Get complete information related to latest Langoor Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Langoor Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Langoor Tenders.
Tender For corrigendum : balance work of cni package of rnm of unit 3 of ukai tps - balance work of electrical and c&i system, handing over material to customer, site stores/storage yard, transportation to site of work, complete erection, calibration, testing, commissioning and handing over of electrical and control & instrumentation works for boiler and its auxiliaries and turbine and its auxiliaries for renovation & modernization of ukai r&m u#3 (200mw)
Tender For auction sale of pway scrap - 1) condemned u/s cl.iii rail 52 kg - 327.26 mtrs, rail 60 kg -100.110 mtrs, quantity - 23.023 mts. ds8 no.029464 - 25 - 00003 dt.17.02.2026. location - at mdve yard between ohe mast mdve/1005 to 1007 up loop line 2) condemned u/s cl.iii rail 52 kg - 227.73 mtrs, rail 60 kg -167.150 mtrs, quantity - 21.903 mts. ds8 no.029464 - 25 - 00002 dt.17.02.2026. location - at mdve yard between ohe mast mdve/1007 to 1009 up loop line. 3) rail 52 kg - 826.45 mtrs, rail 60 kg -15.160 mtrs, quantity - 43.799 mts. ds8 no.029464 - 25 - 00001 dt.09.02.2026. location - at mdve yard between ohe mast mdve/1017 to 1023 up loop line, in sse/pw/wjr section, cum qty 88.725 mts custodian - sse/pw/wjr, . note- 1)delivery to be made on linear measurement basis. 2)when scrap rails for delivery on sectional weight basis are longer than 5 metres, to facilitate loading, purchasers [by engaging his own labourers] are permitted to cut the rails to convenient lengths of not less than 2.5 metres. 3)any type of road vehicle is permitted for loading of lot material. however, depending upon the lot location, on the date of delivery, the custodian shall decide on granting such permission, strictly observing all prescribed safety precautions.. 4)any clarification in location/ ds8 no & date - manual ds8/inspection report may be reffered with custodian(lot quantity column in catalogue/do is authentic. 4) purchaser has to ensure that lorry, crane , labour are arranged well in advance before effecting inventory of the lot(wherever applicable). 5)custodian should arrange to issue hard copy(phostat) of ds8s,do, etc.,(only essential documents) to all witnessing officials at the do location before taking inventory. purchaser is not responsible for handing over of do/ds8 copies. 6)nfs - as per udm/manual ds8/lot inspection report. any other attachment, to be cut and hand over to custodian. any other nfs material in the lot other than items earmarked for sale, should be handed over to custodian at the time of delivery.
Tender For auction sale of pway scrap - condemned u/s cl.iii rail 60 kg - 202.16 mtrs, rail 52 kg - 30.16 mtrs, rail 90 r - 84.84 mtrs, rail 75 r - 6.40 mtrs, rail 41 1/4 - 3.70 mtrs, quantity - 17.865 mts. ds8 no.295305 dt. 03.03.2026. custodian - sse/pw/jtj location - at behind old sse/works/jtj office in sse/pw/jtj section. note- 1)delivery to be made on linear measurement basis. 2)when scrap rails for delivery on sectional weight basis are longer than 5 metres, to facilitate loading, purchasers [by engaging his own labourers] are permitted to cut the rails to convenient lengths of not less than 2.5 metres. 3) any type of road vehicle is permitted for loading of lot material. however, depending upon the lot location, on the date of delivery, the custodian shall decide on granting such permission, strictly observing all prescribed safety precautions.. 4)any clarification in location/ ds8 no & date - manual ds8/inspection report may be reffered with custodian(lot quantity column in catalogue/do is authentic. 4) purchaser has to ensure that lorry, crane , labour are arranged well in advance before effecting inventory of the lot(wherever applicable). 5)custodian should arrange to issue hard copy(phostat) of ds8s,do, etc.,(only essential documents) to all witnessing officials at the do location before taking inventory. purchaser is not responsible for handing over of do/ds8 copies. 6)nfs - as per udm/manual ds8/lot inspection report. any other attachment, to be cut and hand over to custodian. any other nfs material in the lot other than items earmarked for sale, should be handed over to custodian at the time of delivery.
Tender For auction sale of pway scrap - 1) condemned u/s cl.iii rail 60kg - 682.51 mtrs, quantity - 41.183 mts. ds8 no.029543 - 25 - 00008 dt. 18.03.2026. 2) condemned u/s cl.iii rail 60kg - 633.30 mtrs, quantity - 38.213 mts. ds8 no.029543 - 25 - 00007 dt. 20.02.2026. cum qty 79.396 mts custodian - sse/pw/kpd, note- 1)delivery to be made on linear measurement basis. 2)when scrap rails for delivery on sectional weight basis are longer than 5 metres, to facilitate loading, purchasers [by engaging his own labourers] are permitted to cut the rails to convenient lengths of not less than 2.5 metres. 3)any type of road vehicle is permitted for loading of lot material. however, depending upon the lot location, on the date of delivery, the custodian shall decide on granting such permission, strictly observing all prescribed safety precautions.. 4)any clarification in location/ ds8 no & date - manual ds8/inspection report may be reffered with custodian(lot quantity column in catalogue/do is authentic. 4) purchaser has to ensure that lorry, crane , labour are arranged well in advance before effecting inventory of the lot(wherever applicable). 5)custodian should arrange to issue hard copy(phostat) of ds8s,do, etc.,(only essential documents) to all witnessing officials at the do location before taking inventory. purchaser is not responsible for handing over of do/ds8 copies. 6)nfs - as per udm/manual ds8/lot inspection report. any other attachment, to be cut and hand over to custodian. any other nfs material in the lot other than items earmarked for sale, should be handed over to custodian at the time of delivery.
Tender For auction sale of depot ferrous scrap - 98050114 scrap release all types of railway ferrous material consisting of s&t, p way, works and ohe items c & w items- such as ms, gi, ci containing signalling units, rods, junction boxes, panels, ms gi structures, ladders, mast, rtu, cb, etc. and all other types of signaling items, gear case, the ground connection, ohe fitting, ms chains, heavy structure almirah/racks, rods angle, top housing, road bar, glude joint, ground connection channel, pipes, lc material, ladders, jali, spring plank, pantograph with or without pneumatic motor, gate, door, brake cylinder, tie bar, fencing, trolley, ms machines etc., tmt bars rods, pulley, rib cage, point machines without motors, wagon body cut piece bogies side frame, machines, sleeper, ms sheet, various types sleeper part, tie bar, fencing bars, i-beam, damaged empty drums, light fittings, rail & rail pieces, ms wires, junk light weight/corroded material consist of toughened sheets, m.s./gi sheets, grease seal, drum, wire, parts of rolling shutter, light weight cuttings, various damaged and rusty drums filled with coalter, dry paint, mud and dray fo if any of sort and sizes, g.i. buckets, steel buckets baskets, signal lamps, duct, vent pcs., fencing and pipes, wire mesh, stretcher, bicycle, pan, frames, electrical fittings, t.l. fittings, grill- jali, cabinet frames, rack ballast, rusted body and parts of weighing machine, electronic/electrical material, small rods angle, battery boxes, tool boxes, shovel, rail door handles, main door, foot plate, step plates, bench pipes, typewriter g.i. pipes, trolleys, water tank bond, location box with or without their component and wiring fittings, trolly, different type of ohe bonds of rail and other various ms fabricated structures, break load rings, pins, screw, bolts, spikes, keys, loco parts, stay rods, sleeve for centre pivot, pantograph parts, palm pull rods, lever, axle box housings, air motor, springs of pantograph, connecting rods, and other rods, rear cover of axle box housing, longer hanger, spare parts of spt machine, pipe fittings, end shield covers, break beam hangers, brake shoe, vertical lever, suspension levers, compressor spares, tension rods bushes, dash pots, ms& wi turning borings cut, collars, vehicle spares, ci items consisting of rusty and dusty drainage pipe, valve, meter, brake block, pulley, motors body, pipes, plates, d.v, vacuum cylinder chamber, pig irons pieces, signaling box ohe fittings, steel furniture consisting of chairs, tables, g.i. separation sheet, chair , stretcher, beds, ms rack, almira, other types of steel furniture of sorts and sizes, broken, damaged with or without wood, cushions, plastic, mica, foam seat attachment, parts brake liner, thrust bearing, spring, yoke, insulation block hangers, slides, locking rods, parts of point machine, a b cover, break head, cylinder head, pcs. of break beam, protective tubes, and other p-way fittings, coupler, knuckles, cp top/bottom, pu pad, narrow/wide jaw adapter, released bulk head components, wagon doors, cutting plate, and assorted cut pieces thereof, fabricated from irsm 44, etc. brake cylinder, cs & ci if any. valve, broken pcs. of bearings, inner and outer race of bearings, spares of break valve, trolley wheels, clamps, bmbc parts, pump shafts, impellers, tension device parts, fan armatures, chain sling, rev. center, hooks, spares of trucks, accessories of transformer, fish plates, hooks, silent blocks, cut pieces of plates, doors, angles, etc., all plastic items, rubber and wooden , fasteners such as bolts, nuts, and other related misc, etc., with or without, rail, of sorts and sizes with or without parts fittings and minor non-ferrous attachments, unserviceable. excluding items - railway track. remarks:the quantity estimation is based on visual observation and is indicative only. the lot has been prepared to clear the land before handing over the scrap yard for memu work. 2. loading will be allowed
Tender For supply of from no. com-363. register showing daily accountal of excess fare ticket and handing over memo issued. book of 100 leaves . 1)unit- number of books, 2)size-305x430mm,plus/minus 5mm, 3)printing paper- white map litho 60 gsm, i.s no. 1848/part(1)2018. 4) printing- both side in black ink, printing matter to be collected from consignee, 5)binding- center four stitching by 20gauge wire with straw board of 68dkg (1350gsm),i.s.no.2617/67, brown paper to be pasted on both side. 6)sample:- one sample for printing, binding and finishing to be got approved from consignee before bulk printing, 7) packing: each pack will contain ten plus ten total twenty books. each ten books must be wrapped in more than 50 micron transparent poly propylene foil or bag as suitable as approved by govt. and packed in suitable size of five ply corrugated cartoon box with proper label (printing size 48pt.) of p.l.no., form no. & serial no. if any. special condition:-quantity is in number of books and material to be supplied in book. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For auction sale of pway scrap - condemned u/s cl.iii rail 60kg - 72.72 mtrs, rail 52 kg -139.48 mtrs, quantity - 11.626 mts. ds8 no.029476-25-00006 dt. 11.02.26. custodian - sse/pw/ab. location - at km 189/5-7 up line near lc -79 in sse/pw/ab section. note- 1)delivery to be made on linear measurement basis. 2)when scrap rails for delivery on sectional weight basis are longer than 5 metres, to facilitate loading, purchasers [by engaging his own labourers] are permitted to cut the rails to convenient lengths of not less than 2.5 metres. 3)any type of road vehicle is permitted for loading of lot material. however, depending upon the lot location, on the date of delivery, the custodian shall decide on granting such permission, strictly observing all prescribed safety precautions.. 4)any clarification in location/ ds8 no & date - manual ds8/inspection report may be reffered with custodian(lot quantity column in catalogue/do is authentic. 4) purchaser has to ensure that lorry, crane , labour are arranged well in advance before effecting inventory of the lot(wherever applicable). 5)custodian should arrange to issue hard copy(phostat) of ds8s,do, etc.,(only essential documents) to all witnessing officials at the do location before taking inventory. purchaser is not responsible for handing over of do/ds8 copies. 6)nfs - as per udm/manual ds8/lot inspection report. any other attachment, to be cut and hand over to custodian. any other nfs material in the lot other than items earmarked for sale, should be handed over to custodian at the time of delivery.
Tender For auction sale of pway scrap - condemned u/s cl.iii rail 52 kg - 945.77 mtrs, rail 60 kg -2.20 mtrs, quantity - 49.209 mts. ds8 no.029488-25-00001 dt. 05.12.2025. custodian - sse/pw/trt. location - at km 91/24 - 26, km 91/26 - 28 dn line lh side between vkz - ng in sse/pw/trt section. note- 1)delivery to be made on linear measurement basis. 2)when scrap rails for delivery on sectional weight basis are longer than 5 metres, to facilitate loading, purchasers [by engaging his own labourers] are permitted to cut the rails to convenient lengths of not less than 2.5 metres. 3) any type of road vehicle is permitted for loading of lot material. however, depending upon the lot location, on the date of delivery, the custodian shall decide on granting such permission, strictly observing all prescribed safety precautions.. 4)any clarification in location/ ds8 no & date - manual ds8/inspection report may be reffered with custodian(lot quantity column in catalogue/do is authentic. 4) purchaser has to ensure that lorry, crane , labour are arranged well in advance before effecting inventory of the lot(wherever applicable). 5)custodian should arrange to issue hard copy(phostat) of ds8s,do, etc.,(only essential documents) to all witnessing officials at the do location before taking inventory. purchaser is not responsible for handing over of do/ds8 copies. 6)nfs - as per udm/manual ds8/lot inspection report. any other attachment, to be cut and hand over to custodian. any other nfs material in the lot other than items earmarked for sale, should be handed over to custodian at the time of delivery.
Tender For auction sale of pway scrap - condemned u/s cl.iii rail 60 kg - 42.59 mtrs, rail 52 kg - 729.83 mtrs, rail 90 r - 1.07 mtrs, rail 80 bh - 1.60 mtrs, rail 41 1/4 - 1.93 mtrs, quantity - 40.591mts. ds8 no.0295304-25-00004 dt. 26.02.2026. custodian - sse/pw/jtj location - at jtjr/19 - 215a/27 & jtj/bp 4 to 3 in sse/pw/jtj section. note- 1)delivery to be made on linear measurement basis. 2)when scrap rails for delivery on sectional weight basis are longer than 5 metres, to facilitate loading, purchasers [by engaging his own labourers] are permitted to cut the rails to convenient lengths of not less than 2.5 metres. 3) any type of road vehicle is permitted for loading of lot material. however, depending upon the lot location, on the date of delivery, the custodian shall decide on granting such permission, strictly observing all prescribed safety precautions.. 4)any clarification in location/ ds8 no & date - manual ds8/inspection report may be reffered with custodian(lot quantity column in catalogue/do is authentic. 4) purchaser has to ensure that lorry, crane , labour are arranged well in advance before effecting inventory of the lot(wherever applicable). 5)custodian should arrange to issue hard copy(phostat) of ds8s,do, etc.,(only essential documents) to all witnessing officials at the do location before taking inventory. purchaser is not responsible for handing over of do/ds8 copies. 6)nfs - as per udm/manual ds8/lot inspection report. any other attachment, to be cut and hand over to custodian. any other nfs material in the lot other than items earmarked for sale, should be handed over to custodian at the time of delivery.
Tender For auction sale of pway scrap - condemned u/s cl.iii rail 60 kg - 490.90 mtrs, rail 90 r - 6.52 mtrs, quantity - 29.912 mts. ds8 no.029543-26-00001 dt. 21.04.2026. custodian - sse/pw/kpd location - thl post no thl/1018 - 1020 dn line side in sse/pw/kpd section. note- 1)delivery to be made on linear measurement basis. 2)when scrap rails for delivery on sectional weight basis are longer than 5 metres, to facilitate loading, purchasers [by engaging his own labourers] are permitted to cut the rails to convenient lengths of not less than 2.5 metres. 3) any type of road vehicle is permitted for loading of lot material. however, depending upon the lot location, on the date of delivery, the custodian shall decide on granting such permission, strictly observing all prescribed safety precautions.. 4)any clarification in location/ ds8 no & date - manual ds8/inspection report may be reffered with custodian(lot quantity column in catalogue/do is authentic. 4) purchaser has to ensure that lorry, crane , labour are arranged well in advance before effecting inventory of the lot(wherever applicable). 5)custodian should arrange to issue hard copy(phostat) of ds8s,do, etc.,(only essential documents) to all witnessing officials at the do location before taking inventory. purchaser is not responsible for handing over of do/ds8 copies. 6)nfs - as per udm/manual ds8/lot inspection report. any other attachment, to be cut and hand over to custodian. any other nfs material in the lot other than items earmarked for sale, should be handed over to custodian at the time of delivery.