Latest laundry machine Tenders | Government laundry machine Tenders

CTN :45730766

20 Jul, 2026 NA

Kharagpur - West Bengal

Tender For "maintenance of mechanized laundry machines & equipments at coaching depot, santragachi and operations of laundry machines for washing and packaging of linens" for 03 years.

CTN :45679372

02 Jul, 2026 20.16 Lacs

Delhi - Delhi

Tender For supply and replacement of defective parts of kirloskar make transformers of 1000/750/500 kva capacity at ugc & cag building, new delhi. - supply and fixing of over current earth fourth relay 24 dc l&t make etc complete as reqd. , supply and fixing of 11 kv indoor single phase resin cast current transformer 300/5amp etc complete as reqd., , supply and fixing of transformer 500 kva 11/0.433 kv wt1 scanner & rtd sencer lead., , supply & installation of suitable rating of 500 kva 11/0.433 kv lv bussing porcelain or epoxy-cast resin comply with is-1180 complete as required, , supply and fixing of suitable rating of 500 kva 11/0.433 kv lv flexible porcelain or epoxy-cast resin comply with is-1180 complete as required., , dismantling /loading and unloading of 500kva, 11kv/433volt, 3phase, 50hz, cast resin dry type kirloskar make indoor transformer hv/lv coil/core etc and repair of crack in hv/lv winding/core and putting cast resin/resin hardener, reassembling all the dismantle parts accessories confirming to is 11171 and iec 60076 etc including all tests i.e voltage ratio, magnetic balancing, vector group, ir magnetizing current, winding resistance etc complete as reqd., , supply & installation of 630a vcb vacuum interrupter etc complete as reqd., , sh-2 (old cag bldg), , supply and replacement of 750- 1000 kva transformer oil gas kit etc complete as reqd., , checking in 750-1000 kva transformer all type of protection etc complete as reqd., , supply and replacement of lv bushing oil seal in 750-1000 transformer etc complete as reqd. no.ryb) (4, , supply and replacement of hv bushing oil seal in 750-1000 transformer etc complete as reqd. (3 no. r,y, b), , supply and replacement of off load tape changer in 750-1000 kva transformer etc complete as reqd., , replacement of transformer oil in oltc top-up of main tank etc complete as reqd., transformer oil filtration and dehydration of 750 kva & 1000 kva transformer using high-vacuum oil filtration plant, including removal of moisture, dissolved gases, sludge and impurities from transformer oil, circulation of oil through filtration machine, achieving required bdv value, testing before and after filtration, manpower, tools & tackles, consumables, complete as required at site., , complete servicing, overhauling, cleaning, contact checking, lubrication, insulation resistance testing, contact resistance testing, functional testing and commissioning of oil circuit breaker (ocb), complete as required at site., , supply & installation of male contact, , supply & installation of female contact, , supply & installation of over current earth fault relay, , supply & installation of 24 volt dc power pack unit etc complete as reqd., , supply and fixing of transformer wti relay etc complete as reqd.., , supply and replacement of transformer oti relay etc complete as reqd.., , providing and fixing following rating and breaking capacity and pole mccb with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, ics=100% icu and operational voltage 690v etc. as required., , (make: schneider electric-nsx /siemens / lk/ abb/hager)

CTN :45692588

02 Jul, 2026 16.49 Lacs

Jamtara - Jharkhand

Tender For water treatment plant cleaning,purchasing of equipments for wtp, laying of di pipes and sluice valves, construction of sv chamber and phed esr repairing for jamtara nagar panchayat. - labour for site clearance -do--e/i, desilting the supply well, intake well /head works, sump of water supply /sewerage works etc. in wet or dry condition including lifts upto 9 m and lead upto 150m as required beyond the work site,stacking, spreading, including necessary guarding, etc. complete, as directed by e/i, supplying and laying of rapid sand gravity filter sand, supplying and laying of rapid sand gravity filter gravel, supplying of bamboo for scaffolding works, supplying of narial ropes for binding works submersible pump set, requirement of plumber class-ii for opening & closing of valve & other related works, requirement of electrician grade-ii for making required connections & other related works, hiring of different tools,chain pulley & tackles for cleaning & other works, disposal of excavated earth & filter bed sand, sand (lead 02k+10p=12 km), gravel (22 k.m. lead), tyre coupling (unique 3409-gn tyre coupling for 100hp & 50hp), bosch lithium based grease, graphit gland pack rope 12mm, graphit gland pack rope 16mm, 2.2kw (3hp) foot mounted motor tefc 1500 rpm 3-phase motor for clariflocculator, multi-blade paddles mounted on central shaft driven by foot-mounted geared motor, onload changeover switch 800a,415v, 4 pole, digital voltmeter (0-500v)-3 phase indicator, digital ammeter (0-500a)-3 phase indicator, led indicator lamp or phase light (r/y/b/g), pvc/xlpe insulated pvc sheated heavy duty,armoured lt cable with aluminium conductor voltage upto and including 1100 v, 240sqmm, 3.5 core, 2.5 sqmm isi marked frls pvc insulated, single core copper conductor cable, 1.5 sqmm isi marked frls pvc insulated, single core copper conductor cable, laying of one number pvc insulated and sheated/xlpe power cable of 1.1kv grade of size not exceeding 35sqmm direct in ground including excavation, sand cushioning and refilling the trench, tapered bearing 7316 mcb (large), deep groove ball bearing 6311 mcb (small), chain pulley block hoist 5 tonne, 360 rotation, 3mtr lifting height, pipe wrench, 18 inch taparia adjustable heavy duty pipe wrench, pipe wrench, 14 inch taparia adjustable heavy duty pipe wrench, 1/2" sqaure drive flank drive taparia goti 22mm socket set, 1/2" sqaure drive flank drive taparia goti 20mm socket set, rachet wrench, 18 inch single sided rachet wrench, 1/2 inch drill bit for threading di/ci pipe, tata agrico hammer -dfs- 2.5kg, 6 inch tyton epdm/sbr rubber gasket for 150mm di pipe conforming to is:5382 isi mark, 4 inch tyton epdm/sbr rubber gasket for 100mm di pipe conforming to is:5382 isi mark, 6 inch di end cap flanged type for 150mm di pipe, 4 inch di end cap flanged type for 100mm di pipe, epdm rubber gasket for non-return valve, earthwork in excavation in foundation (as per i.s. 3114/1965 for laying of different types & sizes of pipes) so as to give one meter average cover over the the socket of pipe with disposal of excavated earth within initial lead lift as per specification & direction of e/i (k-7 150mm), earthwork in excavation in foundation (as per i.s. 3114/1965 for laying of different types & sizes of pipes) so as to give one meter average cover over the the socket of pipe with disposal of excavated earth within initial lead lift as per specification & direction of e/i (k-7 100mm), earthwork in excavation in foundation (as per i.s. 3114/1965 for laying of different types & sizes of pipes) so as to give one meter average cover over the the socket of pipe with disposal of excavated earth within initial lead lift as per specification & direction of e/i (k-7 100mm repair), earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches wit

Central Government And Public Sector

CTN :45696206

06 Jul, 2026 52.70 Lacs

Delhi - Delhi

Tender For providing of building materials and execution of the allied works under the work conservation of well area of lahore gate including rampart at red fort - material and work, u. lime katni (in air tight bags), surkhi (free from silt, dust, organic any other foreign material), river course sand (free from silt, dust, organic any other foreign material), gum babool, gur desi, belgiri, jute/sun, lakhori brick (as per site requirements nominal size & specification), brick jeera 6mm (free from clay, organic material), brick aggregate (free from clay, organic material) 20 to 25 mm nominal size, red sand stone thickness 100mm of required size, copper dowel (as per site requirement), red sand stone required (as per site requirement size), red sand stone 50 mm (as per site required size thick for jalie work), red sand stone 40 mm (as per site required size thick undressed for chajja), copper rod 10 mm (as per site requirement), un slaked lime katni (in air tight bags) fine quality, marble dust powder [kg], batasha [kg], araldite [kg], 6 inch dia ballies (6 ft ) [each], ply 12mm thick [m2] water resistant, mud (clay ) [cum] free from impurities, dry uppley [each], planks 50m thick [m2] (well seasoned), jute rope 1 inch [kg], "dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres leaddismantling old lime plaster", demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge.nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix), demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge., painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1 two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture, provision of provising and fixing of galvanised mild steel material xpended material (xpm) jali of 4mm thick silver in clour inluding fixing charges etc complete, "float glass panes 9.7.7.1 4 mm thick glass pane (weight not less than 10kg/sqm)", "providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).9.1.2 sal wood", "providing and fixing factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk s.s screws, all as per direction of engineer-in- charge. (note: stainless steel butt hinges and necessary s.s screws shall be paid separately) 30 mm thick 26.87.1", "providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the rcc structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry :

State Government

CTN :45647458

13 Jul, 2026 35.00 Lacs

Udaipur - Rajasthan

Tender For supply of laundry machine

CTN :45653408

13 Jul, 2026 35.00 Lacs

Udaipur - Rajasthan

Tender For supply of laundry machine

Central Government And Public Sector

CTN :45611549

09 Jul, 2026 NA

East Champaran - Bihar

Tender For supply and application of refractory castable materials and related materials, along with repair and maintenance on door delivery basis at hbl plant sugauli - supply and application of refractory castable materials and related materials, along with repair and maintenance on door delivery basis at hbl plant sugauli, as per the below details and attached tender document:, supply of fire crete super (medium purity dense castable)packaging type: packet, type: 70% alumina castablechemical: al2o3 (68% to 72%), cao (5.2% to 6.2%), fe2o3 (4.8% to 5.5%)nature of bond: hydraulicmax. service temperature: 1450 deg cel. or morepackaging size: 25 kgstate: dry powderedmake: calderys india refractories ltd / trl krosaki refractories limited / dalmia ocl, supply of refractory mortarproduct class: refractory monolithictype: 50% alumina mortar (coarse)chemical: al2o3 (45% to 50%), fe2o3 (3.8% to 4.8%)nature of bond: chemical / ceramicmax. service temperature: 1500 deg cel. or morepackaging size: 25 kgstate: drymake: calderys india refractories ltd. / trl krosaki refractories limited / dalmia ocl, tiles for boiler roof and bank zone side wall (both sides),size: 300 mm 300 mm 50 mm,quantity: 500 nos. (male female),as per the approved sample (sample collection under the supplier s scope)., repairing / replacement of damaged tiles to new tiles (approx. 300 nos)a. boiler bank zone (both sides)b. boiler roof, dismantling of old refractory & application of new castable refractory masonry work as per below scope of works.the broad scope involves complete dismantling and disposal of old refractory material and application of new castable refractory masonry in specified zones. the scope includes, but is not limited to, the following:dismantling of old refractory: removal of damaged, worn-out, or unserviceable old refractory material (brick, castable, insulation, etc.). manual/mechanical chipping and demolition as per site condition. collection, segregation, and safe disposal of dismantled refractory debris to the designated location inside the plant premises as directed by the engineer-in-charge. cleaning and surface preparation of the exposed area for new refractory lining. inspection and reporting of any damages to anchoring systems or structural parts.installation of new castable refractory: supply of new refractory shall be in hbl scope. surface cleaning and preparation prior to refractory application. mixing of castable using approved method (with pan mixer or mechanical mixer) and maintaining required water ratio. application of castable refractory using shuttering/moulds or free hand as per site requirement. compaction using poker vibrators for ensuring proper density and bonding. curing of refractory as per technical data sheet (tds) of the manufacturer minimum 24-48 hours water curing. removal of shuttering, inspection, and touch-up wherever required. final drying and heating-up (if in scope) under supervision of oem/engineer-in-charge., filling of ceramic wool.

CTN :45292178

19 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For bid to ras corrigendum : supply of manual cleaning engineering equipments moping/degreasing thinner cleaning of dry cloth cleaning, sur , hr spray painting of fwd and aft das , fr spray painting of stabilizer, firemain pumps, aux pumps, auxiliary transfer pumps, hp ac hp air b , fr spray painting of fwd mid and aft acs, ref plant, avcat system filtration, hanging tanks, ru tank , fr spray painting of lathe, drilling, bench grinder machine sea chest strainers , hr spray painting of mes and gb , fr spray painting of after steering gear, ventilation cooler frame and coolers , fr spray painting of imcs consoles and battery power back, de/rg/da/ac/cpp control consoles