Get complete information related to latest Laboratory Fermenter Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Laboratory Fermenter Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Laboratory Fermenter Tenders.
Tender For supply of multi process control trainer setup for instrumentation engineering lab under mhrd scheme - purchase of multiprocess control trainer setup for instrumentation engineering lab under mhrd scheme - multiprocess control trainer set up, multiprocess control trainer set up - specifications:- setup must contain flow, pressure, level, temperature loops also derived loops like cascade and feedforward loops. temperature loop must be independent. setups consist of a circulating closed loop water plant or circulating water system including control valve, tanks, independent pumps and necessary valves including bypass valves and rotameters. using this we can be able to do flow control loop with pid,level control loop with pid,and pressure control pid, as independent experiments.the setup must include the following:1.one linear characteristics diaphragm operated control valve with 15mm stroke 1/2-inch size, type: high-capacity globe seat leakage class (as per ansi/fci 70.2).2.measuring tank with volumetric measurement scale and 1000mm level, in of 25 ltr capacity. sump tank min of 40 ltr capacity. all tanks made of ss304, with sight glass, and finished with mat steel finish.3.2 no s smart dp transmitter for flow and level measurement with hart protocol, display and keys integrated for calibration,0-1000mmh2o measurement range,0.01% accuracy, international iso certified ce approved make,24v supply,4-20ma output, loop powered.4,1nos of magnetic flowmeter with display and keys integrated for calibration,0-2000lph measurement range, read out: 0 - 100%, 4-20ma lcd display,0.05% accuracy, international iso certified ce approved make,24v supply,4-20ma output to measure flow as a independent loop.5,. smart pressure transmitter and temperature transmitters with hart protocol, display and keys integrated for calibration, pressure transmitter 0-10bar measurement range, read out: 0 - 100%, 4-20ma lcd display,0.05% accuracy, temperature transmitter 0-250 rtd type international iso certified ce approved make,24v supply,4-20ma output, loop powered.6, pressure tank of 24 liters with necessary valves for pressure loop.7.1nos orifice plate (ss304) and assembly grade with flange 1/2-inch size for flow measurement.8.2 nos pumps 0.5hp, ss centrifugal pump, minimum 1-inch pipeline of ss or high-pressure withstanding plastic with plastic welding.9. rotameters 2nos 1 inch size flow: 200-2000 l/h,ss thread, clear acrylic type.10, plc control station with 4 analogue inputs and one analogue output with necessary digital inputs and outputs to operate all loops directly from panel side.plc must have ethernet connectivity with supported protocols profinet and modbus tcpip.11.required all pneumatic components to full fill the process loops such as fr,needle valves etc.12,i to p converter 4-20ma to 3-15psi with 1/4" process connection with proper copper copper tubing.13, loop including flow pid control, level pid control, pressure pid control, cascade control (level flow), ratio control (flow flow).14.all loops can be operated using a scada system and independent pushbutton control includes trend of all analogue signals and pid tuning. scada direct profinet connectivity to plc and computer with intel i5 processor, 8gb ddr3 ram,1tb sata hdd,licenced windows 11 professional.15, required a standalone software application that must be installed on pc in which it can used to control and monitor all the functions used in scada. the application must contain process parameter trend graph plot for to study about process loops.16.the whole system setup must be in ms powder coated standalone mobile table with lockable castor wheels. all the components used be industrial. copper tubing for air connection, pressure gauges 4inches 3nos, electrical wiring connection to be flexible for to connect field devices. panel with switches, indicator, test points with banana connectors as required, multistrand wire with proper insulated lugs, ferruling & neat wire dressing & clam
Tender For instrument spare and annual maintenance contract - circular charts:-i) cc-200 (fc-261)range 0-100, ii) 9/d/179/fc-241, range 0-600, iii) 9/d/147/s-8963, range 0-150, iv) 9/d/112/s-3452, range 0-30, disposable pen (red), temperature gauge dial size 6" (h guru) heavy duty with test certificate (mercury filed) :-i) range 0-150 c streight steam 6", ii) range- 0-150 c capillary type (3 meter) bulb length 10" copper/pvc, iii)range 0-300 c streight steam 6", iv) range 0-500 c streight steam 6", vacuum gauge dial size 6" range- 0-30 inch of hg/760 mm bottom feed connection 3/8" bsp, h guru heavy duty with test certificate., pressure gauge dial size 6" bottom feed connection size 3/8" or 1/2" bsp, h guru heavy duty with test certificate :-i) range 0-15 psi 01 kg/cm , ii) range 0-30 psi 02 kg/cm , iii) range 0-60 psi 04 kg/cm , iv) range 0-150 psi 10 kg/cm , v) range 0-300 psi 21 kg/cm , vi) range 0-1030 psi 42 kg/cm /70 kg/cm , pressure gauge, dial size 10" bottom feed connection size 1/2" bsp heavy duty with test certificate:-i) range 0-60 kg/cm h. guru with test certificate, ii) range 0-2 kg/cm2 h. guru with test certificate, pressure gauge for turbines heavy duty with test certificate:-i) 4" dial size side back connection %" bsp range 0-2 kg/cm , ii) 4" dial size side back connection %" bsp range 0-4 kg/cm , iii) 4" dial size side back connection %" bsp range 0-7 kg/cm , iv) 4" dial size side back connection %" bsp range 0-10 kg/cm , teflon coated compensating cable 2 core j type, compensating cable fg/ss 2-core k type, 4 digit digital temperature indicator j & k typ , thermocouple sensor heavy duty:-i. 12" x 8 mm j/k type, ii. 8" x 8 mm j/ k type, iii. 6" x 6 mm j/k type, oil pocket ss 12", 6 digit digital event counter, proximity switch (magnetic sensor) pnp-nc sensing 8 mm,voltage 5-35 vdc, max load 300 ma, on/off pneumatic control valve flange type size- 1" to operate at air pressure 60-80 psi suitable for 20 kg/cm line pressure, on/off solenoid valve for pneumatic valve:-a) air filter " line size female thread, b) air filter with air regulator size 4", digital temperature controller (pid) j & k type, digital tachometer range 0-10000 rpm, 96 x 96 with magnetic sensor., steam flow indicator cum totalizer, drum level controller 4-20 ma input/output model no. 5296at (massibus make), dp transmitter 4-20 ma for boiler drum level, honybell make, positioner for drum level control valve, stroke counter for molasses tank, jumbo digital display with sensor, for juice and water tank, current and previous display size 4" x 4"., ma & mv source meter for temp. indicator calibration, pressure transmiter model tsc 01, range 0 to 40 bar, output 04-20 ma, accuracy 0.25% fs, pressure transmiter model ks-e-e-e b02u-m-v, range 0 to 2 bar, output 04-20 ma, supply 9-32 vdc, port g1/4e, syphon pipe s.s. 304 :-(i) u type, (ii) q type, pressure gauge, model en837-1, ss-316, dail size 6", bottom feed connection size 1/2" bsp, heavy duty with test certificate (tempsens make) :-i) range 0-6 kg/cm , ii) range 0-10 kg/cm , iii) range 0-21 kg/cm , iv) range 0-42 kg/cm , pid controller, size 96 96, model no. dc 1040, make honey bell, pressure recorder range, h-guru make, with test certificate (heany duty) with pipe stand mounted ", socket- ", size 10" :-(i) 0-1 kg./cm2, (ii) 0-2 kg./cm2, (iii) 0-10 kg./cm2, orifice with assembly (nipple), inlet pressure 21 kg/cm , outlet pressure 21 kg/cm , inlet temp. 350 c, outlet temp. 350 c, line size 4", drum level transmitter, range 400 to 400 in h2o, (make- honey bell), steam pressure transmitter, range 14.7 to 3000 psi, (make- honey bell), hade mounted thermocouple, length 450 mm, k-type duplex type, with test certificate (heany duty), signal isolator singal input 4-20ma, double output 4-20ma, repair & calibration work with amcsuper-heated wash water temp. controlling system- 01 no., d-super heated exhaust steam temp. controlling system- 01 no., temperature control system of transit heater for c/f machin
Tender For supply of ball valve 4by2-way g1by2 pn500 , dpac-s hp pilot valve , achp prv 1by4 inch bspf 0.5-10 bar r13614 , achp 3by8 midi pressure regulator , achp 6.0 mm nrv cvh1-h6m6m , dpac-s hp cover seal 109x103.4x5.6 mm , r-cp filter element hp054-1-f , r-cp filter element hp054-1-s , achp d.p. transmitter dmt 143 , installation and repair of air dryers
Tender For corrigendum : procurement of oil module and its mandatory spares for 1x800 mw yamunanagar project - motor terminal block ac aop motor , motor terminal block for ac jop motor , motor terminal block for ac ove motor , "motor terminal block for dc eop motor (1 set = 2 nos.)" , "motor terminal block for dc jop motor (1 set = 2 nos.)" , "space heater for ac aop motor (1 set = 2 nos.)" , "space heater for ac jop motor (1 set = 2 nos.)" , "space heater for ac ove motor (if not applicable then space heater for acjop to be provided) (1 set = 2 nos.) " , "space heater for dc eop motor (1 set = 2 nos.)" , "space heater for dc jop motor (1 set = 2 nos.)" , bearings for motor for lube oil pump (aop) , bearings for motor for acjop , bearings for oil vapour exhauster motor , bearings (de and nde) for dc eop motor , bearings (de and nde) for dc liop motor , carbon brushes for dc eop motor , carbon brushes for dc jop motor , brush assemblies for dc eop motor , brush assemblies for dc jop motor , ac motor for lube oil pump (aop) , ac motor for lifting oil pump (jop) , oil vapour exhauster motor , dc eop motor , dc liop motor , lube oil tcv actuator , lt for oil module –m(850-1750 mm) , pressure switch index-d (0.5 - 10 bar) , dp transmitter lube oil filter , rtd (0 to 100°c) for oil module , level gauge for oil module , local gauges (0-10 bar) -oil module , local gauges (0-400 bar) -oil module , pressure gauge ((-)120-0 mbar) -oil module , temperature indicator (0-100 degc) , pr. transmitter range (0-250 bar)-oil mod , pr. transmitter range (0-6 bar)-oil mod , pr. transmitter range (0-(-120) mbar)-oil mod
Tender For corrigendum : proposal procurement of pressure transmitter and differential pressure transmitter with manifold through open tendering for c and i, stage 1 - procurement of pressure transmitter and differential pressure transmitter with manifold through open tendering for c&i, stage-1., pressure transmitter,range-2 -2kpa # ( pressure transmitter, range: -10 kpa to 10 kpa,mwp: atleast 10 times higher than the calibration range. rangeability /turn down ratio:100:1 or better. input power: 24 vdc (+/-10%). accuracy: +/-0.06% of span or better. response time: 110 ms or less. ), pressure transmitter,range:0-60kpa # eja-110a-ems4a-97dn ( pressure transmitter, range: 0 to 60 kpa, mwp: atleast 10 times higher than the calibration range. rangeability /turn down ratio:100:1 or better. input power: 24 vdc (+/-10%). accuracy: +/-0.06% of span or better. response time: 110 ms or less. ), pressure transmitter,eja-110a-ems4a-97dn # range:0-20kpa ( pressure transmitter, range-1 to 5 kg/cm2, mwp: atleast 10 times higher than the calibration range. rangeability /turn down ratio:100:1 or better. input power: 24 vdc (+/-10%). accuracy: +/-0.06% of span or better. response time: 110 ms or less. ), pressure transmitter,range:0 -4mpa # eja-430a-ebs4a97dn ( pressure transmitter, range: 0 to 4 mpa, mwp: 16 mpa rangeability /turn down ratio:100:1 or better. input power: 24 vdc (+/-10%). accuracy: +/-0.06% of span or better. response time: 110 ms or less. ), pressure transmitter,range:0 -10mpa # eja-430a-ebs4a97dn ( pressure transmitter, range: 0 to 10 mpa, mwp: 25 mpa rangeability /turn down ratio:100:1 or better. input power: 24 vdc (+/-10%). accuracy: +/-0.06% of span or better. response time: 110 ms or less. ), transmitter,pressure,mwp:14mpa # eja430a-ebs4a-97dz/ff1,sn:91f823712,sply:10.5~42,vdc,o/p:4-20ma dc,mwp:14 mpa ( pressure transmitter, range: -1 to 160 kg/cm2, mwp: 25 mpa rangeability /turn down ratio:100:1 or better. input power: 24 vdc (+/-10%). accuracy: +/-0.06% of span or better. response time: 110 ms or less. ), transmitter,pressure,mwp:50mpa # ejx530a-eds4n-017df,sn:91f823740,sply:10.5~42 vdc,o/p:4-20ma dc,mwp:50 mpa ( pressure transmitter, range: 0 to 25 mpa, mwp: 30 mpa rangeability /turn down ratio:100:1 or better. input power: 24 vdc (+/-10%). accuracy: +/-0.075% of span or better. response time: 110 ms or less. ), pressure transmitter,range:0-10kpa # yokogawa eja-110a-ems4a-97dn,make- yokogawa ( differential pressure transmitter, range:-10 kpa to + 10 kpa, mwp: 2 kg/cm2. rangeability /turn down ratio:100:1 or better. input power: 24 vdc (+/-10%). accuracy: +/-0.06% of span or better. response time: 135 ms or less. ), dp tx,model:ejx110a-jfs4g-912ej yokogawa range:-500 to +500mmwc, span:10 to +500 mmwc,max. static pr.:160ksc,accu:+-0.04% ( differential pressure transmitter, range: -1 to +5 kg/cm2, mwp: 25 mpa rangeability /turn down ratio:100:1 or better. input power: 24 vdc (+/-10%). accuracy: +/-0.075% of span or better. response time: 135 ms or less. ), transmitter,pressure,dp,mwp:16 mpa # eja110a-ehs4a-97dz/ffi,sn:91f823681,sply:10.5~42 vdc,o/p:4-20ma,mwp:16 mpa ( differential pressure transmitter, range: -5 to +5 kg/cm2, mwp: 25 mpa rangeability /turn down ratio:100:1 or better. input power: 24 vdc (+/-10%). accuracy: +/- 0.075% of span or better. response time: 135 ms or less. ), model:eja110a-els4a-92ea (0-1000 mm ) ( differential pressure transmitter,range: -10000 to +10000 mmwc, mwp:25 mpa rangeability /turn down ratio: 100:1 or better. input power: 24 vdc (+/-10%). accuracy: +/-0.075% of span or better. response time: 135 ms or less. )