Latest lantern restrictor Tenders | Government lantern restrictor Tenders

Central Government/Public Sector

CTN :45730997

07 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of self-priming mono-block pump assembly without controller, as per drawing: edts186, rev-a, corr-1,2, anx-1, oga as per annex-2, packing instruction: alternator,rru, erru&accessories, transformer,bulk inverters , battery, charger, self priming monoblock pump, inverter, change over control box etc: suitably covered with biodegradable transparent polythene and packed in wooden cage: bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suitable dimensions made out of wooden strips of 20x100mm size. gapbetween each strip should not be more then 100mm. the material used for product packaging shall be eco-friendly.a list should be pasted on each wooden cage showing order no, pl no, description of the item, drg. no/ spec. no ,qty, firm's name &address and date of despatch etc. note- 1) firms have option to provide qr code. for linkage of po, the cardboard box shall carry a qr code having details as listed below: a) name of the manufacturer b) purchaseorder number c) purchaseorder date d) uniqueserial number (or lot number for bulk items) of the manufacturer or e) dateof manufacture f) deliverychallan no. g) deliverychallan date 2.the qr code shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45731013

07 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of feeder juction box for bangladesh coaches, as per drawing: edml261, rev. 1, packing instruction: alternator,rru, erru &accessories, transformer,bulk inverters , battery, charger, self priming monoblock pump, inverter, change over control box etc: suitably covered with biodegradable transparent polythene and packed in wooden cage: bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suitable dimensions made out of wooden strips of 20x100mm size. gap between each strip should not be more then 100mm. the material used for product packaging shall be eco-friendly.a list should be pasted on each wooden cage showing order no, pl no, description of the item, drg. no/ spec. no ,qty, firm's name &address and date of despatch etc. note-1.the item &its packing shall carry a qr code(optional) containing thedetails as listed below (qr code(optional) to be affixed near name plate of item &on top ofpacking) a)name of the manufacturer b)purchaseorder number c)purchaseorder date d)uniqueserial number (or lot number for bulk items) of the manufacturer or e)dateof manufacture f)deliverychallan no. g)deliverychallan date 2.the qr code(optional) shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. 3.in case the above details are not available, or the qr code(optional)s are not readable, the supplied material is liable to be rejected. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45731231

06 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of smoke detector unit for power car, as per drawing: edts087, rev-b, corr 1&2 with rcf annexure -br-01, packing instruction: alternator,rru, erru &accessories, transformer,bulk inverters , battery, charger, self priming monoblock pump, inverter, change over control box etc: suitably covered with biodegradable transparent polythene and packed in wooden cage: bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suitable dimensions made out of wooden strips of 20x100mm size. gap between each strip should not be more then 100mm. the material used for product packaging shall be eco-friendly.a list should be pasted on each wooden cage showing order no, pl no, description ofthe item, drg. no/ spec. no ,qty, firm's name &address and date of despatch etc. note- 1)firms have option to provide qr code. for linkage of po, the cardboard box shall carrya qr code having details as listed below: a) name of the manufacturer b) purchaseorder number c) purchaseorder date d) uniqueserial number (or lot number for bulk items) of the manufacturer or e) dateof manufacture f) deliverychallan no. g) deliverychallan date 2.the qr code shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. [ warranty period: 30 months after the dateof delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45471183

15 Jul, 2026 NA

Jabalpur - Madhya Pradesh

Tender For corrigendum : automatic hygiene odour control dispensor as per rdso specification no. rdso/2008/cg-12. one set consisting of four items 1) automatic hygiene odour control dispensor as per rdso specification no. rdso/2008/cg 12 qty 01 no. 2) stainless steel anti theft cage for automatic hygiene & odour control dispensor qty-01 no. 3. cage lock-01 no. 4. suitable battery. note- design of antitheft cage should be approve from consignee before supply. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45743935

15 Jul, 2026 NA

Jabalpur - Madhya Pradesh

Tender For automatic hygiene odour control dispensor as per rdso specification no. rdso/2008/cg-12. one set consisting of four items 1) automatic hygiene odour control dispensor as per rdso specification no. rdso/2008/cg 12 qty 01 no. 2) stainless steel anti theft cage for automatic hygiene & odour control dispensor qty-01 no. 3. cage lock-01 no. 4. suitable battery. note- design of antitheft cage should be approve from consignee before supply. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45716879

20 Jul, 2026 28.00 Lacs

Bangalore - Karnataka

Tender For tender for supply of electronic components - transformer smd , 16 pin 10/100 base-tx , soic-16 , -40 to +85 deg. c , emi shield , smd , 2 piece , size (16.50x16.50x3.60) mm lxwxh , cover for smd emi shield , size (16.50x16.5x3.6) mm , battery holder for cr2 battery , ultra cr2 lithium / manganese dioxide battery , 3v , 0.3 ohm at 1khz , lithium battery , 3 v , 20 mm dia , miscellaneous , pc card ejector , sfp cage connector & assembly , through hole , right angle , standard surface mount emi shield perforated , 2 piece , size(26.21 mm x 26.21 mm x 5.08 mm) lxwxh , emi shield cover 1.032inchx1.032inch , standard surface mount emi shield perforated , 2 piece , size (38.1 mm x 25.4 mm x 6 mm) lxwxh , emi shield cover 1.500 inch x1.000 inch , standard surface mount emi shield perforated , 1 piece , size (13.66 mm x 12.10 mm x 2.54 mm) lxwxh , dc-dc convertor , i/p 35-75vdc , o/p 12v , 25a , quarter- brick size , spring steel clip device , fixing clamp (tophx esip-7c) , lc display module , 16 charactors , 2 line 3.3v dc , temp -20 to + 70 degree c , 5 v , graphic lcd module , -10 to +60 deg. c

CTN :45666220

03 Jul, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of soldering kit with assy , cage drone frame 3.5 inch , cable wires for 3.5 inch cage drone , battery for 3.5 inch cage drone , drone stand , battery chargers , 3.5 inch fpv , 8 inch fpv , octacopter agnibaan fuze , unmanned ground vehicle , aio stack , speedybee motor 1950kv , speedybee tx800 analog vtx , speedybee high gain antenna , geprc and elrs , 3.5 inch propeller , cadex analog camera , 4 cell battery , moli cell , air unit 5 inch drone camera , 5 inch propellers set , soldering mat , multi meter , hex driver set , propeller nut tool , precision tweezers , wire cutter

CTN :45655569

08 Jul, 2026 NA

Bokaro - Jharkhand

Tender For supply of spares of ash slurry pump, drain sump pump , seal water pump of boiler 9 and dredge pump of tpp and cpp boiler - ash slurry pump, model: ar 300/550earlier pump serial no. : 15206-15208, cat. no. 09000512014 bearing housing material: is 210 fg 260part no. 3, cat. no. 0900051201 end cover (bearing cap outer) material: is 210 fg 260part no. 5, cat. no. 09000512012 expeller housing material: alloy cr (280-320 bhn) part no. 9, cat. no. 09000512013 expellermaterial: nihard type iv (550 bhn)part no. 14, cat. no. 09000512005 labyrinth (pump end)material: astm a 743 cf8part no. 14p, cat. no. 09000512006 labyrinth (drive end)material: astm a 216 gr wcbpart no. 14d, cat. no. 09000512017 lantern restrictor material: astm a 743 cf8mpart no. 13, cat. no. 09000512015 flange (suction cover)material: astm a 216 gr wcbpart no. 70, cat. no. 09000512026 grease retainermaterial: is 210 fg 260part no. 7, cat. no. 09000512027 split glandmaterial: astm a 216 gt.wcbpart no. 10, cat. no. 09000512004 piston ring (01 set = 04 nos.)material: is 210 fg 260part no. 51, cat. no. 09000512018 suction cover material: astm a 216 gr. wcbpart no. 21, cat. no. 09000512008 wear plate (s.side) with insert material: nihard type iv (550 bhn) part no. 19, 19i, cat. no. 09000512007 wear plate (b.side) with insertmaterial: nihard type iv (550 bhn)part no. 16, 16i, cat. no. 09000512001 shaft sleeve material: astm a 743 ca 15 part no. 12, cat. no. 09000512002 impeller with nut & boltmaterial: nihard type iv (550 bhn) part no. 18 & 38, cat. no. 09000512009 outer casing setouter casing top - 01 no.outer casing bottom - 01 no.material: astm a 216 gr. wcb part no. 20 & 15, cat. no. 09000512029 vary pitch pulley assembly (5 grooves)material: is 210 fg 260, overflow drain pump, model : vg 80/250+arsearlier pump serial no. : 15221-15222, cat. no. 09000510012 bearing cap-i (bottom)material: is 210 fg 260part no. 37.052, cat. no. 09000510003 bearing housing (top) material: is 210 fg 260part no. 36.052, cat. no. 09000510005 bearing cap i (top)material: is 210 fg 260part no. 37.053, cat. no. 09000510013 oil seal material: syn rubberpart no. 92.152, cat. no. 09000510004 bearing housing (bottom)material: is 210 fg 260part no. 36.053, cat. no. 09000510011 lantern ringmaterial: bs 970 en8part no. 46.10, cat. no. 09000510017 gland ringmaterial: ls 318 gt. ltb 2 part no. 46.9, cat. no. 09000510002 single shaftmaterial: bs 970 en8part no. 22.352, cat. no. 09000510014 strainermaterial: is 1239 part i heavy part no. 63.03, cat. no. 09000510010 shaft sleeve (p.end)material: aisi 410part no. 53.5, cat. no. 09000510001 impellermaterial: 27% hichromepart no. 24.2, cat. no. 09000510016 wear platematerial: 27% hichromepart no. 14.7, cat. no. 09000510008 bush housingmaterial: is 210 fg 260part no. 17.3, cat. no. 09000510006 bearing bedmaterial: is 210 fg 260part no. 35.152, seal water pump, model : tch+n 25/180-iearlier pump serial no. : 16882-16883, cat. no. 09000511009 shaft sleeve (p.end)material: aisi-410part no. 53.6, cat. no. 09000511007 lantern ringmaterial: aisi 410part no. 46.10, cat. no. 09000511015 gland split material: is 210 fg 260part no. 46.4, cat. no. 09000511013 oil seal set (pump and drive end) material: synthetic rubberpart no. 43.13, 43.3, cat. no. 09000511004 bearing adopter material: is 210 fg 260 part no. 37.21, cat. no. 09000511003 bearing housing material: is 210 fg 260part no. 36.7, cat. no. 09000511010 helicoil insertmaterial: aisi-316part no. 94.21, cat. no. 09000511005 deflector ringmaterial: aisi 304part no. 51.9, cat. no. 09000511001 impellermaterial: is 210 fg 260part no. 24.2, cat. no. 09000511002 pump shaft material: bs 970 en8 part no. 22.3, cat. no. 09000511011 stuffing box covermaterial: is 210 fg 260part no. 17.3, drain sump pump, model: vo 80/250+arsearlier pump serial no. 16522-16528, cat. no. 09000510101 bearing bed material: is 210 fg 260part no. 35.152, cat. no. 09000510102 ratchet collar material: ls 2062 ms part no. 53.852, cat. no. 0

CTN :45605518

30 Jun, 2026 18.98 Lacs

Jhalawar - Rajasthan

Tender For supply of spares for m/s weir minerals make pumps installed in bottom ash handling system of 2x600 mw, katpp, rvun, jhalawar. - bearing assembly (refer drg. k3-110-0-400655) , piston ring , bearing seal , labyrinth , labyrinth drive end , volute liner seal , shaft sleeve o ring , discharge joint ring , intake joint ring , shaft sleeve , lantern restrictor , gland , stuffing box , seal ring , impeller o-ring , shaft spacer , shaft , impeller , bearing housing , end cover , end cover drive end , end cover gasket , end cover set screw , frame plate liner stud , frame plate (d21) body casing inner

CTN :45600345

30 Jun, 2026 18.98 Lacs

Jhalrapatan - Rajasthan

Tender For supply of spares for m/s weir minerals make pumps installed in bottom ash handling system of 2x600 mw, katpp, rvun, jhalawar.- piston ring , bearing seal, , labyrinth, , labyrinth drive end, , volute liner seal, , shaft sleeve o ring, , discharge joint ring, , intake joint ring, , shaft sleeve, , lantern restrictor, , gland, , stuffing box, , seal ring, , impeller o-ring, , shaft spacer, , shaft, , impeller, , bearing housing, , end cover, , end cover drive end, , end cover gasket, , end cover set screw, , frame plate liner stud, , frame plate (d21) body casing inner, , gures

Lantern Restrictor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector