Web Analytics Made Easy - StatCounter

Labyrinth Ring Tenders

Get complete information related to latest Labyrinth Ring Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Labyrinth Ring Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Labyrinth Ring Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :45230122 Due date: 22 Jun, 202622 Jun, 2026 62.75 Lacs
Tender For corrigendum : repairing/ reconditioning/ overhauling of bfp cartridge assembly (fk6d30) with replacement of worn out parts including dynamic balancing of rotating parts - impeller wear ring eye side , impeller wear ring neck side, , balancing drum, , floating seal, , lock nut for thrust collar, , lock washer for thrust collar, , shaft keys, , balancing drum nut, , balancing drum lock washer, , impeller abutment rings, , mandatory spares of stator, , ring sections packing rings, , suction guide wear ring, , diffuser wear rings, , discharge cover bush, , mechanical seals (make : eagleburgmann/ flowserve), , thrust bearing (make: michell), , journal bearings set (make: michell), , oil guards, , o-rings set (for ring section, water jacket, seal body, interstage etc.), , fasteners (bolts, nuts, screws, studs, plugs etc.), , back up rings, , air breather with adaptor, , copper coated gasket, , optional items of rotor, , shaft with keys, , impeller 1st stage, , impellers inter stage, , oil thrower/ oil retaining ring, , thrust collar, , coupling nut, , coupling keys, , thrust collar nut, , optional items of stator, , diffuser inter stage, , end diffuser

CTN :45464118 Due date: 16 Jun, 202616 Jun, 2026 19.35 Lacs
Tender For procurement of spares for nash make vacuum pump of model no. at-2006 installed in 2x660 mw csctpp, rvunl, chhabra - first stage packing (1 set = 10 nos), second stage packing (1 set = 5 nos), first stage slinger, first stage slinger spring, second stage slinger, second stage slinger spring, lip seal, lip seal, lantern gland, first stage body gasket, floating bearing end cone gasket, fixed bearing end cone gasket, floating bearing outer cap gasket, floating bearing inner cap gasket, fixed bearing inner cap o ring, interstage check valve gasket, second stage lobe gasket, second stage cone gasket, second stage discharge manifold gasket, manifold cover gasket, floating bearing outer cap, floating bearing inner cap, fixed bearing outer cap, fixed bearing inner cap nde cap, floating bearing locknut

State Government

CTN :45197645 Due date: 10 Jun, 202610 Jun, 2026 NA
Tender For bid to ras supply of plane table complete set as per isi specification consisting of board , vernier transit theodolite as per isi specification no 2988 1965 , alidade sight vane brass 24 , clinometer compass semi compass , magnetic trough compass in wooden case 15 cm , quick setting dumpy level complete with stand , telescopic alidade in box with standard accessories , prismatic compass with ring divided in to complete with having stand ball , telescopic aluminum stand for prismatic compass , indian pattern clinometer tangent comp in case , abney level with slow motion 6 , box sextant pocket in leather case , levelling staff aluminum folding type 6 meter , floating globe dia 16 cms with led light arc base self revolving leviating , celestial star globe with earth inside basic dia 30cms , 3d globe 2 in 1 globe light off physical world light , 3d raised relief maps 75 100 cms , liquid prismatic compass ms001 liquid prismatic compass mk iiia guaranteed , weather station fully assembled and well equipped weather kit , wind speed measurement range , multifunction digital altimeter altimeter barometer compass thermometer , solar system automatic revolving with cd ge020 cyber sky cd rom program , astronomical reflector telescope 76mm objective lens dia 675 telescope , 3d self framed very superior quality fibre glass models rock cycle model , 3d self framed very superior quality fibre glass models ocean feature , anerod barometer , sprit level , pantograph 60cm in box , weather report map polyart plastic geographical astronomical charts ) /bid number : gem/2026/b/7518201 * /dated: 14-05-2026 & & / bid document 1 / 32

Central Government/Public Sector

CTN :45473059 Due date: 18 Jun, 202618 Jun, 2026 NA
Tender For supply of labyrinth ring main gear complete for wap-5 locos drive assembly as per abb drg. no. ia011-00227. [ warranty period: 72 months after the date of delivery ] ]

CTN :45474148 Due date: 16 Jun, 202616 Jun, 2026 19.35 Lacs
Tender For procurement of spares for nash make vacuum pump of model no. at-2006 installed in 2x660 mw csctpp, rvunl, chhabra- first stage packing (1set=10nos) , second stage packing (1set=5 nos), , first stage slinger, , first stage slinger spring, , second stage slinger, , second stage slinger spring, , lip seal, , lip seal, , lantern gland, , first stage body gasket, , floating bearing end cone gasket, , fixed bearing end cone gasket, , floating bearing outer cap gasket, , floating bearing inner cap gasket, , fixed bearing inner cap 'o' ring, , interstage check valve gasket, , second stage lobe gasket, , second stage cone gasket, , second stage discharge manifold gasket, , manifold cover gasket, , floating bearing outer cap, , floating bearing inner cap, , fixed bearing outer cap

corporations/Associations/Others

CTN :45443702 Due date: 10 Jun, 202610 Jun, 2026 16.65 Lacs
Tender For supply and fixing of 10hp dewatering pump sets with all accessories for ensuring rainy season 2026 at east side of bhupesh guptha nagar in circle iii area fabrication ,transportation and and supply of suitable size closed out door type panel board made of 16 swg crca sheet steel enclosure, 14 swg mounting plate for cable entry fabricated , painted with two coats of red oxide primer and two coats of grey paint, lock and key arrangements ,open door type etc., complete consisting of the following equipment with all internal wiring using finolex copper frls cables including 10hp capacity dol starters- 6no's, 40a 3p mcb's-6no's, 50a 3pole connctors-6no's, single phasing preventer -6no's, 160a mccb for incomming and including aluminium bus bar and ryb indication lamps . makes:make c&s/crompton / l&t / siemens/bch. as per directed by the departmental authorities , s & f gunmetal (gm) ball valve with ss ball and ss spindle as per is - class - i, indian make heavy type - 25 mm nb size as per directed by the departmental authorities. , supply and delivery of 12mm nylon ropes etc complete as direceted by the departmantal authorities. , supply and delivery of 150mm dai (6") pvc foot valve screw type with approved make as per directed by the departmental authorities , supply and delivery of 150mm dai ci hose coller as per directed by the departmental authorities , supply and delivery of 150mm dia (6") canoflex pipe as per directed by the departmental authorities , supply and delivery of 150mm dia (6") dai gi b class long bend with provision of 25mm nipple and bend for section side filling as per directed by the departmental authorities , supply and delivery of 150mm dia (6") dai screw type gi/ ms flanges as per directed by the departmental authorities , supply and delivery of 150mm dia (6") hose clamps as per directed by the departmental authorities , supply and delivery of 3mm/6mm rubber packing including conveyance etc., complete, but excluding taxes as per directed by the departmental authorities. , supply and delivery of bolts and nuts of various sizes with double washers including conveyance etc., complete, but excluding taxes as per directed by the departmental authorities. , supply and delivery of suitable size mesh to foot valve to avoid the floating matter etc complete as direceted by the departmantal authorities. , supply and delivery of three-phase 10hp monoblock motor pumpset having input voltage of 440v, 50hz has a maximum flow of 44 lps and head of 11 mtrs and 150mm dia suction and 150mm dia delivery of make: texmo /kirloshkar (aqua/taro) with cast iron impeller and gland packing as per directed by the departmental authorities. , supply and delivey of 150mm dia rubber washers etc., complete as per directed by the departmental authorities , supply and making end termination with heavy copper lugs (pin/ ring type) as per is specification, duly crimped with crimping tool, pvc tape etc., of size 35sq mm approved. , supply and transportation of 1.0hp (25x25mm) single phase mono block ci body motor pumpset confirms to is 9079:2002 makes: kirloskar / crompton / texmo / cri / ksb/lubi / havells hi-flow v2 / psg/ aryen varsha /falcon. , supply delivery and fixing of 10 hp motor dome for covering of motor body., including cost and conveyance of all materials etc., complete as directed by the departmental authorities. , supply of 3 core 6.0 sq mm isi marked flat copper cable of isi for submersible motors confirming to is: 694:1990. makes:finolex/ rrkabel/ polycab /havells/ kei/ gloster/ goldmedal / gm/ finecab/ million/ apar(anushakthi) as per directed by departmental authorities. , supply of 35 sq mm 3 core isi marked pvc insulated and sheathed frls/frls-h round copper cable for voltage up to 1100v as per is 694/1990. makes: fine cab/polycab and approved make.

corporations/Associations/Others

CTN :45443703 Due date: 10 Jun, 202610 Jun, 2026 16.65 Lacs
Tender For supply and fixing of 10hp dewatering pump sets with all accessories for ensuring rainy season 2026 at east side of sai ram cut prices in circle iii area- fabrication ,transportation and and supply of suitable size closed out door type panel board made of 16 swg crca sheet steel enclosure, 14 swg mounting plate for cable entry fabricated , painted with two coats of red oxide primer and two coats of grey paint, lock and key arrangements ,open door type etc., complete consisting of the following equipment with all internal wiring using finolex copper frls cables including 10hp capacity dol starters- 6no's, 40a 3p mcb's-6no's, 50a 3pole connctors-6no's, single phasing preventer -6no's, 160a mccb for incomming and including aluminium bus bar and ryb indication lamps . makes:make c&s/crompton / l&t / siemens/bch. as per directed by the departmental authorities , s & f gunmetal (gm) ball valve with ss ball and ss spindle as per is - class - i, indian make heavy type - 25 mm nb size as per directed by the departmental authorities. , supply and delivery of 12mm nylon ropes etc complete as direceted by the departmantal authorities. , supply and delivery of 150mm dai (6") pvc foot valve screw type with approved make as per directed by the departmental authorities , supply and delivery of 150mm dai ci hose coller as per directed by the departmental authorities , supply and delivery of 150mm dia (6") canoflex pipe as per directed by the departmental authorities , supply and delivery of 150mm dia (6") dai gi b class long bend with provision of 25mm nipple and bend for section side filling as per directed by the departmental authorities , supply and delivery of 150mm dia (6") dai screw type gi/ ms flanges as per directed by the departmental authorities , supply and delivery of 150mm dia (6") hose clamps as per directed by the departmental authorities , supply and delivery of 3mm/6mm rubber packing including conveyance etc., complete, but excluding taxes as per directed by the departmental authorities. , supply and delivery of bolts and nuts of various sizes with double washers including conveyance etc., complete, but excluding taxes as per directed by the departmental authorities. , supply and delivery of suitable size mesh to foot valve to avoid the floating matter etc complete as direceted by the departmantal authorities. , supply and delivery of three-phase 10hp monoblock motor pumpset having input voltage of 440v, 50hz has a maximum flow of 44 lps and head of 11 mtrs and 150mm dia suction and 150mm dia delivery of make: texmo /kirloshkar (aqua/taro) with cast iron impeller and gland packing as per directed by the departmental authorities. , supply and delivey of 150mm dia rubber washers etc., complete as per directed by the departmental authorities , supply and making end termination with heavy copper lugs (pin/ ring type) as per is specification, duly crimped with crimping tool, pvc tape etc., of size 35sq mm approved. , supply and transportation of 1.0hp (25x25mm) single phase mono block ci body motor pumpset confirms to is 9079:2002 makes: kirloskar / crompton / texmo / cri / ksb/lubi / havells hi-flow v2 / psg/ aryen varsha /falcon. , supply delivery and fixing of 10 hp motor dome for covering of motor body., including cost and conveyance of all materials etc., complete as directed by the departmental authorities. , supply of 3 core 6.0 sq mm isi marked flat copper cable of isi for submersible motors confirming to is: 694:1990. makes:finolex/ rrkabel/ polycab /havells/ kei/ gloster/ goldmedal / gm/ finecab/ million/ apar(anushakthi) as per directed by departmental authorities. , supply of 35 sq mm 3 core isi marked pvc insulated and sheathed frls/frls-h round copper cable for voltage up to 1100v as per is 694/1990. makes: fine cab/polycab and approved make.

corporations/Associations/Others

CTN :45443705 Due date: 10 Jun, 202610 Jun, 2026 16.65 Lacs
Tender For supply and fixing of 10hp dewatering pump sets with all accessories for ensuring rainy season 2026 at east side of ranadheer nagar katta in circle iii area- fabrication ,transportation and and supply of suitable size closed out door type panel board made of 16 swg crca sheet steel enclosure, 14 swg mounting plate for cable entry fabricated , painted with two coats of red oxide primer and two coats of grey paint, lock and key arrangements ,open door type etc., complete consisting of the following equipment with all internal wiring using finolex copper frls cables including 10hp capacity dol starters- 6no's, 40a 3p mcb's-6no's, 50a 3pole connctors-6no's, single phasing preventer -6no's, 160a mccb for incomming and including aluminium bus bar and ryb indication lamps . makes:make c&s/crompton / l&t / siemens/bch. as per directed by the departmental authorities , s & f gunmetal (gm) ball valve with ss ball and ss spindle as per is - class - i, indian make heavy type - 25 mm nb size as per directed by the departmental authorities. , supply and delivery of 12mm nylon ropes etc complete as direceted by the departmantal authorities. , supply and delivery of 150mm dai (6") pvc foot valve screw type with approved make as per directed by the departmental authorities , supply and delivery of 150mm dai ci hose coller as per directed by the departmental authorities , supply and delivery of 150mm dia (6") canoflex pipe as per directed by the departmental authorities , supply and delivery of 150mm dia (6") dai gi b class long bend with provision of 25mm nipple and bend for section side filling as per directed by the departmental authorities , supply and delivery of 150mm dia (6") dai screw type gi/ ms flanges as per directed by the departmental authorities , supply and delivery of 150mm dia (6") hose clamps as per directed by the departmental authorities , supply and delivery of 3mm/6mm rubber packing including conveyance etc., complete, but excluding taxes as per directed by the departmental authorities. , supply and delivery of bolts and nuts of various sizes with double washers including conveyance etc., complete, but excluding taxes as per directed by the departmental authorities. , supply and delivery of suitable size mesh to foot valve to avoid the floating matter etc complete as direceted by the departmantal authorities. , supply and delivery of three-phase 10hp monoblock motor pumpset having input voltage of 440v, 50hz has a maximum flow of 44 lps and head of 11 mtrs and 150mm dia suction and 150mm dia delivery of make: texmo /kirloshkar (aqua/taro) with cast iron impeller and gland packing as per directed by the departmental authorities. , supply and delivey of 150mm dia rubber washers etc., complete as per directed by the departmental authorities , supply and making end termination with heavy copper lugs (pin/ ring type) as per is specification, duly crimped with crimping tool, pvc tape etc., of size 35sq mm approved. , supply and transportation of 1.0hp (25x25mm) single phase mono block ci body motor pumpset confirms to is 9079:2002 makes: kirloskar / crompton / texmo / cri / ksb/lubi / havells hi-flow v2 / psg/ aryen varsha /falcon. , supply delivery and fixing of 10 hp motor dome for covering of motor body., including cost and conveyance of all materials etc., complete as directed by the departmental authorities. , supply of 3 core 6.0 sq mm isi marked flat copper cable of isi for submersible motors confirming to is: 694:1990. makes:finolex/ rrkabel/ polycab /havells/ kei/ gloster/ goldmedal / gm/ finecab/ million/ apar(anushakthi) as per directed by departmental authorities. , supply of 35 sq mm 3 core isi marked pvc insulated and sheathed frls/frls-h round copper cable for voltage up to 1100v as per is 694/1990. makes: fine cab/polycab and approved make.

corporations/Associations/Others

CTN :45443706 Due date: 10 Jun, 202610 Jun, 2026 16.65 Lacs
Tender For supply and fixing of 10hp dewatering pump sets with all accessories for ensuring rainy season 2026 at west side of ranadheer nagar katta in circle iii area-- fabrication ,transportation and and supply of suitable size closed out door type panel board made of 16 swg crca sheet steel enclosure, 14 swg mounting plate for cable entry fabricated , painted with two coats of red oxide primer and two coats of grey paint, lock and key arrangements ,open door type etc., complete consisting of the following equipment with all internal wiring using finolex copper frls cables including 10hp capacity dol starters- 6no's, 40a 3p mcb's-6no's, 50a 3pole connctors-6no's, single phasing preventer -6no's, 160a mccb for incomming and including aluminium bus bar and ryb indication lamps . makes:make c&s/crompton / l&t / siemens/bch. as per directed by the departmental authorities , s & f gunmetal (gm) ball valve with ss ball and ss spindle as per is - class - i, indian make heavy type - 25 mm nb size as per directed by the departmental authorities. , supply and delivery of 12mm nylon ropes etc complete as direceted by the departmantal authorities. , supply and delivery of 150mm dai (6") pvc foot valve screw type with approved make as per directed by the departmental authorities , supply and delivery of 150mm dai ci hose coller as per directed by the departmental authorities , supply and delivery of 150mm dia (6") canoflex pipe as per directed by the departmental authorities , supply and delivery of 150mm dia (6") dai gi b class long bend with provision of 25mm nipple and bend for section side filling as per directed by the departmental authorities , supply and delivery of 150mm dia (6") dai screw type gi/ ms flanges as per directed by the departmental authorities , supply and delivery of 150mm dia (6") hose clamps as per directed by the departmental authorities , supply and delivery of 3mm/6mm rubber packing including conveyance etc., complete, but excluding taxes as per directed by the departmental authorities. , supply and delivery of bolts and nuts of various sizes with double washers including conveyance etc., complete, but excluding taxes as per directed by the departmental authorities. , supply and delivery of suitable size mesh to foot valve to avoid the floating matter etc complete as direceted by the departmantal authorities. , supply and delivery of three-phase 10hp monoblock motor pumpset having input voltage of 440v, 50hz has a maximum flow of 44 lps and head of 11 mtrs and 150mm dia suction and 150mm dia delivery of make: texmo /kirloshkar (aqua/taro) with cast iron impeller and gland packing as per directed by the departmental authorities. , supply and delivey of 150mm dia rubber washers etc., complete as per directed by the departmental authorities , supply and making end termination with heavy copper lugs (pin/ ring type) as per is specification, duly crimped with crimping tool, pvc tape etc., of size 35sq mm approved. , supply and transportation of 1.0hp (25x25mm) single phase mono block ci body motor pumpset confirms to is 9079:2002 makes: kirloskar / crompton / texmo / cri / ksb/lubi / havells hi-flow v2 / psg/ aryen varsha /falcon. , supply delivery and fixing of 10 hp motor dome for covering of motor body., including cost and conveyance of all materials etc., complete as directed by the departmental authorities. , supply of 3 core 6.0 sq mm isi marked flat copper cable of isi for submersible motors confirming to is: 694:1990. makes:finolex/ rrkabel/ polycab /havells/ kei/ gloster/ goldmedal / gm/ finecab/ million/ apar(anushakthi) as per directed by departmental authorities. , supply of 35 sq mm 3 core isi marked pvc insulated and sheathed frls/frls-h round copper cable for voltage up to 1100v as per is 694/1990. makes: fine cab/polycab and approved make.

corporations/Associations/Others

CTN :45443708 Due date: 10 Jun, 202610 Jun, 2026 16.65 Lacs
Tender For supply and fixing of 10hp dewatering pump sets with all accessories for ensuring rainy season 2026 at north side of bhupesh guptha nagar in circle iii area-- fabrication ,transportation and and supply of suitable size closed out door type panel board made of 16 swg crca sheet steel enclosure, 14 swg mounting plate for cable entry fabricated , painted with two coats of red oxide primer and two coats of grey paint, lock and key arrangements ,open door type etc., complete consisting of the following equipment with all internal wiring using finolex copper frls cables including 10hp capacity dol starters- 6no's, 40a 3p mcb's-6no's, 50a 3pole connctors-6no's, single phasing preventer -6no's, 160a mccb for incomming and including aluminium bus bar and ryb indication lamps . makes:make c&s/crompton / l&t / siemens/bch. as per directed by the departmental authorities , s & f gunmetal (gm) ball valve with ss ball and ss spindle as per is - class - i, indian make heavy type - 25 mm nb size as per directed by the departmental authorities. , supply and delivery of 12mm nylon ropes etc complete as direceted by the departmantal authorities. , supply and delivery of 150mm dai (6") pvc foot valve screw type with approved make as per directed by the departmental authorities , supply and delivery of 150mm dai ci hose coller as per directed by the departmental authorities , supply and delivery of 150mm dia (6") canoflex pipe as per directed by the departmental authorities , supply and delivery of 150mm dia (6") dai gi b class long bend with provision of 25mm nipple and bend for section side filling as per directed by the departmental authorities , supply and delivery of 150mm dia (6") dai screw type gi/ ms flanges as per directed by the departmental authorities , supply and delivery of 150mm dia (6") hose clamps as per directed by the departmental authorities , supply and delivery of 3mm/6mm rubber packing including conveyance etc., complete, but excluding taxes as per directed by the departmental authorities. , supply and delivery of bolts and nuts of various sizes with double washers including conveyance etc., complete, but excluding taxes as per directed by the departmental authorities. , supply and delivery of suitable size mesh to foot valve to avoid the floating matter etc complete as direceted by the departmantal authorities. , supply and delivery of three-phase 10hp monoblock motor pumpset having input voltage of 440v, 50hz has a maximum flow of 44 lps and head of 11 mtrs and 150mm dia suction and 150mm dia delivery of make: texmo /kirloshkar (aqua/taro) with cast iron impeller and gland packing as per directed by the departmental authorities. , supply and delivey of 150mm dia rubber washers etc., complete as per directed by the departmental authorities , supply and making end termination with heavy copper lugs (pin/ ring type) as per is specification, duly crimped with crimping tool, pvc tape etc., of size 35sq mm approved. , supply and transportation of 1.0hp (25x25mm) single phase mono block ci body motor pumpset confirms to is 9079:2002 makes: kirloskar / crompton / texmo / cri / ksb/lubi / havells hi-flow v2 / psg/ aryen varsha /falcon. , supply delivery and fixing of 10 hp motor dome for covering of motor body., including cost and conveyance of all materials etc., complete as directed by the departmental authorities. , supply of 3 core 6.0 sq mm isi marked flat copper cable of isi for submersible motors confirming to is: 694:1990. makes:finolex/ rrkabel/ polycab /havells/ kei/ gloster/ goldmedal / gm/ finecab/ million/ apar(anushakthi) as per directed by departmental authorities. , supply of 35 sq mm 3 core isi marked pvc insulated and sheathed frls/frls-h round copper cable for voltage up to 1100v as per is 694/1990. makes: fine cab/polycab and approved make.
 Loading, Please wait...

Connect us via What's Up