Latest landing gear scrap Tenders | Government landing gear scrap Tenders

CTN :45482035

15 Jun, 2026 19.50 Lacs

Rohtak - Haryana

Tender For supply of various parts of horizontal pumps and tools... - ms flat 50*5 mm, ms angle 50*50*5mm, 50*50*6mm (tata,sail,jindal make), ms channel ismc 100 (tata,sail,jindal make), ss round bar 30 mm(line shaft), ss round bar 40 mm(line shaft), plastic rope 3/4", nut & bolt 5/8"x 3", m.s nut & bolt 5/8" x 21/2", ms nut bolt 5/16x 1.5", ms nut bolt 1/2" x 2", ms nut bolt 1/2" x 11/2", ms nut & bolt 1/2" x 21/2", ms nut & bolt 1/2" x 3", ss nut bolt 3/4x3, stud with nut 11/16 x 5/8 x 3", stud with nut 5/8x 5/8 x 3", gi wire 8 swg, gland packing 3/8", gland packing 1/2", lift belt 5ton cap x 4 mtr, lift belt 3ton cap x 3 mtr, lift belt 3ton cap x 2 mtr, gland plate for n.w-12d, gm gland plate for 5 c/s v.t pump as per sample, g.m gland plate for 10 c/s v.t pump as per sample, pipe wrench 12"(300mm size) (taparia/pye/miranda/spartan/stanley make ), hammer 1lbs, screw driver 10" 250mm (taparia/pye/miranda/spartan/stanley make ), screw driver 12" (taparia/pye/miranda/spartan/stanley make ), screw driver 8" (taparia/pye/miranda/spartan/stanley make ), ring spanner 24x26mm (taparia/pye/miranda/spartan/stanley make ), insulated plier 8" (200mm) (taparia/pye/miranda/spartan/stanley make ), long nose plier 8" (taparia/pye/miranda/spartan/stanley make ), d-e spanner 21x23 (taparia/pye/miranda/spartan/stanley make ), d-e spanner 24x26mm (taparia/pye/miranda/spartan/stanley make ), d-e spanner 14x15mm (taparia/pye/miranda/spartan/stanley make ), d-e spanner 12x13mm (taparia/pye/miranda/spartan/stanley make ), ring spanner 14x15 (taparia/pye/miranda/spartan/stanley make ), ring spanner 21x23 (taparia/pye/miranda/spartan/stanley make ), ring spanner-12x13 (taparia/pye/miranda/spartan/stanley make ), line tester (7"- 8") (taparia/pye/miranda/spartan/stanley make ), freemans 5mx19mm measuring tape with belt clip and lock, hexa blade one side/double side mix, welding holder heavy duty, hdpe tirplaine 15 x12 heavy duty, coupling tyre tc 13, delivery casing for nw-12d inner for kirlosker pump, delivery casing for nw-12d outer for kirlosker pump, impeller 6x6 nw-12d kirloskar pump, bearing pedestal for nw-12d kirlosker make, shaft for nw-12 d pump kirlosker make, lantern ring for nw-12 d pump kirlosker make, water deflector for nw-12 d pump kirlosker make, abrasive cutting wheel 14 (grindwell norton, 3m, bosch make), motor shaft with check nut 5 c/s v.t pump as per sample, impeller nut mf for 5 cs horizontal pump as per sample, fuel pump gear tv-2 kirlosker make, servo super oil mg 20w-40, log book of vehicle (25 page) as per sample, mas register (50 page) as per sample, log book of machinery (25 page) as per sample, cyl liner with joint ring 1800801 kirlosker make, valve kit tv-2 kirlosker make, liner piston chota jawan kirlosker make, head gasket 87.5 mm 1180090300 kirlosker make, air cleaner kirlosker make, packing kit tv-2 kirlosker make, pipe t type kirlosker make, fuel tank complete kirlosker make, fuel filter assy kirlosker make, nozzale chota jawan kirlosker make, air cleaner chota jawan kirlosker make, packing kit chota jawan kirlosker make, valve kit chota jawan kirlosker make, head gasket chota jawan kirlosker make, diesel filter chota jawan kirlosker make, banjo bolt tv2 kirlosker make, nozzle 9430034216 kirlosker make, piston assy.180061000-1800615000 kirlosker make, cr bolt tv2 kirlosker make

CTN :45410518

16 Jun, 2026 NA

Multi City - Multi State

Tender For supply of electrical item c c - bore bent to shape as required at site , supply and fixing of sub main wiring with three core 1.5 sqmm multi stranded copper conductor pvc insulated unsheathed frls cable 1100 volts grade , supply and fixing of solar street light fitting 12 watt having high efficiency mono crystalline solar pv module, lithium ferro phosphate battery with in-built bms technology, high efficacy led , supply and fixing of solar street light fitting 16 watt having high efficiency mono crystalline solar pv module, lithium ferro phosphate battery with in-built bms technology, high efficacy led , supply and fixing of solar street light fitting 20 watt having high efficiency mono crystalline solar pv module, lithium ferro phosphate battery with in-built bms technology, high efficacy led , supply and errection in replacement of steel tubular swaged pole 8.5 m long type 410-sp-22 complete with cl base plate , m and l for pcc 1-3-6 type c2 using 40mm graded aggregate crushed stone aggregate as in pole foundation, filling and mass concrete complete all as specified and directed. , m and l for plain cement concrete 1-2-4 type b1 using 20mm graded stone aggregate , supply of paint and painting of steel pole swan neck type or straight type up to 9 mtr height with two coat of aluminium paint after scratching out old paint , supply, erect and commissioning of high galvanized mast light of height 15 mtr, suitable for 6 to 9 lantern symmetrically fitted along with their control gear , m and l for boring of horizontal hole under road, pavement, hardstanding suitable for passing through upto 50mm bore complete all specified and directed. , replacement of unserviceable wire by cable from junction box to light fitting fixed on pole on existing pvc conduit by pvc insulated unsheathed copper conductor frls of 1.5 sqmm three core. , supply of laying and digging excavation in trenches n exc 1.5 wide and n exc 1.5 m in depth for foundation etc , returning filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm complete all as specified and as directed , supply of digging and laying removal of excavated material by surplus soil to a distance n exc 50m and depositing where directed at a level n exc 50m above the starting point , supply and laying sand in trenches for protection of cable, sand cushioning to cable 8 cm thick below cable and 15 cm thick above cable in layers complete all as specified and as directed , supply and lay fly ash bricks best quality, laid in trenches, perpendicular to ug cable for cable protection complete all as specified and directed , laying only old bricks obtained from item no 13 perpandicular to ug cable for cable protection complete all as specified and directed. //bid details 2 / 35

CTN :44948168

06 Jul, 2026 NA

Izatnagar - Uttar Pradesh

Tender For supply of lantern gear complete as per bt part no.s-1470 and drg.no.ag-416040 r1 or aal part no.g-1470 and drg.no.9980383508801.spare for tap change type no-32 [ warrantyperiod: 30 months after the date of delivery ]

CTN :45212832

26 May, 2026 50.17 Lacs

Sundergarh - Odisha

Tender For tender for supply of unloading spout and ahs spares - macawber beekey mbpl 100nb pipe in pip , macawber beekey mbpl 150nb pipe in pip , macawber beekey mbpl 125nb pipe in pip , macawber beekey mbpl 150nb castbasalt , macawber beekey mbpl 100nb castbasalt , macawber beekey mbpl 125nb castbasalt , 85tph below bottom ash hopper lantern ri , 85tph below bottom ash hopper circlip a1 , macawber beekey mbpl above unloading s , macawber beekey mbpl spout drive chai , macawber beekey mbpl unloading spout , macawber beekey mbpl felt seal fs 330 , macawber beekey mbpl spout sleeve ss4 , macawber beekey mbpl below hcsd fly as , macawber beekey mbpl below hcsd fly as , macawber beekey mbpl non return valve , macawber beekey mbpl non return valve , macawber beekey mbpl non return valve , macawber beekey mbpl non return valve , macawber beekey mbpl non return valve , macawber beekey mbpl non return valve , 85tph helical gear box ratio 15 5 1 , 85tph fc sm6 oil 40 from vertical , 85tph 18 below bottom ash hopper sleeve , 85tph hopper sleeve s s 410 416 350bhn , 85tph strand roller chain 1 1 2 p , 85tph sprocket 1 1 2 p teeth 34 , 85tph sprocket 1 1 2 p teeth 23 , 85tph size 18 below bottom ash hopper , macawber beekey mbpl below hcsd fly as , macawber beekey mbpl blow valve 40nb , macawber beekey mbpl blow valve 50nb , macawber beekey mbpl blow valve 80nb , macawber beekey mbpl blow valve 25nb , mbpl unloading spout 60t drive sprocket , mbpl unloading spout 60t driven sprocket , mbpl unloading spout 60t chain , mbpl unloading spout 60t bottom cone , mbpl unloading spout 60t inner cone with , mbpl unloading spout 60t inner cone w o , mbpl unloading spout 60t top cone , mbpl unloading spout 60t flexible cloth , mbpl unloading spout 60t belt , mbpl unloading spout 60t lifting cone , mbpl unloading spout 60t pleated filter

Central Government And Public Sector

CTN :45213627

29 May, 2026 NA

Angul - Odisha

Tender For tender for supply of spares of clinker grinder -driving sprocket , driven sprocket , driving shaft , driven shaft , driving gear pt no 552 013 01 , brg assy non expansion clinker grinder , split lantern ring , wear plate , bearing assembly expansion for clinke , 8 tangential hydroejector assy , angle

Central Government/Public Sector

CTN :45184018

10 Jun, 2026 NA

Erode - Tamil Nadu

Tender For supply of lantern gear pinion for n32 tap changer for conventional locos. as per rdso specn. no.:elrs/epec/gr/0039 (rev.-2), to m/s. repl part no s1470 and drg no ag-416040-r1 or m/s. ae part no g-470 and to drg no 9980383508801 [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45050564

05 May, 2026 NA

Erode - Tamil Nadu

Tender For supply of lantern gear pinion for n32 tap changer for conventional locos. as per rdso specn. no.:elrs/epec/gr/0039 (rev.-2), to m/s. repl part no s1470 and drg no ag-416040-r1 or m/s. ae part no g-470 and to drg no 9980383508801 [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :41568470

24 Apr, 2026 5.57 Lacs

Bardhaman - West Bengal

Tender For bid to ras supply of sprocket c c - split lantern ring eqp 2x3 wide clinker grinder assy , wear ring eqp 2x3 wide clinker grinder assy , shaft sleeve eqp 2x3 wide clinker grinder assy , nozzle tip ceramic lined ss , driven sprocket , drive sprocket eqp 750 nb rotary feeder , 750 mm rotary feeder assembly , silencer of vaccum pump of ahp , worm and worm gear of gear box

Central Government/Public Sector

CTN :44913391

04 May, 2026 NA

Erode - Tamil Nadu

Tender For supply of lantern gear pinion for n32 tap changer for conventional locos. as per rdso specn. no.:elrs/epec/gr/0039 (rev.-2), to m/s. repl part no s1470 and drg no ag-416040-r1 or m/s. ae part no g-470 and to drg no 9980383508801 [ warranty period: 30 months after the date of delivery ]

CTN :44752553

14 Apr, 2026 NA

Auraiya - Uttar Pradesh

Tender For supply of spares for qlar make measuring feeders : : - bearing, gland housing assembly, de , bearing, gland housing assembly, nde , lantern ring , shaft bushing sleeve , belt,2m 024g,500x2348x3mm,jd 305 , helix 35 x 35 met m knf per polished , helix 44 x 44 met m knf per polished , protective cap yellow , flexible connection , hopper , carrier shaft , seal cartridge including wear protection sleeve for mechatron 8484 20 00 , helix d57 p57 length650 asm c3000 , agitation gear vertical agitator , bearing housing standard, complete with seal cartridge and drive shaft

Landing Gear Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector