Latest landfill management service Tenders | Government landfill management service Tenders

Central Government/Public Sector

CTN :45549711

06 Jul, 2026 NA

Ambala - Haryana

Tender For supply of hydraulic insulator testing jig for tensile load testing of 25 kv composite & porcelain insulators as per rdso specification no.ti/spc/ohe/instest/0090 (02/2009) rev-0 or latest [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45549479

24 Jun, 2026 NA

Moga - Punjab

Tender For supply, installation and commissioning of hydraulic testing jig with fixtures for tensile load testing of 25 kv porcelain and composite insulators as per rdso specification no.ti/spc/ohe/instest/0091(08/2024) or latest [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45421944

30 Jun, 2026 NA

Kapurthala - Punjab

Tender For corrigendum : supply of advanced bogie load testing machine.specification no.mech/ m&p/4000/gm/6 dt.04/10/2025. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45545628

06 Jul, 2026 NA

Bhusawal - Maharashtra

Tender For supply of secondary spring for wap-4 loco bogie as per drg. no.skdl-3473 alt-9. pairing of spring as per compressed height at working load with group b (one no. of metallic band only) (note: the firm should provide additional springs for destructive testing to ensure that the delivered set remains complete). [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45545795

29 Jun, 2026 NA

Multi City - Multi State

Tender For design, development, supply, installation (including civil work such as machine foundation work etc.) and commissioning of hydraulic sandwich mounting testing machine along with digital load indicator and digital length measurement device and computerized load deflection graph plotting facility. (refer technical specification attached herewith). [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45521250

29 Jun, 2026 42.81 Lacs

Jaipur - Rajasthan

Tender For nit 21 work of replacement of submersible pump sets and accessories of tubewell at various locations under uwss chomu under jen section chomu (urban) under sub div chomu in jurisdiction of executive engineer, phed district division ii, jaipur - 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.2 up to 5.5 kw (7.5 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.4 7.5 kw (10 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.6 9.3 kw (12.5 hp) & head above 120 mtr., 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply.2.18.1 above 5 hp and up to 10 hp, 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. t

Central Government/Public Sector

CTN :45546247

24 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of hydraulic insulator testing jig for tensile load testing of 25 kv composite & porcelain insulators as per rdso specification no.ti/spc/ohe/instest/0090 (02/2009) rev-0 or latest. (remark - material to be delivered to sse/ec/bpl at electrical construction depot crws/nsz, bhopal (contact person mob. 7985268249) [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45545884

16 Jun, 2026 NA

Multi City - Multi State

Tender For supply, installation, testing & commissioning of 1.8 ton split ac, single phase, 230 volt, 50 hz rated cooling capacity (min- max) 6.2 kw/3.1 kw btu capacity 21150-10580 cooling capacity at 100% load 46 degree , rated isser rate wh/wh 5.2, operating voltage range 130/285 volt, operating current 7.2 a ,air flow rate 16.8 m3/min moisture removal rate 2.3 ltr/hour, operating sound 32-48 dba, swing compressortype, refrigerant r32, dew cleaning technology tripple display(set point temp., ambient temp., compressor loading %), 3 directional air flow swing, bee star rating-5 of model no.ftkm60uv16u of make:-daikin or lg or similar [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45513751

22 Jun, 2026 99.52 Lacs

Ahmedabad - Gujarat

Tender For supply of tirfor two pint five tor one point five t , tirfor 5t or 3 t , pull lift zero point seven five t or zero point eight t , ladder trolley suitable to move on railway track , earthing discharge rod complete , aluminium straight ladder extendable type , first aid box made of gi or al sheet , stretcher two fold type , set of 4 fire buckets of 10 l capacity , portable fire extinguisher dry chemical powder , portable fire extinguisher dry chemical powder type and suitably mounted on trolley , d shackeles set of alloy steel , set of steel slings with eye on each end , stainless steel digital micro meter , bench vice 6 inch suitably mounted on steel table , canvass tarpaulin 12m by 12m with ropes and spikes of adequate size , portable 5kva silent diesel gen set with battery push button start , binoculars , vernier calipers digital , digital multi-meter , high sensitivity digital multi-meter , aluminium self supporting stool type magjic pole ladder 8 feet long , drop out fuse pull rod made of fibre body extension type and suitable for use on 25 kv ohe , half inch square drive socket set containing 22 sockets with 5 attachments packed in power coated carrying case , transformer oil acidity testing kit with all accessories , portable arc welding machine 250 a capacity , clip on digital tong tester suitable for measuring ac current 600amp , digital breaker time interval meter , insulation megger with voltage selectable range of 250v and 500 v and 1000 v , supply of automatic transformer oil bdv testing kit , transformer oil filtration plant 125 litre per hour capacity , auto transformer which should be close type dimmer , load cell tester suitable for 40 ah and 200 ah battery , spanners set , 52 pieces socket set with storage case , insulation megger with voltage selectable range , supply of digital ground or earth tester , thermal imaging camera with software , fully automatic capacitance and tan delta test set , transformer oil as per is 12463 , ratchet lever hoist three point two ton , ratchet lever hoist one point six ton , universal come along clamp , extension ladder 2 by22 , pillar drill machine , bench grinder , portable welding generator set , industrial safety belts and harnesses , heavy duty contact wire cutter 36 inch suitable to cut copper contact wire 107 sq.mm , supply of dropper wire cutter size 12 inch. , single sheave pulley block wheel size three point five inch by half inch , single sleave pulley of fibre of size three point five by half , single sleave pulley blockof steel of size six by one , polyester slings with 1 tonne , double ply polyester webbing slings , ply polyesterwebbing slings with load capacity 3 tonne , polyester slings of 4 m and 10 m , supply of contact wire splicing jig suitable to splice 107 sqmm contact wire , angle cutter electric 355 , supply of 5 drill bits rotary hammer drill ndrf , fiber ladder of 11m and 8m , atd bearing removal tool , hydraulic crimping tool , spring loaded stabilizer auger type post hole digger , digital spirit level , single point laser class ii handheld digital infrared thermometer , hydraulic dyanamometer 10 ton capacity with steel carrying box , 4 stroke engine telescopic pole , digital camera , hand operated rotary barrel pump , chain pulley block 3 tonne capacity with standard lift 3 meter as per is 3832 , fibre body handheld electric blower , magic pole ladder 8 feet made out of aluminium side section , transformer oil sampling bottles, size 1500 millilitre in box. , contact resistance meters measuring range 100 milli ohm , digital lcr meter 3 one by two digit 1999 counts , supply //bid details 2 / 62 of magnetic drill machine with magnetic stand , rechargebale portable battery operated hand cutter

Central Government/Public Sector

CTN :45551629

24 Jun, 2026 NA

Angul - Odisha

Tender For providing of testing service for on-board /commissioned equipment/ instrument related to plant - ndt; deflection measurement data (load test), magnetic particle testing, ultrasonic testing facility, penetrant testing facility; nabl labs

Landfill Management Service Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors