Latest laboratory service Tenders | Government laboratory service Tenders

CTN :40090228

28 Apr, 2025 NA

Dharmapuri - Tamil Nadu

Tender For purchase of equipments for heat power engineering lab in mechanical department - purchase of equipments for heat power engineering lab in mechanical department, edu5 exhaust gas analyser trainer kit find the percentage of co,co2,o2,and amount of hc, nox using exhaust gas analyser. technical specifications input voltage : ac 230 v 5%, 50 hz 1hz output format : display pc interface: usb interface display :16x2lcd menu selection: yes temperature:+5 c-+50 c relative humidity: 5-95% noncondensing atmospheric pressure : 70kpa 106kpa hc(hexane equivalent) : 0 ppm - 20000 ppm co :0%-15% co2 : 0 % - 20 % o2 :0%-25% nox : 0 ppm - 4000 ppm output interface : display/usb net weight : 4.5 kg (approx) warm-up time : 1 min applicable vehicle : petrol, lpg, cng

State Government

CTN :39996366

06 May, 2025 3.45 Crore

Kanchrapara - West Bengal

Tender For supply, storage, installation, commissioning and trial run of electro-mechanical equipment at raw water and clear water pumping station under kanchrapara municipality. - for rwps, supply, delivery , storage, installation, testing & commissioning of vertical turbine type centrifugal pump with cashion pipe ,column assembly, discharge head, sole plate, motor stool and all other accessories all complete of 750m /hr discharge at a head of 29 mtr at duty point as per technical specification . maximum allowable speed of pump shall be 1000 rpm., supply, delivery , storage, installation, testing & commissioning of vertical, scim ,tfec, 110 kw (minimum), 415 v 10% , 50hz 05%, speed 1000 rpm (syn) , to vertical pump duty motor to match with pump at sl no- (1) complete with coupling hub and all other accessories as per specification., supply, delivery , storage and installation at site of ms pipes, specials, joints, flanges as per specification and technical offer. (for both individual pump delivery pipe and extended part of common manifold if required) ., supply, delivery and installation and commissioning of valves complete at site with fixture as per specification and technical offer & as follows :-, di butterfly valve for delivery side of pump fitted with electrical actuator suitable for local and control desk operation and display system for the individual pump delivery pipe line. (350 mm minimum))(pn 16 type), di non-return valve for individual pump delivery pipe line. (350 mm. minimum))(pn 16 type), supply, delivery at site and storage of m.s. dismantling joint assembly for the individual pump delivery pipe line as per specification (350 mm minimum)., supply, delivery ,storage and installation at site of pressure gauges complete with fittings and fixture as per specification, pressure gauge for delivery side (0 10 kg / cm2), supply, delivery ,storage and installation at site of pressure transmitter complete with fitting and fixture as per specification as follows:-, pressure transmitter for delivery side ( 0 10 kg / cm2 ), supply, delivery at site and installation of m.s. structural materials for cable tray / rack, panel installation supports, pipes & valves supports, fabricated stairs & all other fabrication work., lt panel, modification / retrofitting/expansion/addition of the existing pmcc with supply , delivery & installation of a new additional motor starter feeder at rwph in order to accomodate the extra pump-motor feeder of requisite rating not less than 110 kw .the modification/addition should match/synchonise the existing panel and should ensure smooth operation of the complete panel as a single entity and should be fit to install at the existing pump house., retrofitting of existing control desk at site with supply,wiring, installation of additional items like temparature scanner , multifunction meter , microprocessor based position indicator, digital pressure indicator,tnc switch, push button switch, indication lamps etc .as required to complete for the new pump motor set., supply ,delivery, laying, installation of power cable of adequate size from motor feeder to motor .(min. 2 run x 3core , 185 sq mm xlpe armoured al. for each feeder), supply ,delivery, laying, installation of power cable of adequate size and length from pmcc to motor space heater . (min. 3 core 2.5sq mm. armoured cu for each motor), supply ,delivery, laying, installation of power cable of adequate size and length from pmcc to valve actuator etc. elsewhere required. (min . 4 core 2.5 sq mm. armoured cu), making end termination of all the power cables as stated in sl no 11,12,13 with all necessary equipments like termination kits(dry type), lugs , glands etc , installed for the modification job., supply ,delivery, laying, installation of control cables of different size as required for the purpose and length for completing the different control connections between control desk, motor feeders , lpbs, pmcc etc.to the satisfaction o

CTN :39993528

02 May, 2025 NA

Jodhpur - Rajasthan

Tender For custom bid for services - job work for preparation of functional filler materials, surface modification and paint formulation , custom bid for services - job work for study, design evaluation and certification requirements of special coatings to be applied on skin of airborne platform-1. preparation of microwave absorbing metal flakes powder , weighing and loading of raw metal powder in attritor mill along with steel balls and its operation , high energy milling of powder along with process control agent and regular monitoring during operation , i. , ii. , iii. , iv. , v. , weighing and packaging of powder in air tight container , vi. , vii. , un loading of powder from attritor mill on to trays and drying in room temperature , separation of powder from steel balls through sieving , regular cleaning of the machine and equipments related to above job works preparation of 5 kg of metal flakes per month , 2. surface modification of metal flakes powder , i. reaction for coating of oxide material on iron metal flakes , ii. , iii. , filtration and washing of powder , drying and packing of powder , 3. formulation of radar absorbing paint , i. , ii. , iii. , iv. , cleaning of bead mill by using solvent , modification of resin system by blending of different resins , formulation of paint by using filler material as per requirement , testing of drying time, flexibility, degree of fineness for quality check , 4. preparation of test specimen , i. cleaning of test panels (aluminium, mild steel and composites) , ii. , iii. , iv. , v. , primer application, followed by surface preparation through emery paper and solvent , application of radar absorbing paint to achieve desired thickness , prepare test panels of different sizes (100 mm x 100 mm) as per requirement application of polyurethane top coat , 5. other terms and conditions: , i. , ii. , iii. , iv. , v. , payment will be made on monthly basis after completion of job based on user job completion certificate , duration of job work: two years , the service provider should have prior experience of executing technical job work contracts in any of government department of r & d in government of india. copy of relevant supply order to be enclosed with the bid. , irrelevant supply orders pertaining to civil works, construction, security, maintenance and arboriculture will not be considered. , the contract may be extended further based on satisfactory services of service provider on same terms and conditions, if required by buyer. , this job work will be carried out at defence laboratory, jodhpur. , many shay , , scope of work , job work to study, design evaluation and certification requirements of special coatings to be applied on skin of airborne platform , (1) following scope of job work will be carried out under the supervision of rcma nashik , on monthly basis at rcma nashik. , i. , ii. , literature survey about latest and advance materials and technologies in the field of radar signature suppression of airborne targets , evolving the approach and strategies for airworthiness certification of special coating. iii. scrutiny of the airworthiness certification plan (acp), system requirements, , integration, technical specification etc. , iv. verification of the characterisation mythologies of special materials. , v. , verification and validation of process control documents and various design documents. vi. verification and validation of cfd analysis of aircraft with different flight regions. , vii. verification and validation of erosion, wear and tear analysis of coated airborne target. viii. scrutiny of documentation requirements for system level coating application and , subsequently flight evaluation. , ix. , study of rcs reduction after application of coatings by using simulation and modelling through matlab software. , (2) other terms and conditions: , i. , ii. , iii. , iv. , v. , payment will be made on monthly basis after completion of job based on user job completion certificate ,

corporations/Associations/Others

CTN :39910137

05 May, 2025 75.32 Lacs

Puruliya - West Bengal

Tender For providing of custom bid for services - annual rate contract for central air conditioning system (chillers) & associated equipments installed at iph area, technical building and chp administrative building of rtps, dvc raghunathpur purulia for (02) two years

Central Government/Public Sector

CTN :39922401

28 Apr, 2025 NA

Jaipur - Rajasthan

Tender For design, manufacture, supply, installation, testing and commissioning of electric overhead tra veling crane of capacity 25/10t (refer clause 4 of section iv with heading -scope of supply) with comprehen sive preventive maintenance during warranty period (as per para 16.5 of section v) and leading parameters of eot crane as per schedule-i of annexure- technical specification appended with the tender. it also includ es spares as per schedule-iv & additional spares items viz. slings/ lifting tackles/wire rope etc. as specified in schedule-i and maintenance tools as per schedule v of technical specification appended with tender. cost of dsl & its installation and commissioning also included as per schedule-i of technical specification appended with tender. all related erection material required for inspection and commissioning of crane and connecting up to electrical equipments with cable laying and fixing accessories shall be included in the cost of basic eo t crane. ]

Central Government/Public Sector

CTN :39922410

09 May, 2025 NA

Ajmer - Rajasthan

Tender For design,supply, installation and commissioning of electrically operated vv' drive 2 track surface traverser 80-ton capacity as per specification appended with this tender. it also includes cost of installation & commissioning of dsl and support masts (as per requirement specified in schedule-i). it includes all the concomitant accessories/equipments as detailed in the specification. it shall also incl ude installation and commissioning of related equipment, training of personnel in operation and maint enance of machine and supply of technical documentation. in addition to above, it also includes cost o f preventive maintenance during 1st&2nd year of warranty period, which will be inclusive of all spares, material and labour cost. all maintenance consumables like lubricants and grease except hydraulic oil / plant coolants shall form part of the scope of the preventive maintenance during the warranty period . it shall also include spares for two years normal operation and maintenance as per clause 5 of sectio n-v (it may please be noted that these spares are over and above additional spares mentioned under schedule-i of section v of specification) and additional spares/items as specified in schedule-i of specif ication appended with this tender. ]

Central Government/Public Sector

CTN :39787815

28 Apr, 2025 NA

Ajmer - Rajasthan

Tender For design, manufacturing, supply, installation, testing, commissioning and proving of hydraulic r e-railing equipment with comprehensive preventive maintenance during warranty period as per clause 16 of section-ii of specification appended with the tender. it includes all the concomitant accessories/equipments as detailed in clause 4.2 of section-i of the specification and other concomitant accessories/ equipment, whi ch the manufacturer considers essential to make the equipment fully operational, when installed and commi ssioned. it shall also include installation and commissioning of related equipment, training of personnel in op eration and maintenance of equipment and supply of technical documentation. detailed requirement may be referred at clause 4 (scope of supply) of section-i of the specifications appended with this tender. it shall als o include spares for two years normal operation and maintenance as per clause 5 of section-ii of specificatio ns appended with this tender. bidders are instructed to quote the individual price of each of the items (in co mpulsory manner) mentioned in clause 4.2 of section-i of the specifications and attach the price break up of these items in pdf file along with submitted bid. ]

Laboratory Service Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector