Latest lathe chuck Tenders | Government lathe chuck Tenders

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

CTN :44380208

24 Jun, 2026 NA

Nagpur - Maharashtra

Tender For bid to ras corrigendum : providing of custom bid for services - repair and service of oj6546 mas stroj import cnc lathe mac hines kessler spindle unit scope of works is as per annex ure enclosed

Central Government/Public Sector

CTN :45637844

25 Jun, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - melting 98050114 ms melting scrap released from assorted unserviceable rolling stock, coach, loco, p-way, track fitting & workshop items consisting of pivot pin covers, pick axle, bar claw, p-way keys, lg gate gear wheel, tools (keys, pliers, screwdrivers, gauges, vices, vernier calipers etc.), dog spikes, rail clips, rail tensor, rail trolley parts, fish plates, joggle plates, perforated/ms plates, steel pattis, channel sleeper fittings, t-head bolts, nut bolts, screws, clamps, washers, cotter pins, coupling links/rods, shaku coupler parts, draft gear, draft key, draft yoke, draft hook, draw bar, draw hook beam, screw coupling, buffer spindle, spring loaded buffers, bd gear parts, bogie bolster, bolster hangers, hanger blocks, suspension pins, laminated/leaf springs, traction links/levers, traction motor pinion parts, gears, gear box, bearing cartridges, ctrb, taper roller bearings, axle box rings/front covers, equalising stay rods, anchor links, anti-roll bar brackets, suspension tubes, labyrinth rings, locking rods, point m/c parts, junction boxes, base plates, face plates, stiffener plates, heavy brackets, anti-falling rods, adjusters, rra adjusters, tensioning device assly., tensioning rods, hook clamps, cst items, drill bits, jacks, lathe m/c chuck, motor coach rear covers, motor coach collar, icf collar/caps/end caps, securing cup/end caps, roller bearing rings, axle box rings, rail screws, off-size bolts, chamfering kits, weigh watt blocks, cylinders, plunger assly., draw gear items, t&p items, melting scrap, moped trolley parts, lockers, steel almirahs/cabinets, tables, benches, racks, iron cots/stands, battery/location boxes, poles, electrical panels, high mast towers, glow sign boards, hydraulic rail tensor/creep adjuster/joint straightener, hydraulic jack slewing m/c, portable winch rail loader, sleeper carrier equipment, track m/c spare parts and other miscellaneous ferrous scrap with minor nf/rubber attachments. material mixed, rusted, broken, worn out, grease/oil affected, unserviceable and ber, sold on %u201cas is where is%u201d basis, loading by purchaser,. custodian: dms/scrap/pardi.

CTN :45617678

29 Jun, 2026 NA

Tinsukia - Assam

Tender For providing of custom bid for services - procurement of 01 x lathe and cnc machine (working area 1300x2500x200, spindle 6kw aircooled, motor drive easy survo, controller nk 105g2/dsp a11, side rotary attachment 150mm huck 1800 length, rail guid 20mm automatic lubri..

CTN :45605519

23 Jun, 2026 4.87 Lacs

Baran - Rajasthan

Tender For requirement of champion make machine spares for workshop installed at chp,ctpp,chhabra - norton gear box , apron box with worm set , thread chart , lathe machine(model c-600) , tool post with bolts(set of 8) , thread chart , hydraulic pump set , coolant system with assembly , magnetic attachment , tool & cutter grinder , magnetic attachment , universal vice (3 axis)-size 4" , drill machine , adjustment pin set , tension spring set , arbor set(sleve/socket set) , drill chuck , shaping machine , (model: 24"medium stroke) , slotted crank block , pinion gear set , main machine gear(crank gear) , slotted arm/slotted lever , main head stock spindle shaft , rev./forward gear set with assembly unit , drum pulley , counter pulley , tool post with bolts(set of 8) , thread chart

Central Government/Public Sector

CTN :43564213

16 Jun, 2026 NA

Koraput - Odisha

Tender For bid to ras corrigendum : supply of vertical turret lathe with special attachment ( live spindle)

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

Central Government/Public Sector

CTN :43942946

10 Jun, 2026 NA

Haridwar - Uttarakhand

Tender For bid to ras bid to ras bid to ras bid to ras corrigendum : supply of gear coupling male as per drg no 04 dash06 dash020 , drg 04 dash06 dash021 rev gear couplingfemaleas per drawing no 04 dash06 dash021 , drg 04 dash06 dash022 rev bibby couplinghalf for gear box output shaft and main motor of vtb 2 5a as per drawing , drg 04 dash06 dash022 sheet 2 rev bibby coupling half for main gear box motor side vtb 2 5b machine as per drawing 04 dash06 dash022 sheet 2 , coupling for wd 200 machine as per drawing 04 dash07 dash005 , drg04dash14dash065sheet1and 2revcoupling of rapid motor for carriage sr 2000 part iandii with coupling gear of rapid motor for carriage sr 2000 , drg 04 dash33 dash029 r1 rev spline coupling for column feed motor as per drawing 04 dash33 dash029 r1 , drg 04 dash33 dash080 rev coupling for upper saddle gear box as per drawing 04 dash33 dash080 , drg 04 dash34 dash004 and 04 dash34 dash008 rev coupling for main motor as per drawing 04 dash34 dash004 and 04 dash34 dash 008 , retainig plate drg no 04 dash37 dash013 , spring to drg no 04 dash37 dash013 , drg 04 dash37 dash55, sheet dash1 rev coupling male for chuck as per drg , drg 04 dash37 dash55, sheet dash2 rev coupling female of chuck as per drg , drg 04dash 43dash007 r1 rev bearing housing for beco lathe , drg 04 dash45 dash006 rev coupling of rotary tables as per drg , drg 04 dash53 dash013 rev coupling for feed shaft as per drawing 04 dash53 dash013 , drg 06 dash01 dash006 and 06 dash01 dash007 rev arbor with nut for milling machine as per drawing 06 dash01 dash 006 and 06 dash01 dash007 , drg 06 dash01 dash016 rev coupling half for spindle gear box of batli boi as per drawing 06 dash01 dash016 , drg 06 dash01 dash017 rev coupling half with pin for spindle gear box of batli boi as per drawing 06 dash01 dash017 , drg 06 dash01 dash027 rev coupling half of main motor of batli boi as per drawing 06 dash01 dash027 , drg 06 dash16 dash001 rev coupling for creep testing machine as per drawing 06 dash16 dash001 , drg 06 dash04 dash15 r0 rev jaw as per drg

CTN :45430790

18 Jun, 2026 NA

Ariyalur - Tamil Nadu

Tender For supply of mechanical engineering lab materials - mechanical engineering lab materials, serve motor drive kitinterface l293d motor driver ic with arduino to control direction of rotation of two dc motors), bldc motor kitbldc motor 1 nobldc motor drive -1noinbuilt volt and ammeter and rpm meterinbuilt power supplyinput 230v ac, lvdt trainer kit complete educational trainer for linear variable differential transformer (lvdt) displacement measurement. built-in ac excitation source and signal conditioning circuitry for lvdt operation. micrometer assembly for precise linear movement of the lvdt core. displacement range ~10 mm with clear front-panel adjustments for zero & calibration. digital display (typically 3 -digit) for direct readout of conditioned output/displacement values. test points and banana sockets for signal observation on external instruments. self-contained unit in a durable enclosure with labeled controls and educational layout. includes user manual and patch cords for experiments. operates on 230 v ac, 50 hz mains supply., multi-cylinder petrolphase : single phase load: mechanical load with ropenumber of cylinders : 4displacement : rope brakepower : 65hp,4000 rpm,1396 ccbrand material : mild steelengine type : 4 stroke self startfrequency : 15hzfuel consumption : petrolfuel tank capacity : 5 letermorh s test rig, tail stock assemblyheavy-duty lathe tailstock assembly for training; cast iron body with base, barrel (quill) ~50 75 mm stroke, hand wheel feed, dead centre mt2/mt3, set over screws for taper turning, spindle clamp, complete with all internal parts for dismantling and reassembly; suitable for 300 400 mm centre height training lathe., dc motorvoltage 220-440 v dcpower - 180 w speed - 200 rpm, hydraulic cylinderdouble acting hydraulic cylinder, bore 40 50 mm, stroke 200 300 mm, working pressure up to 100 160 bar, steel tube with honed bore, hard chromed piston rod, front & rear end caps, piston with seals and wear rings. supplied as standalone unit with suitable mounting for dismantling, inspection and reassembly., hydraulic opreated directional control valve (dcv)manually operated 3/2 or 4/2 way spool type hydraulic directional control valve, nominal size ng06 (cetop 3) or equivalent, rated pressure 210 bar, flow 20 40 lpm; valve body with hardened and ground spool, centering springs, ports p a b t clearly marked. supplied on small mounting plate for dismantling, inspection and assembly practice., bearing with shaft assemblyteaching unit with shaft 25 35 mm dia mounted in housing with deep groove ball bearings (6205 / 6206 class) at both ends; includes locking arrangements (circlips, lock nuts, covers). designed for repeated removal, cleaning, lubrication and refitting of bearings, with provision to mount on bench or test rig., coupling unit using driving and driven shaft plumber block bearing unit1. the plummer block housingmaterial: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing).sealing: felt seals or v-ring seals (to demonstrate lubrication retention).lubrication: provided with a grease nipple at the top center for manual lubrication practice.2. the bearingtype: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series).bore diameter: standard 25mm or 30 mm (ideal for lab scale).mounting: adapter sleeve mounting (h-series) to teach students how to lock a bearing onto a smooth shaft.3. shafting and couplingshaft material: ground carbon steel (en8 or en9) for high surface finish.coupling type: * flexible coupling: to demonstrate the bearings ability to handle slight misalignment.rigid flange coupling: to demonstrate traditional direct connection.driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., spring test machine load & displacement sensing load cel * capacity: 0 10 kno accuracy: 1% fs (better if 0.5% fs) displacement sensor * lvdt / digital encodero accur

Central Government And Public Sector

CTN :45400984

09 Jun, 2026 NA

Multi City - Punjab

Tender For auction sale of depot miscellaneous scrap - scrap old condemned various types of machinery such as (1) batery operated scissor (mw-1420), (2) hot & cold for cleaning (mw-1396) (3) electric brazing machine (mw-1431), (4) welding set (mw=1175,1281 & 1202), (5) hydrulic press 50 ton (mw 775), (6) fuel injection test equipment with accessories (mw-564) , (7) cnc stud turning machine (mw-1144),& cnc centre lathe machine, (8) hand operated hydraulic pallet (mw-772 & 773), (9) twin spindle cnc chucker (mw-1138) to pl no-98321006

Lathe Chuck Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector