Get complete information related to latest Lattice Structure Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Lattice Structure Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Lattice Structure Tenders.
Tender For supply and commissioning of high current injection kit (1500a),i/p-230v,1 phase,20a(0- 5v), 1500 amps dc, with necessary display arrangements and milli volt measuring arrangement for 4 digits as per technical specification attached. make: technomax/ slazer/ megger/ vividmetrawatt/gte/premier engineers/ajit or power guard only. the item must be in sheet steel enclosure, in proper cooled construction suitable for indoor use in maximum atmospheric temperature of 45 degree centigrade. note: 1) firm should submit authorised dealership certificate along with tender otherwise offer will not be considered. 2) item to be supplied along with warranty certificate.
Tender For armo 2024-25 works, sh: miscellaneous repair and service of pumps, painting and supply of day to day spares etc at hubballi airport, hubballi. - sh : 1 painting of lt panel, feeder pillers and light poles painting of electrical lt indoor,outdoor panels, fire hydrant boxes, exposed fire hydrant pipe line, diesel pipe line, exposed water, pumps, earth pit covers etc located in powerhouse, ac plant, switch rooms, fire pump room, pump room etc., with one or more coats of spray painting with synthatic enamel paint of approved brand and manufacturer to give an even shade, including cleaning of surface with detergent etc, of required color to give an even shade complete as required. painting of street light poles of 7 mtr height and approx with one or more coats of spray painting with synthatic enamel paint of approved brand and manufacturer to give an even shade, including cleaning of surface with detergent etc , of required color to give an even shade complete as required. painting of street light poles of 5 mtr height and approx with one or more coats of spray painting with synthatic enamel paint of approved brand and manufacturer to give an even shade, including cleaning of surface with detergent etc , of required color to give an even shade complete as required. painting of street light poles of 3ft height and approx with one or more coats of spray painting with synthatic enamel paint of approved brand and manufacturer to give an even shade, including cleaning of surface with detergent etc , of required color to give an even shade complete as required. sh:- 2 servicing of grundfose make hydro pneumatic water pumping system:- "servicing of hydro pneumatic water pumping system through oem or its authorized dealersdation as and when required basis including periodical, preventive and breakdown maintenance of the system, repair/ replacement of all defective parts and other associated accessories and electrical parts upto incoming power supply at different locations excluding supply of spare parts, complete as required to keep the equipment in serviceable condition as per aai special conditions and as per eic instructions. make: grundfose, model: hydro mpc 2 x cr 10-6" supplying of following spares suitable for existing hydro pneumatic water pumping system make: grundfose, model: hydro mpc 2 x cr 10-6 asper oem recommendations, as and when required basis at site complete as required asper aai special conditions and as per eic instructions. "1 gfs kit, chamber stack cr 10-6, (item code 96508408)" "gfs-spr-kit, shaft seal h qqegg, (item code 96511844)" "gfs io351b module digital/ analog, (item code 95042368)" "gfs spare,multi pump control(cu352) (item code 98288809)" pressure transmitter "gfs gt-d300 pn10 g1 1/4 v,(pressure tank) (item code 96528347)" sub head-3: supply of spares supply of 16a 3 pin plug top suitable for 230 volts,50 hz, ac system as per site requirement and aai approved make, sample.model :- anchor roma or equivalent. supply of 6a 3 pin plug top suitable for 230 volts,50 hz, ac system as per site requirement and aai approved make, sample.model :- anchor roma or equivalent. supply of 6a modular switch roma plus for operation on 230 volts,50 hz, ac system as per site requirement and aai approved make, sample.model :- roma plus or equivalent. supply of 6a modular socket for operation on 230 volts,50 hz, ac system as per site requirement and aai approved make, sample.model :- anchor roma or equivalent. supply of 6/16a modularl socket roma plus for operation on 230 volts,50 hz, ac system as per site requirement and aai approved make, sample.model :- anchor roma or equivalent. supply of 16a modular switch roma plus for operation on 230 volts,50 hz, ac system as per site requirement and aai approved make, sample.model :- anchor roma plus or equivalent. supply of 16a modular switch suitable for operation on 230 volts,50 hz, ac system as per site requirement and aai approved make, sample.model :- anchor roma or equivalent. "su
Tender For procurement of electrical materials for 5th floor classroom expansion,nims,hyderabad - supply and transportation of 20w +/-10%, >/ 2000 lumens, 1200mm length led retro tube light, housing made with alluminium anodised body, wide operating voltage with double side connection, pf?0.9, surge protection: > 2kv, thd<15%, with inbuilt driver and frosted cover cct: 3000k -6500k as desired by the department and as per is specifications, minimum cri?80,.etccomplete with 5 years warranty with bis, 1060 elec- 5.1.1 supply, transportation of energy efficient fan,1200 mm sweep, aluminium body, consuming, 28 w, bee 5 star rated, ceiling fan with brush, less direct current (bldc) motor, class of, insulation: b, 3 no's blades, 30 cm long down, rod, 2 no's canopies, shackle'kit, copper, winding, power factor greater than 0.90,, service value (cmmav) greater than 8.0, air, delivery minimum 235 cmm, 350 rpm(, tolerance as per is:374-2019), thd less than, 10%. with remote or compatible to electronic, step type regulator unit for speed control and, all remaining accessories including safety pin,, nut bolts, washers, temperature, rise=75c(max), insulation resistance more, than 2 mega ohm, suitable for 230v, 50 hz,, single phase ac supply, earthing etc., including, all standard accessories etc., complete., makes : atomberg (efficio ) / havells / orient /, halonix / crompton, 1 no 3085.00, elec-5.1.16 supply of ------------------------, 900 rpm heavy, duty exhaust fan with metallic blades., makes : crompton / almonard / havells turbo, force sp., 1078 a 12" (300mm) 1 no 3410.00, 1844 elec-, 10.1.20, 12 / 15 ms plain rod fan hook 1 no 44.00, 1853 elec-, 10.1.29, tw / pvc round blocks 1 no 9.00, elec-1.9.1 supply of --------------------------------------, makes : legrand arteor / schneider zen celo 339 a 6 / 10a 1 way 1 module modular switch 1 no 130.00, elec-1.9.1 supply of --------------------------------------, makes : legrand arteor / schneider zen celo 342 d 6 / 10a 3/2 pin 2 module modular socket with shutter.1 no 195.00, elec-1.9.1 supply of --------------------------------------, makes : legrand arteor / schneider zen celo 346 h 16a / 20a 1 way 1 module modular switch. 1 no 170.00, elec-1.9.1 supply of --------------------------------------, makes : legrand arteor / schneider zen celo 350 l 16a / 6a 1 way 2 module combi socket modular socket with shutter.1 no 270.00, elec-1.5.1 supply of --------------------frlsh / hffr pvc insulated 1100v grade as per is:694 / 2010, is17048 specification for copper cable.makes : finolex / rr kabel / havells 155 a 1.5 sqmm 100 mtrs 2410.00, elec-1.5.1 supply of --------------------frlsh / hffr pvc insulated 1100v grade as per is:694 / 2010, is17048 specification for copper cable.makes : finolex / rr kabel / havells 156 b 2.5 sqmm 100 mtrs 3900.00, elec-1.5.1 supply of --------------------frlsh / hffr pvc insulated 1100v grade as per is:694 / 2010, is17048 specification for copper cable.makes : finolex / rr kabel / havells 157 c 4.0 sqmm 100 mtrs 5950.00, elec-1.5.1 supply of --------------------frlsh / hffr pvc insulated 1100v grade as per is:694 / 2010, is17048 specification for copper cable.makes : finolex / rr kabel / havells 159 e 10.0 sqmm 100 mtrs 14535.00, supply of --708 d (8+24) 8 way tpn db horizontal with ip 43,, 24 nos--- protection as per is:13032 and suitable for ---------------s.p. out goings and for 1 no 4 pole incomer (fp isolator / mcb) with 100 a tinned copper busbar, neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar,profile blanking modules for unused mcbways, din bars and detachable gland plate etc complete with inter connections.makes : legrand / schneider /, 1 no 7560.00, elec-1.2.5 supply of --------------- width and height casing and caping with all accessories such as ts,bends, elbows etc., complete for finished item, of work.makes : modi with isi 76 b 25mm x 12 mm and thickness 1.2 mm 1 mtr 40.00, elec-1.2.5 supply of --------------- width and heigh
Tender For prcourement of spares for 30 mm medak gun - item, protection box kp-25, power supply unit, control and switching unit by-25-2c, power supply filter, unit mh-1 with cord of 1.2 mtr -device mt-2, ball plastic wii-2, limit switch, spring helical compression- c5064, valve, dome lamp, cable assy-1, sear stop
Tender For supply of item name:- vcb trolley make - cg power and industrial solutions limited (mv switchgear division) panel type - jvac rated voltage - 11000 v, mechanism: trip-free, breaking capacity - 25 ka @ 11 kv, short time rating(str) - 25 ka for 3 sec, ct primary current - 800 amp., bus-bar current - 1250 amp., mechanism - motor operated spring charged, closing coil - 110 v dc, indication circuit - 110 v dc, trippin g coil - 110 v dc, panel space heater - 230 v ac, spring charge motor - 230 v ac, frequency - 50 hz, draw ing no.: vs9260-z-21, w/o no. - v9260,make-cg power and industrial solutions limited (mv switchgear div ision) [ warranty period: 30 months after the date of delivery ]
Tender For supply of decorative outdoor waterproof gate light weather-resistant post top lamp for main gate 4 0 watt, garden, balcony, driveway with durable build for home exterior lighting (without bulb), colour: bl ack, material: metal, style: gl flower, light fixture form: path, material & color: metal (black) & glass (whit e), maximum wattage support: upto 40-watt, cap type: b22- inbuilt holder, weatherproof & durable desig n ? built to withstand rain, wind, and sun, this gate light ensures long-lasting performance in all outdoor co nditions, easy installation & low maintenance ? hassle-free setup with minimal upkeep makes this gate ligh t a convenient solution for homeowners, product dimensions: 17.7l x 17.7w x 20.3h centimeters, indoor/o utdoor usage: outdoor, power source: ac, installation type: flush mount, control method: touch, light sou rce type: led, voltage: 220 volts (ac), item weight: 0.5 kilograms, switch style: push button, switch instal lation type: monopoint, eu energy efficiency label: 2.5 lumens per watt,luminous flux: 100 lumen, colour temperature:2700 kelvin as per product (enclosed in document section) of make whiteray or similar make. [ warranty period: 30 months after the date of delivery ]
Tender For supply and installation of biotechnology instruments - bod incubator with stabilizer:- features available in bod incubator - toughened glass window ,air circulation fan ,removable tray ,temperature,sensor ,door hinges ,pid temperature controller. 2 optional features available in bodincubator stainless steel perforated trays no of trays 3 air circulation motorized blowerexterior body material mild steel and painted in epoxy powder coating insulation material glass woolouter door material mild steel inner door material material of removable traytoughed glass material of removable tray stainless steel wire mesh tray chamber capacity(in ltr) 250-299 thickness of sheet (in mm ) 0.7 thickness of toughed glass/acrylic sheet (in mm ) 7 diameter of stainless steel wire in mesh ( in mm )3 temperature range 10 c to 70 c temperature accuracy 0.5 ctemperature uniformity 1 c., cooling centrifuge 20000 rpm with rotator head and stablizer :- type of motor brushless(without carbons)type of lid lock both manual and electronicno of acceleration and deceleration profiles in built for rotor speed while automatic brakingoption to accelerate and decelerate speed at various rates configuration of rotor supplied with centrifuge machine angle rotorsize of rotor supplied with centrifuge in ml"12x15ml(for angle rotor) rpm 13000"warranty period for equipment & roto condensed water drainage system,the equipment shall be installed and demonstrated before acceptance, servo controller voltage stabilizer supplied with item, deep freezer with stabilizer :- type vertical features puf insulation,frost free capacity ( l) >=250l temperature range in c -10 c to -40 c or better temperature uniformity in degree celsius +/- 3 c or lesstemperature stability of system in degree celsius +/- 3 c, rotatary shekar incubator with stabilizer :- castor wheels ,range of temperature5 degree centigrade to 60 degree centigradetype of display lcd, type of speed controlstepless continuously variable,orbital shaking amplitude in mm25 mm,type of flask which can be accommodated 100 ml ,250 ml ,500 ml ,1000 ml ,2000 ml, interior illumination led bulbs,construction of body double walled with inner and outer walls,door insulated double walled door with glass window,internal length of equipment in mm 765internal width of equipment in mm 660internal height of equipment in mm 650outer length of equipment in mm 1150ouiter width of equipment in mm 800outer height of equipment in mm 1300,range of temperature 5 degree centigrade to 60 degree centigradetemperature accuracy plus minus 0.5 degree centigradetemperature controller microprocessor based digital temperature controller and indicatortype of sensor pt -100,type of motor brushless motorshaking mechanism controller microprocessor controllerorbital shaking speed in rpm upto 250type of speed control stepless continuously variableincrement of step variation 10orbital shaking amplitude in mm 25 mmtimer adjustment in hours 99, autoclave vertical :- chamber capacity/size approx. 80-120 litersoperating pressure 15 - 20 psipressure gauge type analog pressure gauge (0 - 400) psi temperature accuracy +/- 0.5 c (at 121 c)operating temperature (max) 123 c features automatic start/stop timer,low water level heater cut-off and alarms,over pressure cut-off with audio-visual alarm,low heat warning,inner temperatureindicator,over temperature cut-off with audio-visual alarm,door cannot unlock until chamber pressure reaches room pressure,temperature calibrationfunction spares & accessories perforated corrosion free basket made up of ss 304 (3-4 nos) that arestackable two high or more levelsadditional requirement calibration certicate from iso17025 accredited lab for temperature,pressuregauges & timer, heating element multicombine:- power source electric material ceramicapplication heating shape rectangulardimension diameter 200 millimeterwidth 200 millimeter thickness 8 millimeterlength 600 millimeter specications resistance 5 operating power 100 ki
Tender For supply of glass molded blend for break the power 15amp size 5 x 20 mm. capacity of fuse sh ould be mentioned in each fuse. make of of 15amp glass molded fuse - protectron, schurter, cooper bussm ann or similar. item to be supplied as per below description -voltage- 250 v, current rating- 15a, type: gla ss fuse, material: made of glass tube with nickel plated brass end caps fast- acting response to overcurren t conditions, high reliability and accuracy compact design, non-reusable (blows once, requires replacemen t), visible indication of blown state (glass shatters), dimensions- length: 20mm, diameter: 5mm." [ warra nty period: 30 months after the date of delivery ]
Tender For supply,installation and commissioning & maintenance of automatic fire det ection cum suppression system (high pressure water mist system) for lhb power car an d pantry car coaches. note: safety clause must be followed according to annexure-a of dy.cple-ii l.no.rcf/emp/1 dated. 01.04.2025, as per drawing: rdso spec. is/rdso/cg/s/22001 amend-1, packing instruction: as per standard packing. it should be ensured that item shou ld not rub during transportation. the item should be packed with adequate strength. transit damage , if any , shall be at the cost of supplier. [ warranty period: 48 months aft er the date of delivery ]