Web Analytics Made Easy - StatCounter

Laboratory Table Tenders

Get complete information related to latest Laboratory Table Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Laboratory Table Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Laboratory Table Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

State Government

CTN :45449319 Due date: 03 Jul, 202603 Jul, 2026 80.56 Lacs
Tender For corrigendum : supply of providing and placing ss304 laboratory stool as per specifications mentioned at serial number 1 of the scope of work , providing and placing a medium back laboratory chair as per the specifications mentioned at serial number 2 of the scope of work , providing and placing a printer table as per the specifications mentioned at serial number 3 of the scope of work , providing and placing a wooden workstation with an overhead cabinet as per the specifications mentioned at serial number 4 of the scope of work , providing and placing ss304 laboratory work bench module as per specifications mentioned at serial number 5 of the scope of work , providing and placing ss304 laboratory work bench module as per specifications mentioned at serial number 6 of the scope of work , providing and placing ss304 laboratory work bench module as per specifications mentioned at serial number 7 of the scope of work , providing and placing ss304 laboratory work bench module as per specifications mentioned at serial number 8 of the scope of work , providing and placing ss304 laboratory work bench module as per specifications mentioned at serial number 9 of the scope of work , providing and placing ss304 laboratory work bench module as per specifications mentioned at serial number 10 of the scope of work , providing and placing ss304 laboratory work bench module as per specifications mentioned at serial number 11 of the scope of work , providing and placing mobile compactor storage system as per specifications mentioned at serial number 12 of the scope of work , providing and placing ss304 open storage rack as per specifications mentioned at serial number 13 of the scope of work , providing and placing ss304 slider storage unit as per specifications mentioned at serial number 14 of the scope of work , providing and placing ss304 laboratory work bench module as per specifications mentioned at serial number 15 of the scope of work , providing and placing ss304 laboratory table as per specifications mentioned at serial number 16 of the scope of work , providing and placing ss304 necropsy table as per specifications mentioned at serial number 17 of the scope of work , providing and placing ss304 anti vibration table as per specifications mentioned at serial number 18 of the scope of work , providing and placing ss304 laboratory work bench module as per specifications mentioned at serial number 19 of the scope of work , providing and placing ss304 anti vibration table as per specifications mentioned at serial number 20 of the scope of work , providing and placing pp tall storage unit as per specifications mentioned at serial number 21 of the scope of work , providing and placing ss304 laboratory work bench module as per specifications mentioned at serial number 22 of the scope of work , providing and placing pp tall storage unit as per specifications mentioned at serial number 23 of the scope of work , providing and placing ss304 laboratory work bench module as per specifications mentioned at serial number 24 of the scope of work

Central Government/Public Sector

CTN :45375122 Due date: 29 Jun, 202629 Jun, 2026 7.00 Lacs
Tender For corrigendum : name of work: repair/maint to various type of laboratory table, eqpuiment rack, almirah steel large/med, steel table, steel chair, misc steel furniture and painting of steel furniture bio-fuel-complex (a cell of dipas) diber haldwani.

CTN :45346276 Due date: 19 Jun, 202619 Jun, 2026 NA
Tender For corrigendum : supply of laboratory table , lab stool

CTN :44925939 Due date: 29 May, 202629 May, 2026 4.37 Crore
Tender For bid to ras supply of furnishing items : : - desk , table with side unit , office tables , library tables , teachers table , computer tables , table 3ft 2ft , principal chair , visitor s chairs , teacher chairs , computer chairs , chair , stool , lab stools , library chairs , m p hall chair , sofa set 3 1 1 , lockers , classroom almirah , office almirah , wall mounted storages , filing cabinets , display rack , bookcase , rack storage closed type , newspaper stand display stand , small rack , metal frame hard bed , modular workstations , laboratory work bench understructure shall be of , work bench storage cabinets , laboratory work bench sink unit size , laboratory tables reagent racks , work tables electrical trunking size , work tables electrical trunking 2 way lpg gas valve , one way gas valves

CTN :45332631 Due date: 10 Jun, 202610 Jun, 2026 NA
Tender For supply of ph meter , hot plate magnetic stirrer , biosafty cabinet , vertical autoclave , eppendorf reaserch plus single channel , horizonal laminar air flow , tissue culture rack , air curtain , ro distillation unit , laboratory table

Central Government/Public Sector

CTN :45264914 Due date: 30 May, 202630 May, 2026 NA
Tender For supply of 2.2 kw ac crane drive , 5.5 kw ac crane drive , 11.0 kw ac crane drive , 22.0 kw ac crane drive , 37.0 kw ac crane drive , 55.0 kw ac crane drive , 75.0 kw ac crane drive 3 phase, digital ac crane drive 2.2 kw, ac drive should be suitable for heavy duty operation of 2.2 kw. offered ac drive should be suitable for crane-hoist operation. if, separate software required for crane application, it must be clubbed with supply of material. ac input voltage: 380 to 480v ac 10%, 3 phase, 3 wire, 50 hz; mode of control: bi-directional fully controlled 3-phase ac; speed regulation: 1% of base speed; braking: suitable dynamic braking resistance and chopper unit (external or in-built); acceleration time: 0.1 to 1000s or better; deacceleration time: 0.1 to 1000s or better; overload: 150%-1min, 200%-3.0s; ambient temperature: 0 to 50 c (derating shall not occur below 50 c. in the event that derating occurs below 50 c, the supplier shall provide a higher-rated drive to match the requirement); rated current at 50 c: min. current should be 5.5 amps at 50 c; high starting torque at low speed: 200% starting torque at 0.3 hz; two analog inputs: two nos. analog inputs having signal voltages of 0 to 10 vdc or 4 to 20 ma (configurable); two analog outputs: two nos. analog outputs having signal voltages of 0 to +/-10 vdc or 4 to 20 ma (configurable); six digital inputs: pnp/npn; one relay output: with short-circuit and overload protection; two digital outputs: with short- circuit and overload protection; brake release signals: outputs braking signals based on inverter operating conditions to prevent cargo bed rollback and overrunning; load adaptive control: when the actual load level is lower than the configured load level, the system can be operated at a ratio-multiplied speed (in terms of the configured frequency), resulting in significantly better efficiency; load ) /bid number : gem/2026/b/7563714 * /dated: 20-05-2026 & & / bid document 1 / 29 frequency), resulting in significantly better efficiency; load limiter: maintains the safety and rescuability of suspended loads by stopping when excessive torque is detected and by allowing operation only in the direction opposite to that in which the excessive load was detected; cooling capacity degradation alarm: detects and displays cooling capacity drop due to cooling fin clogging caused by dust and cooling fan airflow reduction; igbt life expectancy forecasting: estimates the power cycle life expectancy of the main circuit s igbt semiconductor device temperature due to frequent acceleration and deceleration stoppages, and displays the estimate before the design life is reached; protection: it must have all standard protections like stall protection, instantaneous power failure, single phasing, over voltage, under voltage, over current, inverter overload, thermal overload etc; display console: it must have alpha numeric display console for programming of drive, fault display and operating condition; dynamic qr code: it must have dynamic qr code for trouble shooting; tuning facility: it must have auto tuning facility. this must enable perfect matching of motor coupled to load with regards to optimum acceleration time, deceleration time, speed regulation etc; drive programming software: suitable drive programming software along with necessary connecting cable and adapter for connection with laptop and drive should be provided to get online with the offered drive (laptop not in scope); automatic voltage regulation: it must have automatic voltage regulation function to maintain high starting torque even at reduced voltage; regenerative option: it must be capable of regenerative operation; communication protocol: modbus (rtu/serial) or ethernet (tcp/ip); make of drives: fuji- electric/yasakawa/schneider/abb only; suitable dynamic breaking resistance unit of 60% wattage rating of drive, however the value of resistance is to be decided by manufacturer as per their technical manual for crane-ho

CTN :45212290 Due date: 06 Jun, 202606 Jun, 2026 NA
Tender For supply of glass door almirah for keeping fine chemicals (20 swg crca/gi sheet with pu powder coated) , size: 18 , filing cupboard for reagents (20 swg crca/gi sheet with pu powder coated) , overall dimension: 900 45 , filing cupboard for records, instruments spares and manuals (20 swg crca/gi sheet with pu powder coa , laboratory table- 1 (20 swg crca/gi sheet with pu powder coated) , overall dimension: l= 6700 mm, w= 750 , laboratory table-2 (20 swg crca/gi sheet with pu powder coated) , overall dimension: l= 2650 mm, w= 900 , laboratory table-3 (20 swg crca/gi sheet with pu powder coated) , overall dimension: l= 2100 mm, w= 900 , over head wall cabinet (20 swg crca/gi sheet with pu powder coated) , overall dimension: l= 1000 mm, w , anti vibration table (20 swg crca/gi sheet with pu powder coated) , overall dimension: l= 1000 mm, w= 8 , laboratory stool with premium cushion for sitting and back support, steel base revolving , chemical reagent rack for laboratory table (20 swg crca/gi sheet with pu powder coated) , size: 1800

Central Government/Public Sector

CTN :45135748 Due date: 28 May, 202628 May, 2026 NA
Tender For scope of work (sow) as mentioned in tender and schedule of work( 26 )items as given below ,[1] dismantling of tiles in walls and floors 231.000 m2,[2] dismantling of window 140.000 m2,[3] dismantling of door 40.000 m2,[4] vinyl flooring for component lab and cor 115.000 m2,[5] vinyl wall for component lab 135.000 m2,[6] calcium silicate ceiling 110.000 m2,[7] wall & ceiling jointless coatings for co 165.000 m2,[8] aluminum door (non-sterile) 2.000 nos,[9] sealed window 20.000 m2,[10] airlock gate (18%) 2.000 nos,[11] hepa filter (18%) 7.000 nos,[12] chiller unit 2.000 nos,[13] ahu (28%) 1.000 nos,[14] ahu control panel 1.000 set,[15] aluminum powder coated grill 12.000 nos,[16] aluminum ducting 120.000 m2,[17] insulation 120.000 m2,[18] cable 35.000 m,[19] copper cable 35.000 m,[20] 4 sqmm x 4 core copper cable 30.000 m,[21] communication cable 40.000 m,[22] 12mm thick toughened double leaf glass d 3.000 ea,[23] fixed/sliding glass partition upto heigh 5.000 m2,[24] 30mm thk solid pvc flush door along with 3.500 m2,[25] modular laboratory table size(5mx1.650m 1.000 lot,[26] modular lab table size(2.55mx0.75mx0.75m 1.000 ea

CTN :44971415 Due date: 01 May, 202601 May, 2026 NA
Tender For supply of cutting plier , screw drivers set of 4 , bed switch on and off , 1 point 5 rechargeable bty cell , sony alpha ilce dash 6700m aps dash c interchangeable lens mirror less camera body plus 18 desh 135mm power zoom lens comma 26 point 0mp artificial intelligence based autofocus 4k 60p recording black

CTN :44051595 Due date: 08 Apr, 202608 Apr, 2026 NA
Tender For bid to ras supply of faculty chair , visitor chair , visitor chair without arms , office big almirah , faculty table , laboratory table , two seater computer table
 Loading, Please wait...

Connect us via What's Up