Latest lavatory module Tenders | Government lavatory module Tenders

Central Government/Public Sector

CTN :45436278

20 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For set of lavatory module for lhb ac2t & ac3t coaches(mdts-133 rev-05, mdts-118 rev-01. follow drg. no. sked-598 for electrical wiring, as per set-list no. lavmod2t&3tmcf version- 07. (note:-the supply of lavatory module is to be done in knockdown condition which can be fully assembled inside the coach (no. of pieces of lavatory module may be increased up to 4 maximum) and height oflavatory module may be 2115+/-10 mm. for achieving height of lavatory module of 2115+/-10 mm, it shall be minimize from top of the lavatory module only with reference to applicable lavatory module drawings. [ warranty period: 78 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45405372

24 Jun, 2026 NA

Bhavnagar - Gujarat

Tender For supply of 20 pairs x 0.5 mm. dia. copper conductor twisted pair armoured underground telecom pijf cable, with solid polythene insulated copper conductors, core fully filled with filling compound and with poly al laminate moisture barrier bonded to the polythene sheath as per tec generic requirements no. gr/cug-01/03aug 2003 with latest amendment / version / revision. [ warranty period: 30 months after the date ofdelivery ] ]

CTN :45454269

12 Jun, 2026 NA

Bareli - Madhya Pradesh

Tender For set of lavatory module for lhb ac2t & ac3t coaches (mdts-133 rev-05, mdts-118 rev- 01. follow drg. no. sked-598 for electrical wiring, as per set-list no. lavmod2t&3tmcf version- 07. (note:-the supply of lavatory module is to be done in knockdown condition which can be fully assembled inside the coach (no. of pieces of lavatory module may be increased up to 4 maximum) andheight of lavatory module may be 2115+/-10 mm. for achieving height of lavatory module of 2115+/-10 mm, it shall be minimize from top of the lavatory module only with reference to applicable lavatory module drawings. the colour scheme is to be followed as per mcf letter no.rbl-md46271 (part-1 ) dtd:19.03.2024. planning letter no.m-400/mcf/rbl/fur/b08 dtd:20.01.2026 is applicable. packing instruction:spi111 [ warranty period: 78 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45422490

22 Jun, 2026 NA

Vadodara - Gujarat

Tender For supply of polythene insulated polythene sheathed jelly filled (pijf) underground telephone cable with poly-aluminium moisture barrier and steel tape armoured copper conductor confirming to rdso specification no. irs:tc-41/97 amd.1 to 3 or latest .size-20 pair x 0.63mm dia [ warranty period: 30 months after the date of delivery ] ]

CTN :45336059

12 Jun, 2026 NA

Bareli - Madhya Pradesh

Tender For supply of set of frp modular toilet for memu/tc 3-phase coaches as per drawing: mcflavmdmemut3p, version-0. additional improvements/ modifications/changes in lavatory module shall be done as per annexure-1-memu. colour shade may be as per rcf letter no. md22151, dated 29.11.2022. installation & commissioning inclusive. note: safety clause must be followed according to annexure-a of dy.cple-ii l.no.rcf/emp/1 dated. 01.04.2025.packing instruction spi111: [ warranty period: 84 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45322644

01 Jun, 2026 8.70 Lacs

Sawai Madhopur - Rajasthan

Tender For supply, installation, testing and commissioning of phase wire and street light and vairious electrical equipment needed for implementation of budget announcement 2025-26 - providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in, led street light fixture with minimum lumen output 5600 lm, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar bus bar is insulated by heat shrinkable sleeves . earth and neutral bus bar shall be half of the size of phase bus bar. ( cost of bus bar / flexible wire for interconnection between main busbar and switchgear is to be paid extra )(d)wiring between components within switchgear and incoming / outgoing cable shall be done through the terminal block only. direct connection shall not be permitted. each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. for tap-offs, adjacent terminals with shorting strips shall be used. 10% spare terminal blocks shall be provided. wire identification on marking strip shall correspond to the designation of the wiring diagrams. all wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram.(e)all wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, wiring between terminals of various devices shall be point to point (no wire splitting or tee connections) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging.(f)floor mounted panel sh

Central Government/Public Sector

CTN :45337294

15 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of polythene insulated polythene sheathed jelly field (pijf) telephone underground cable 10 pairs 0.5mm dia with poly-moisture barrier tec gr.no.gr/cug-01/03 aug 2023 (tec standard tec 68090:2003) or latest accepted make: finolex, polycab, havells, national cables, delton cables or better. with 30 months warranty [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45210944

22 Jun, 2026 NA

Vijayawada - Andhra Pradesh

Tender For supply of 20 pair pijf cable. 0.63 mm copper conductor dia, armored with galvanized steel tapes , polythene insulated , polythene sheathed , jelly filled, telephone cable with pol-al moisture barrier as per the specification no. irs:tc 41-97. or latest. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 2 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government / Public Sector

CTN :45067076

03 Jun, 2026 NA

Secunderabad - Telangana

Tender For supply of 100 pair x 0.5mm dia polythene insulated polythene strengthened jelly filled underground telephone cable with poly aluminum moisture barrier annealed copper conductor double steel tape armored with polythene jacketed as per rdso specification no. irs:tc/41/97 with amd 3 or latest , packing length should be 500mtrs per drum. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44874165

28 May, 2026 NA

Kota - Rajasthan

Tender For corrigendum : supply of 50 pair 0.63 mm dia copper conductor twisted pair armoured underground telecom pijf cable , with solid polythene insulated copper conductors, core fully filled with filling compound and with poly-al l aminate moisture barrier bonded to the polythene sheath, with two applications of galvanizedsteel tape, a s per tec generic requirements no. gr/cug-01/03aug 2003 (tec 68090:2003). [ warranty period: 30 months after the date of delivery ]

Lavatory Module Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government/Public Sector