Latest laser cutting machine Tenders | Government laser cutting machine Tenders

corporations/Associations/Others

CTN :45033657

20 May, 2026 35.17 Lacs

Jhansi - Uttar Pradesh

Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars

CTN :45049295

13 May, 2026 NA

Kharagpur - West Bengal

Tender For supply of neutral insert with 8 cutting edges. drawing no. : m/s. sandvik's part no. lnux-191940-pm 4215 or m/s. widia's part no. lnux 191940 db-tn2000 or m/s ceratizit part no. lnux 191940 sn-r74 grade ctcp125. matl.& specn : as per drawing / part no. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45024482

19 May, 2026 NA

Coimbatore - Tamil Nadu

Tender For supply of cold rolled soft iron flat of length 2000 mm (+5mm/-0mm), breadth 38.18mm/37.987mm, thickness 6.40mm/6.27mm for heel piece of special type q relay as per description no.d.210110-00-08 of s and t workshop, podanur. the flats shall have smooth flat surfaces with square edges. the sides/cutting edges should be square and shall not be taper. [ warranty period: 30 months after the date of delivery ]

CTN :45014151

21 May, 2026 NA

Howrah - West Bengal

Tender For supply of neutral insert with 8 cutting edges. drawing no. : m/s. sandvik's part no. lnux-191940-pm 4215 or m/s. widia's part no. lnux 191940 db-tn2000 or m/s ceratizit part no. lnux 191940 sn-r74 grade ctcp125. matl.& specn : as per drawing / part no. [ warranty period: 30 months after the date of delivery ]

CTN :44969981

06 May, 2026 NA

Medak - Telangana

Tender For supply of telescopic mirror, p. no. 4-07007 for new 3 axis laser cutting machine , deflecting mirror, p. no. 4- 11018 for 3 axis laser cutting machine, ofmk no. 4256 , deflecting mirror r= 100 mmr replacement for part no: 4-11017. new bystronic part no: 10046088 , end mirror, p. no. 4-08317 for new laser cutting machine

Central Government/Public Sector

CTN :43711447

28 Apr, 2026 NA

Haridwar - Uttarakhand

Tender For bid to ras corrigendum : supply of cnc laser cutting machine

Central Government/Public Sector

CTN :44950482

01 May, 2026 1.36 Lacs

Sonbhadra - Uttar Pradesh

Tender For offloading the work of fabrication and fitment of cutting edges of bg 825 motor grader of krishnashila project on as when required basis for a period of 365 days .

Central Government/Public Sector

CTN :44896116

20 May, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply of cutting plotter etc e e - cutting plotter for pattern for footwear and goods , manual hand press machine for metal snap, rivet, eyelet with die set , spray applicator for water-based adhesive with suction table , manual embossing machine for small leather goods , polishing machine with double side vertical brush for leather goods , manual inking machine for edges with conical inking roller , heat press machine

State Government

CTN :44932495

28 Apr, 2026 9.9 Thousand

Agra - Uttar Pradesh

Tender For providing of operation and maintenance of substation - repairing of isolator mom box 05 nos. situated in 132 kv switchyard at 220 kv s/s bah including work of fixing size of 100×1350 mm 18 swg ms sheet shall be welded to be outside surrounding area and 55×75 mm extra support frame side of bottom of the box by welding the hings on boxes doors are to be replaced by cutting and welding door edges where damage by rust shall be repaired by fresh sheet of gi sheet, latching arrangement to be provided on box by new latch and socket. old rubber beeding be completing removed from box doors and replaced with new rubber beeding then boxes shall be printed on outside with one coat red oxide primer and one coat smoke gray paint, etc.

CTN :44912741

22 Apr, 2026 NA

Howrah - West Bengal

Tender For supply of neutral insert with 8 cutting edges. drawing no.: m/s. sandviks part no. lnux-191940-p m 4215 or m/s. widias part no. lnux 191940 db-tn2000 or m/s. ceratizit part no. lnux 191940 sn-r74 grade ctcp125. matl. spec. : as per drawing / part no. [ warranty period: 30 months after the date of delivery ]

Laser Cutting Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government