA

Patna - Bihar

Tender For supply of food items, green vegetables, potatoes and onions, non-vegetarian items, milk and milk products, daily use items, bedding, equipment, laundry, hair cutting, student and office stationery, lab items, sports items, utensils, electricity and water supply items and annual maintenance contract (computer, cctv camera, genset 05 kv/10kv, photocopy machine) etc

CTN :45066702

29 May, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of digital insulation resistance tester to check ir of electrical equipment . test voltages 100v/250v/500v/1000v for insulation resistance upto 5 giga ohms. ac voltage 30v-750v. display count 2000. built in lcd display, cat iii 600v safety rating. supply includes batteries, leads & user manual, nablcertified lab calibration report .tester shall be as per stan one model no. -sit 500.accepted make-stan one or fluke or similar. [ warranty period: 30 months after the date of delivery ]

CTN :45264435

04 Jun, 2026 NA

Ujjain - Madhya Pradesh

Tender For completion of networking and electrical works in it lab, rcc flooring, electrical works, equipment foundation work in old workshop refurbishment and balance boundry wall in womens iti at ujjain

CTN :45151851

28 May, 2026 1.43 Crore

Kanchipuram - Tamil Nadu

Tender For corrigendum : supply, installation, commissioning and validation of lab equipment at qc/bcg block at hll biotech limited, ivc facility, chengalpattu, tamil nadu - equipment, ph meter

CTN :45299054

12 Jun, 2026 19.65 Lacs

Jodhpur - Rajasthan

Tender For supply and installation of ict lab. equipment, furniture and electrification

CTN :45245876

03 Jun, 2026 NA

Mangalore - Karnataka

Tender For supply of lab equipment to department of biochemistry, st aloysius college, mangalore - gel doc (gel documentation system)

CTN :45249590

28 May, 2026 NA

Seoni - Madhya Pradesh

Tender For miscellaniuos item - misclanious item, dental consumable- alginate, dental consumable- amalgam squeezer, dental consumable- anesthetic spray, dental consumable- arch bar, dental consumable- articulating paper, dental consumable- base plate, dental consumable- bleaching material, dental consumable- broaches, dental consumable- calcium hydroxide paste, dental consumable- calcium hydroxide paste, dental consumable- calcium hydroxide powder, dental consumable- cold mould seal, dental consumable- composite finishing kit, dental consumable- composite material, dental consumable- copper amalgam, dental consumable- crown preparation kit, dental consumable- developer, dental consumable- devitalizer, dental consumable- diamond burs (airotor), dental consumable- diamond burs (micro motor), dental consumable- die stone (pkt of 02 kg), dental consumable- edta, dental consumable- eugenol 110ml, dental consumable- fixer, dental consumable- flowable composite, dental consumable- formcresol, dental consumable- g.p.points 15-40 , 45-80, dental consumable- g.p.points proteper, dental consumable- g.p.solvent, dental consumable- gates drill, dental consumable- glass ionomer cement, dental consumable- green stick, dental consumable- h-file, dental consumable- impression compound, dental consumable- impression material (rubber base), dental consumable- impression paste, dental consumable- k-file, dental consumable- lubricant spray, dental consumable- luting cement, dental consumable- matrix band no. 01, dental consumable- matrix band no. 08, dental consumable- matrix strips, dental consumable- mercury 225 gms, dental consumable- metal trimmer, dental consumable- modeling wax, dental consumable- niti files, dental consumable- paper points 15-40, dental consumable- peso reamer, dental consumable- plaster of paris (pkt of 03 kg), dental consumable- pluggers, dental consumable- polishing bursh, dental consumable- polishing cup, dental consumable- polishing paste, dental consumable- poly carboxylate cement, dental consumable- posterior glass ionomer cement, dental consumable- proteper, dental consumable- pumice powder, dental consumable- r.r. liquid 110ml, dental consumable- r.r. powder 110 gms (pink), dental consumable- reamers, dental consumable- root canal sealer, dental consumable- screw post metal, dental consumable- scrwe post fibre, dental consumable- silver amalgam, dental consumable- sodium hypochlorite, dental consumable- spreader, dental consumable- sticky wax, dental consumable- stone plaster (pkt of 01 kg), dental consumable- stone trimmer, dental consumable- straight carbide bur, dental consumable- suction tip, dental consumable- teeth set, dental consumable- temporary filling material, dental consumable- tooth stain remover, dental consumable- varnish, dental consumable- wire no. 21,23,25, dental consumable- x- rays film, dental consumable- x- rays film (pedo), dental consumable- zinc oxide powder, dental consumable- zinc phosphate cement, dental equipment- air motor, dental equipment- air polisher, dental equipment- airotor h/p, dental equipment- amalgamator, dental equipment- apex locator, dental equipment- autoclave (front loading), dental equipment- autoclave (top loading), dental equipment- automatic developer, dental equipment- bleaching machine, dental equipment- copmressor, dental equipment- dental chair, dental equipment- endo motor, dental equipment- glass bead sterilizer, dental equipment- intra oral camera, dental equipment- light cure, dental equipment- micro motor, dental equipment- micro motor contra h/p, dental equipment- micro motor lab., dental equipment- micro motor straight h/p, dental equipment- motorized suction, dental equipment- needle burner cum syringe cutter, dental equipment- pulp tester, dental equipment- rvg, dental equipment- spot welder, dental equipment- ultra sonic cleaner, dental equipment- ultra sonic scaler, dental equipment- ultraviolet cabinet, dental equipment- water distiller, dental equipment- x-ra

State Government

CTN :45305037

04 Jun, 2026 NA

Kurnool - Andhra Pradesh

Tender For auction sale of metallic, non-metallic - e-auction notice for disposal of unserviceable/obsolete qc lab equipment articles lying at fsd timmancherla & do kurnool

corporations/Associations/Others

CTN :45276552

01 Jun, 2026 63.50 Lacs

Jaipur - Rajasthan

Tender For supply, installation, testing and commissioning of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure a attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., single aperture, providing & fixing of wiring accessories oem fabricated f

corporations/Associations/Others

CTN :45278994

01 Jun, 2026 63.50 Lacs

Jaipur - Rajasthan

Tender For sitc of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer -sitc of elv equipment - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , single aperture, providing & fixing of wiring accessories oem fabricated following size g

Lab Shaker Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

corporations/Associations/Others

corporations/Associations/Others