Latest lantern bracket Tenders | Government lantern bracket Tenders

corporations/Associations/Others

CTN :45715658

15 Jul, 2026 9.50 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of casing cover of swc pump , complete expansion tank make-up pump with motor, coupling set, foundation frame , complete bearing cooling water pump , complete stator water cooling pump , lantern ring of h2 gas cooling pump , split gland of h2 gas cooling pump , liquid deflector of h2 gas cooling pump , lantern bracket of h2 gas cooling pump , key for impeller of h2 gas cooling pump , key for coupling of h2 gas cooling pump , o ring of h2 gas cooling pump , oil seal of h2 gas cooling pump , internal circlip of h2 gas cooling pump , shaft sleeve of h2 gas cooling pump , impeller wear ring - ds , impeller wear ring - ss , casing wear ring - ds , casing wear ring - ss , helicoil screw lock inert of h2 gas cooling pump , lock washer - bearing lock nut of h2 gas cooling pump , pump casing of swc pump

CTN :45697944

13 Jul, 2026 75.00 Lacs

Dhanbad - Jharkhand

Tender For supply of pn or zener diode or led characteristics apparatus , verification of kcl and kvl , resistance in series and parallel apparatus , ohms law apparatus without power supply , ohms law apparatus with aluminum panel 2 digital panel meters and power supply , transistor characteristics apparatus , fet characteristics apparatus , half wave full wave and bridge rectifier apparatus , ripple factor apparatus , digital logic trainer , verification of truth table of logic gates using universal gates , flip flops using nand gates and ttl ics , four bit counters synchronous and asynchronous , four bit shift registers , encoder or multiplexer eight to one line , decoder or demultiplexer one to eight line , four bit analog to digital convertor , four bit digital to analog convertor , light intensity or phase control using scr or triac , scr commutation techniques , switching action of a bjt , single phase half wave full wave and fully controlled bridge rectifier or convertor using scrs , three phase half controlled bridge converter with r and rl load , three phase fully controlled bridge converter with r and rl load , single phase cycloconverter , instrumentation trainer using transducers , burdon tube pressure gauge trainer kit , strain gauge trainer kit with cantilever beam , lvdt trainer kit , speed measurement using photo electric and magnetic sensors , temperature sensors kit , measurement of water level using strain gauge , measurement of water level using capacitance transducer , ac servo speed torque characteristic trainer , dc servo motor speed torque characteristics trainer , stepper motor controller trainer , analog lab trainer bread board model , digital lab trainer bread board model , plc trainer , transmission line trainer abcd t and pi parameters ferranti effect load test , idmt over current relay testing kit electromechanical type , buchholz relay testing kit with compressor and oil , over voltage relay testing kit electromechanical type , over current and earth fault relay testing kit three phase static type , over current relay testing kit static type , measurement of power and power factor single phase and three phase , to study a typical bhk house wiring , four to one multiplexer and one to four demultiplexer , vapour compression refrigeration vcr test rig , water cooler setup , air conditioning test rig , domestic refrigerator , window air conditioner , split air conditioner , air cooler evaporative , tube cutter , pipe bender , flaring and swaging tool kit , reamer , brazing torch , manifold gauge set , vacuum pump , refrigerant recovery unit , refrigerant charging cylinder or electronic charging scale , refrigerant leak detector , digital clamp meter , digital thermometer , anemometer , tachometer , insulation material , refrigerants , recovery cylinders , weighing machine , electrical control panel , work benches , safety equipment

Central Government/Public Sector

CTN :45578759

07 Jul, 2026 10.84 Lacs

Ganjam - Odisha

Tender For supply of compressor model - kes-75 s-7.5 ac sl no. scr0002025, pressure transmitter, 4 to 20 ma, 8.2 to 34 v dc, 0-16 bar. , compressor model - kes-75 s-7.5 ac sl no - scr0002025, temperature sensor pt-100 , compressor model - kes-75 s-7.5 ac sl no - scr0002025, intake valve assembly , compressor model - kes-75 s-7.5 ac sl no - scr0002025, solenoid valve, nc type, 14 bar , compressor model - kes-75 s-7.5 ac sl no - scr0002025, proportional controller p3ne , compressor model - kes-75 s-7.5 ac sl no - scr0002025, microcontroller , compressor model - kes-75 s-7.5 ac sl no - scr0002025, service kit of valve minimum pressure , compressor model - kes-75 s-7.5 ac sl no - scr0002025, service kit for intake valve hdkg120 , compressor model - kes-75 s-7.5 ac sl no - scr0002025, element, thermostatic valve of 273.10.393.50. r4 and r5 , compressor model - kes 75-7.5 elec sl no - scr0004770, pressure transmitter, 4 to 20 ma, 8.2 to 34 v dc, 0 - 16 bar , compressor model - kes 75-7.5 elec sl no - scr0004770, rtd, weatherproof, pt-100, 3 or 8 inch bsp m screwed, im-adjustable length , compressor model - kes 75-7.5 elec sl no - scr0004770, solenoid valve, nc type, 14 bar , compressor model - kes 75-7.5 elec sl no - scr0004770, regulator-p3ne , compressor model - kes 75-7.5 elec sl no - scr0004770, service kit of valve minimum pressure , compressor model - kes 75-7.5 elec sl no - scr0004770, service kit for intake valve hdkg120 , compressor model - kes 75-7.5 elec sl no - scr0004770, element, thermostatic valve of 273.10.393.50. r4 and r5 , compressor model - kes 75-7.5 elec sl no - scr0004770, compressor controller, microprocessor based 24vdc for screw , compressor model - kes 75-7.5 elec sl no - scr0004770, analogue module, 4 ch. universal analog voltage or current or pt100. , compressor model - kes 75-7.5 elec sl no - scr0004770, communication port, 1 ch.rs 422 serial , compressor model - kese160-7.5i sl no - scr0007362, compressor controller, microprocessor based 24vdc for screw , compressor model - kese160-7.5i sl no - scr0007362, analogue module, 4 ch. universal analog voltage or current or pt100. , compressor model - kese160-7.5i sl no - scr0007362, communication port, 1 ch.rs 422 serial. , compressor model - kese160- 7.5i sl no - scr0007362, pressure transmitter, 4 to 20 ma, 8.2 to 34 v dc, 0 - 16 bar , compressor model - kese160-7.5i sl no - scr0007362, kit service, servo cylinder, r5, refer 274.02.857.50 , compressor model - kese160-7.5i sl no - scr0007362, kit service, proportional controller, r5, refer 274.02.857.50 , compressor model - kese160-7.5i sl no - scr0007362, kit service, solenoid coil, r5, refer 274.02.857.50 , compressor model - kese160-7.5i sl no - scr0007362, assembly air intake valve, kese 110, 132, 160 , compressor model - kese160-7.5i sl no - scr0007362, kit service, suction controller, r5, refer 274.02.857.50 , compressor model - kese160-7.5i sl no - scr0007362, kit service, venting valve, r5, refer 274.02.857.50 , compressor model - kese160-7.5i sl no - scr0007362, servo cylinder for intake valve 274.07.037.50. 5235792 //bid details 2 / 33

Central Government/Public Sector

CTN :45574594

07 Jul, 2026 10.84 Lacs

Ganjam - Odisha

Tender For supply of instrument spares for kirloskar make air compressor - pressure transmitter, 4 to 20 ma, 8.2 to 34 v dc, 0 - 16 bar., temperature sensor (pt-100), intake valve assembly, solenoid valve, nc type, 14 bar, proportional controller p3ne, microcontroller, service kit of valve minimum pressure, service kit for intake valve hdkg120, element, thermostatic valve of 273.10.393.50. r4 & r5, pressure transmitter, 4 to 20 ma, 8.2 to 34 v dc, 0 - 16 bar, rtd, weatherproof, pt-100, 3/8'' bsp(m) screwed, im-adjustable, length, solenoid valve, nc type, 14 bar, regulator-p3ne, service kit of valve minimum pressure, service kit for intake valve hdkg120, element, thermostatic valve of 273.10.393.50. r4 & r5, compressor controller, microprocessor based 24vdc for, screw, analogue module, 4 ch. universal analog, voltage/current/pt100., communication port, 1 ch.rs 422 serial., compressor controller, microprocessor based 24vdc for, screw, analogue module, 4 ch. universal analog, voltage/current/pt100., communication port, 1 ch.rs 422 serial., pressure transmitter, 4 to 20 ma, 8.2 to 34 v dc, 0 - 16 bar, kit service, servo cylinder, r5, refer 274.02.857.50, kit service, proportional controller, r5, refer 274.02.857.50, kit service, solenoid coil, r5, refer 274.02.857.50, assembly air intake valve, kese 110, 132, 160, kit service, proportional controller, r5, refer 274.02.857.50, kit service, suction controller, r5, refer 274.02.857.50, kit service, venting valve, r5, refer 274.02.857.50, kit service, solenoid coil, r5, refer 274.02.857.50, kit service, servo cylinder, r5, refer 274.02.857.50, servo cylinder for intake valve 274.07.037.50. ( 5235792 )

CTN :45533210

23 Jun, 2026 NA

Rohtak - Haryana

Tender For instrument spares for refinery - 3 way manifold, pressure-0 to 120 kg/cm2, with all mounting studs and accessories., air filter regulator, pressure 7 kg/cm2 make- precision, analog input card 8 channel for siemens make dcs part no. 331-1kf01-0ab0 make- siemens, analog ouput card 8 channel for siemens make dcs part no. 332-5hf00-0ab0 make- siemens, bagging machine controller for automatic bagging machine, make power build, model no c750 make- mettler toledo, chute lever sensor high temp. make- yu technologies pvt. ltd,, differential pressure switch, range 0.2 to 6 bar, differential - .25 to 1.2bar, sensing element- copper alloy, elec. ranting- ac-1 : 10 a, 230v ac, make- wika, digital input card 32 channel for dcs part no. 321-1bl00-0aa0 make- siemens, digital output card 32 channel for dcs part no. 322.1bl00-0aa0 make- siemens, discharge valve for pan discharge, input/output connection , double siphon pressure 120 kg/cm2, input/output connection : : threaded, flow meter totalizer, model no. 1008s, input-4 to 20 ma make massibus, flow meter for imbibitions water flow, range -100 tph, line size 4 make- krhne marshall, chute level indicator cum controller, no of sensor 6, output-4 to 20 ma, input supply-230 vol ac make- yu technologies pvt. ltd,, k type thermocouple sensor length -400mm, sensor thickness-6mm, duel output connection, input connection-1/2 npt (m) make- temson, load cell for automatic bagging machine, capacity-110 kg, positioner for control valve i/p 4-20ma, o/p- 4-20ma, make- ytc, pressure gauge range 0 to 160 kg/cm2, dial size 8 inch, input connection (bottom) npt(m) making black & white back ground make- baumer, pressure gauge- range- 0 to 20 kg/cm2, dial size: 150 mm, input connection : (bottom) npt (m), making : black & white back ground, with glycerin filled type make- baumer, pressure gauge- range- 0 to 4 kg/cm2, dial size: 150 mm, input connection : (bottom) npt (m), making : black & white back ground, make- baumer, pressure gauge- range- 0 to 25 kg/cm2, dial size: 150 mm, input connection : (bottom) npt (m), making : black & white back ground, with glycerin filled type make- baumer, pressure gauge- range- 0 to 10 kg/cm2, dial size: 150 mm, input connection : (bottom) npt (m), making : black & white back ground, make- baumer, smart type pressure transmitter , input 0 to 120 kg/cm2, input connection npt (m), hart enabled, with all mounting accessories. make- yokogawa/honeywell, pu tee, 8 mm x make- janatics, pu connector size dia, 8x make- janatics, pu connector both size flange size dia, 8x x 8x make- janatics, pu tube cap. dia 8 x , pressure-30 bar one roll-100 mtrs. make- janatics, rtd pt 100, sensor length 400mm, sensor thickness-6mm, duel output connection, input connection- npt 9m) make temson, sack grip belt for automatic bagging machine, seal kit for automatic bagging machine, model no. dnu 50, for bag clamp cylinder make- festo, seal kit for automatic bagging machine, model no. dnu 40, for course/fine cylinder make- festo, seal kit for automatic bagging machine, model no. dnu 40, for discharge cylinder make- festo, shuttle assembly for automatic bagging machine. make-festo, siemens s7 400 dcs backup batteries part no. 6es7971-0ba00 dc voltage- 3.6 vol make- siemens, single isolator input 0 to 1 amp. ac, output 4 to20 ma,(dual), input supply- 230 vol ac make- massibus, single isolator input 0 to 10 vol dc, output 4 to 20 ma,(dual), input supply- 230 vol ac make- massibus, single isolator input 4 to 20 ma, output 0 to 10 vol dc, (dual), input supply- 230 vol ac make- massibus, smps 24 vol dc source, input voltage: 110 vol dc/ 230 vol ac, output: 24 vol dc make- papper + fuchs, temperature gauge, spec- range 0 to 200 degree c, dial size 150mm, input connection: (bottonm) npt (m), making : black & white back ground, sensor thickness 6mm, capillary type, capillary length 1.5 mtr. make- baumer, temperature gauge, specification range -0 to 150 degree c, dial size: 150 mm, input conne

CTN :45354788

17 Jun, 2026 NA

Shekhapura - Bihar

Tender For bid to ras supply of arduino uno microcontroller , breadboard , jumper wires male female , resistors , led red green , capacitors , transistors , diodes , sensors , lcd , relay module , motors , power supply battery , multimeter , soldering kit , project work station , fpga trainer boards , logic analyzer , dual regulated power supply , arduino uno , stm dev board , pic development kit , raspberry pi , digital multimeter , dac trainer board , rtos trainer , soldering stations , lm analog temp sensor , ds digital temp sensor , ptrtd resistance temp detector , k type thermocouple , ir proximity sensor reflective ir , digital ir obstacle sensor , ir flame sensor , ir temperature sensor mlx90614 , mq two lpg smoke , mq three alcohol , mq six lpg butane , mq seven carbon monoxide , mq air quality , pir motion sensor , ultrasonic sensor , accelerometer , gyroscope , solderless breadboard full size , mini breadboard , jumper wires male male , jumper wires male female , jumper wires female female , ic socket eight pin , ic socket fourteen pin , ic socket sixteen pin , solar cell trainer kit , ujt as relaxation oscillator kit , scr characteristics kit , ldr , photo diode , phototransistor , semiconductor temperature coefficient trainer kit , logic gate trainer kit , ic trainer kit , measurement of steady state and transient response of rl rc and rlc circuits , frequency response of twin t notch filter and to study of active filter , study of single phase inverter trainer , to study the behaviour , determine the transient , to study of pid controller for simullatio n process , to study basic electric al trainer , to study single phase transformer , to obtain efficiency of a dc shunt machine , to obtain efficiency and voltage regulation of a single phase transform , to study dc series motor , make connection of dol starter , test the machines required , maxwells bridge trainer kit ) /bid number : gem/2026/b/7582907 * /dated: 27-05-2026 & & / bid document 1 / 44

CTN :45525479

06 Jul, 2026 11.85 Lacs

Kamrup - Assam

Tender For establishment of material testing laboratory under o/o the agm(c) design and projects aegcl kahilipara - civil works, compression testing machine (2000kn) with digital reading, automatic pace control with all attachment for testing concrete cube & bricks conforming to indian standards (is: 516, is: 14858) and can also be supplied as per british standards (bs: 1881), astm c-39 with calibration certificate. it should be typically calibrated to class 1 accuracy ( 1%); featuring a robust, fully welded loading unit and hardened, ground, and polished platens, often with a self-aligning upper platen; with display type as pc-controlled with software. it should have pace rate of full three-term pid feedback control with fully automated data acquisition, storage, and analysis. the operation should be fully automated, stress & strain controlled loading., aggregate impact test, crushing value apparatus with hammer weight of 13.75 kg 0.25 kg (or 14 kg 0.5 kg), height of free fall of 380 mm 5 mm, impact cup (mould) inner diameter of 102 mm 0.25 mm and impact cup depth of 50 mm 0.25 mm as per is 2386 (part iv), bs 812-112. automation grade often semi-automatic with a digital counter. display type digital for the blow counter; sometimes includes a digital gauge for other measurements. overall weight (approx.) should be of 45 kg to 60 kg (total machine mass). standards compliance conforms to international standards like is: 2386 (part iv), bs 812-112, etc. , sieves: (40, 20, 10, 4.75, 2.36, 1. 18) mm with lid and pan and (0.6, 0.3, 0. 15, 0.075) with lid and pan (all 200mm diameter size) metal : gi, weighing balance-30kg (accuracy-1gm)., weighing balance-5kg (accuracy-0.1gm)., hot air oven with double walled design, thick glass wool insulation to prevent heat loss, micro processor based auto tune pid digital temp controller cum indicators and 230 volt 50hz single phase ac supply, heavy duty stainless steel lock, indoor hinge and sample placement trays, temp range should be 50 degree c 250 degree c with temp accuracy 0.5 degree c. it should have digital led display of size 45 cm x 45 cm x 45 cm (inner)., cube mould (cast iron) of size 150mmx150mmx150mm, isi marked as per is:10086. weight of the mould will be about 13.5 kg, strictly as per bis specifications and within required tolerance., slump cone test apparatus-(isi marked)-with tamping rod (complete set ) as per is: 7320 and is: 1199 part 2, consisting of slump cone, base plate and graduated tamping rod - made of stainless steel., proctor test apparatus with all accessories as per is: 2720 part 8 and is: 10074(1982), complete with base plate and collar., measuring cylinder-borosilicate (1 complete set ) glass of sizes 100 ml, 250 ml, 500 ml and 1000 ml., field density test app-core cutter method ( complete set) complete with core cutter of 100 mm dia x 130 mm long with chromium plating, dolly for 100 mm dia core cutter, and rammer with steel rod as per is : 2720, rebound hammer digital (original/silver schmidt type n) with calibration certificate as per is 516 part 5, sec 4 with impact energy of 2.207 nm (1.63 ft-lbf), concrete strength range of 10 100 mpa (1450 14500 psi) and weight of 570 g (1.3 lb) with display as graphic lcd (e.g., 17x71 pixels) or analog/digital and battery life: >5000 impacts., ultrasonic pulse velocity test apparatus (proceq, acoustic control systems, vedantrik technologies) with calibration certificate and frequency range of 24 500 khz (nominal transducer); measurement resolution of 0.1 s (microseconds); pulse voltage ranging from 125 v to 500 v (adjustable); receiver gain of 1x, 10x, 100x, auto, up to 1000x (lab+ model); pulse shape as square wave; measurement modes as pulse velocity, surface velocity, e-modulus, compressive strength correlation, crack depth; memory which stores >500 measured values; display should be 79x21 mm passive matrix oled; connectivity through usb for pc connection; software: pundit link for analysis and export. standards compliance

corporations/Associations/Others

CTN :45513067

22 Jun, 2026 NA

Nashik - Maharashtra

Tender For mpcb , contactor , mcb , power supply , relay with base , 8 way relay board , power supply , voltage transducer , current transducer , fuse 100a , fuse 500a , proximity sensor , ceramic heater , 3phase circuit breaker , inverter , module, cube 67 , cylindrical hrc fuse , line monitoring relay , auxiliary contactor , thermal overload relay , hrc fuse 200a , hrc fuse 400a , plc power module , plc cpu module , analog inpur output module , plc dc input module , temperature controller , reed switch , contactor and auxiliar contactor , safety relay , glass fuse , hmi panel with plc , analog input output module , digital input output module , ceramic connector , vaccum sensor head , vaccum sensor amplifier , heater 100 band , temperature sensor , fiber sensor amp , switch with roller lever , relay , main switch with handle , ceramic fuse with fuse holder , current control relay , plc , timer , roller micro switch with lever , ceramic fuse , air pressure sensor , elcb , fuse , inverter speed controller , plug in base , ethernet switch mpcb moeller type pkzmo-4 2.5a-4.0a in=4a, electromagnetic contactor moeller type dilm 12-10 , mcb moeller current rating 16a 3-pole, mpcb moeller type pkzmo-16 10-16a, electromagnetic contactor moeller type diler-40-g , power supply weidmuller i/p-230vac,2a o/p-24vdc,5a, relay with base weidmuller type rcl 425024 24vdc contact 8a, 8-way relay board omron type g2rl-1 coil- 24vdc 12a,250vac, power supply shavison type pl2425 i/p voltage 230vac o/p-24 vdc,2.5a, power supply shavison type -g31-120-24 i/p voltage 230vac o/p-24 vdc,5a, mcb siemens 6a 2-pole, voltage transducer rish rish con cv 63-500v, current transducer rish * /bid number : gem/2026/b/7631412 + /dated: 11-06-2026 ' ' / bid document 1 / 68

CTN :45365495

12 Jun, 2026 NA

Sivaganga - Tamil Nadu

Tender For purchase of equipments ( s.no 1 to s.no 5 ) for ece department - purchase of equipments, dso (digital storage oscilloscope) bandwidth: 50 100 mhz. sampling rate: 1 gs/s. channels: 2 (minimum). power supply: 100 240 v ac, 50 60 hz. automatic measurements: vpp, vavg, vrms, frequency, period, vmax, vmin, rise time, fall time, +width, width, +duty, duty, etc. horizontal scale: 5 ns/div 50 s/div or equivalent. vertical resolution: 8 bits (2 channelssimultaneously). vertical sensitivity: 1 mv/div 10 v/div (at input). waveform math: +, , , , invert, fft, etc. waveform storage: 16 waveforms or equivalent. communication interface: usb host and usb interface. display: 7-inch color display or equivalent. input impedance: 1 m 2% || 20 pf. accessories: 2 passive probes (1x/10x), 8051 micro controller kit operating voltage: +5 v dc. flash memory: 4 kb (at89c51) / 8 kb (at89s52). ram: 128 bytes internal ram. 16 2 alphanumeric lcd display. push buttons / tactile switches. dip switches for digital input. inbuilt adc interface: ldr, potentiometer. inbuilt dac interface. inbuilt stepper motor driver with stepper motor. inbuilt dc motor driver with dc motor. 1 4 led array, 1 4 keypad, 1 relay. 1 buzzer, 16 2 lcd display, 1 pwm driver. 1 hardware interrupt key, inbuilt rtc. inbuilt eeprom and uart module. 4 7-segment display. supports both assembly and c language programming. pc interfaceable., embedded trainer kit (using lpc 2148) cpu - lpc2148, core - 16/32 bit arm7tdmi-s speed - max 60 mhz, flash - 512kb, ram (on-chip) 40kb, 46 general purpose i/opins, usb2.0 one 10bit a/d converter with 14 analog inputs, one 10bit d/a converter, six pwm & watchdog two uarts (16c550), two i2c (400kb/s), two spi eight bit digital output, eight bit digital input,16x2 characters lcd and 4x4 matrixkeypad one potentiometer for giving analog input, relay& buzzer interface i2c devices: rtc, eeprom and seven segment display, on board stepper motordriver lm35 temperature sensor, one rs 232 lines are terminated at 9 pin d type connector and usb interface board has inbuilt power supply and mounted in sturdy cabinet accessories usb cable with utility software to download programs from pc to target board power cord, user manual, strain guage trainer kit ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. signal conditioning and amplification circuit. instrumentation amplifiers with 3 digit display for strain / output voltage. zero and gain adjustment controls. provision for applying calibrated loads. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual., sim reader trainer kitpower supply: operates on 230 v ac 10%, 50 hz mains supply. built-in regulated smps power supply. operating dc supply: 5 v / 12 v with overload and short-circuit protection. sim card interface: supports gsm sim cards compatible with 2g /3g / 4g / 5g networks. sim card read/write interface. supports sim card initialization, authentication,and communication functions. compatible with standard 6-pin / 8-pin sim cardsockets.communication interface: usb 2.0 interface for pc communication. rs-232 serial communication interface. uart communication facility for embeddedsystem interfacing. sim operating parameters: selectable sim clock frequencies: 3.579 mhz 7.159 mhz 14.318 mhz sim supply voltage selection facility. sim reset and activation control.supported protocols and standards: gsm etsi 07.07 and etsi 07.05 at commandsupport. iso/iec 7816 smart card communication support. sim communication command monitoring facility.hardware features: on-board sim card socket. led indication for: power status sim detection reset activity data transmission/reception built-in keypad for standalone operation. lcd display module (128 64) for menu andstatus display. on-board microcontroller-bas

CTN :45343672

11 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of electronics and communication engineering practices (equipment) - equipments for electronics and communication engineering practices:, 8051 micro controller kit operating voltage: +5 v dc. flash memory: 4 kb (at89c51) / 8 kb (at89s52). ram: 128 bytes internal ram. 16 2 alphanumeric lcd display. push buttons / tactile switches. dip switches for digital input. inbuilt adc interface: ldr, potentiometer. inbuilt dac interface. inbuilt stepper motor driver with stepper motor. inbuilt dc motor driver with dc motor. 1 4 led array, 1 4 keypad, 1 relay. 1 buzzer, 16 2 lcd display, 1 pwm driver. 1 hardware interrupt key, inbuilt rtc. inbuilt eeprom and uart module. 4 7-segment display. supports both assembly and c language programming. pc interfaceable., embedded trainer kit (using lpc2148) cpu -lpc2148, core -16/32 bit arm7tdmi-s speed -max 60 mhz, flash -512kb, ram (on-chip) 40kb, 46 general purpose i/opins, usb2.0 one 10bit a/d converterwith 14 analog inputs, one 10bit d/a converter, six pwm &watchdog two uarts (16c550), two i2c (400kb/s), two spi eight bit digital output, eight bit digital input,16x2 characters lcd and 4x4 matrixkeypad one potentiometer for giving analog input, relay & buzzer interface i2c devices: rtc, eeprom and seven segment display, on board stepper motordriver lm35 temperature sensor, one rs 232 lines are terminated at 9 pin d type connector and usb interface board has inbuilt power supply and mounted in sturdy cabinet accessories usb cable with utility software to download programs from pc to target board power cord, user manual, ask modulation and demodulation kit message signal1:8-bit variable data,amplitude 5v. message signal 2:debounced data, amplitude low (0) and high (5 v). message signal 3:fixed data 25 khz, 12.5 khz, 6.25 khz, 3.12 khz, amplitude 5 v. carrier signal: sine wave, frequency 200 khz, amplitude 5 v. modulator type: switching modulator using analog switch / transistor switching ic. demodulator: envelope detector and lpf. comparator: lm311 based. supply voltage (board): +12 v, +5 v dc. supply current: 100 ma minimum. input voltage: 230 v ac, 50 hz. interface connectors: 2 mm banana socket., dth trainer kitpower supply: 200 v to 240 v ac, 50 hz.dish antenna: 1.5 ft aluminium steerable dish antenna.lnb (low noise block down converter):input frequency: ku-band. output frequency: 950 mhz to 1450 mhz. conversion gain: 65 db. noise temperature: 35 k (max).set-top box receiver in trainer form: if frequency: 70 mhz. video bandwidth: 50 hz to 5 mhz. video output level: 1 vpp at 75 load. video polarity: normal/inverted, switch selectable. audio subcarrier frequency: tunable from 5.0 mhz to 8.0 mhz. remote control provided. hdmi cable: 10 m.controls: channel selection. volume control.fault simulation: five built-in simulated faults for troubleshooting experiments. if signal disconnected. video output fault. audio mute fault. tuner misalignment. rf output interruption.pcb size: 15" 12" with multicolour section-wise block diagram.standard accessories: 1.5 ft dish antenna. lnb. trainer pcb. dish connecting wire. audio-video cable. user manual. acrylic cover. hardware materials for assembly of dish antenna.additional features: dth subscription connection with doordarshanfree channels. free-to-air channel demonstration.

Lantern Bracket Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others