Latest laying pipe Tenders | Government laying pipe Tenders

Central Government/Public Sector

CTN :45475154

30 Jun, 2026 30.00 Lacs

Gwalior - Madhya Pradesh

Tender For repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubular pole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and getting out in an

Central Government/Public Sector

CTN :45466892

16 Jun, 2026 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 41 )items as given below ,[1] rprg,duct 55.000 to,[2] disman,fab,str 54.000 to,[3] chng,tube of roof 162.000 m,[4] rprg of receiving chute 11.700 to,[5] disman,pipe,manhole 27.000 ea,[6] disman,fab&ern,damaged str 54.000 to,[7] disman,pipe,ms 7.200 to,[8] ern of pipe,ms 7.200 to,[9] rprg of brg housing 68.000 ea,[10] remove & fix cross beam 32.000 le,[11] rprg,car frame 50.000 ea,[12] rprg of platform 14.400 to,[13] ern,bottom stiffeners of ladle 27.000 to,[14] ern,damaged shell of ladle 23.400 to,[15] ern,top shell complete 22.500 to,[16] rprg,trunion of hot metal ladle 11.700 to,[17] rprg,brick retainers in ladle 36.900 to,[18] disman of concrete 32.400 m3,[19] fab,stand,rack,bin&fencing 18.000 to,[20] ern,stand 18.000 to,[21] disman of damaged str 13.500 to,[22] align,cross travel gearbox&mtr 1.000 ea,[23] streng&fixg,side guard plate 9.000 to,[24] disman,co gas pipe 5.000 to,[25] disman,roller,end stopper housing 2.000 to,[26] fitg,trunion by wldg&finishing 4.000 ea,[27] chng,chrgng spout w/bend plate 18.900 to,[28] dism/fab/ere shell of ldl 22.500 mt,[29] dismantl of recup from bottom shell 15.000 mt,[30] rprg,ladle supporting str 11.250 to,[31] rprg,converter shell 27.000 m2,[32] testing of optical fiber cable 4.000 ea,[33] ultrasonic testng, repaired steel ladle 4.000 ea,[34] rprg,pouring out spout shell plate etc 5.400 to,[35] changing nut,bolt&screw f/centrifuge r20 41.000 ea,[36] ern of steel/slag car main beam etc 9.000 to,[37] fitg,trunion by wldg&finishing 12.000 ea,[38] rprg,brg housing 13.000 ea,[39] ern,cage bracket,link etc 11.250 to,[40] repair,str frame 22.000 to,[41] align,g/box mtr&base 10.000 ea

CTN :45484588

18 Jun, 2026 3.78 Lacs

Kamrup - Assam

Tender For supply of replacement of existing ms iron plate of driver cabin upper side of pbs of size 15 ft x 2 ft and thick 6 mm. , replacement of existing 02 x glass of crew cabin. , supply and fixing 1 x exhaust fan for kitchen room. , supply and fixing of 04 x iron net for air wind pipe of outer side. , supply and fixing 1 x ac dc panel. , supply and fixing of 26 x 5 amp socket. , supply and fixing of 36 x led tube light. , supply and fixing of 09 x switch board with 5 amp. , replacement of existing 06 x navigation light with glass protection. , replacement of existing rotary pump of pbs as per existing specification. , repair of leakage defect of pt pump of sbs. , replacement of existing 02 x iron battery box as per existing specification including all charges. , replacement of existing fuel tank of aux engine generator as per existing specification.

CTN :40502733

16 Jun, 2026 36.53 Lacs

Jalandhar - Punjab

Tender For corrigendum : estimate for restoration of water course at rd 14932r of sarih disty by brick lining and laying pipeline

CTN :40518394

16 Jun, 2026 17.10 Lacs

Jalandhar - Punjab

Tender For corrigendum : estimate for restoration of water course at rd 3225/l of alawalpur minor by laying pipeline

CTN :44013331

01 Jul, 2026 12.69 Lacs

Barnala - Punjab

Tender For corrigendum : estimate for laying pipeline for outlet no 1430r of chung minor distt barnala

CTN :45475418

15 Jun, 2026 NA

Batote - Jammu And Kashmir

Tender For rate contract for supply of materials for repair of distribution transformers at divisional store of electric division jpdcl batote for year 2026-27 or till the next year tender is finalized - supply of materials for repair of distribution transformers at divisional store of electric division jpdcl batote (per unit rate), super enameled aluminium wire swg-21 (isi mark) in exchange of scrap, super enameled aluminium wire swg-19 (isi mark) in exchange of scrap, super enameled aluminium wire swg-18 (isi mark) in exchange of scrap, super enameled aluminium wire swg-16 (isi mark) in exchange of scrap, super enameled aluminium wire swg-14 (isi mark) in exchange of scrap, super enameled aluminium wire swg-13 (isi mark) in exchange of scrap, super enameled copper wire swg-13 (isi mark) in exchange of scrap, super enameled copper wire swg-12 (isi mark) in exchange of scrap, super enameled copper wire swg-11 (isi mark) in exchange of scrap, aluminium strip for lt winding of sizes, copper strip for lt winding for 400 kva/630kva transformers 8/4 - 10/4.5, lt bush rod brass-complete 12 mm, lt bush rod brass-complete 20 mm, lt bush rod brass-complete 25 mm, lt bush rod brass-complete 30 mm, ht bush rod 12 mm brass for 11/0.440 kv transformer (complete), l.t bush for 11/0.440 kv transformer, 12 mm, l.t bush for 11/0.440 kv transformer, 20 mm, l.t bush for 11/0.440 kv transformer, 25 mm, l.t bush for 11/0.440 kv transformer, 30 mm, ht bush 12 mm for 11/0.440 kv transformer, butter paper, cotton tape 1 roll, rubberized cork sheet 4 mm thick 3x3, rubberized cork sheet 5 mm thick 3x3, cork strip 4mm, lethoride sheet, packing sheet 1mm & 1 mm, glass empire/glass sleeves 0-4mm, glass empire/glass sleeves 8-10mm, bakelite tubes of sizes (as per sample), packing gutties 1 ,1 , nuts and bolts for transformer of sizes, insulating varnish dr. beck, old cotton sarees/ waste, wooden wedges size, ht washers, lt washers m-20, lt washers m-25, lt washers m-12, ht bush clamps ( bimetallic, heavy duty), fevicol, transformer oil, three phase, 2 hp motor, filter paper pack 36 inch/3 feet, 2 kw heater 2.5 feet long, stainless steel type(u shape) tubular finned oven heating element, thermostat rotational type, contactor ml-2, 3-phase motor 1.5 hp, filter packs 2 feet micro, thermostat 0-110, indicator (ryb) big, sproket set 92x25x25, sproket 25, single teeth, chain 10 feet (big), 1/2, chain 10 feet (big), 3/4, chain small 10 feet, 1/2, chain small 10 feet, 3/4, hose pipe, 1 inch, electronic weighing machine (capacity 10kg), electronic weighing machine (capacity 200kg), electric chain pulley 3 ton, electric chain pulley 5 ton with remote, contactor ml-4, steel washer for transformer-as per sample, ms clamping ring-as per sample, m-seal

CTN :45476466

23 Jun, 2026 15.00 Lacs

Multi City - Karnataka

Tender For sinking of borewells and erection of motor pump sets and laying pipe line at kooragalli, belavadi, hootagalli and vijayanagara 4th stage in the limits of hootagalli cmc

CTN :45413902

10 Jun, 2026 4.46 Lacs

Malappuram - Kerala

Tender For general-investigation works to construction of pulinchodu vcb and pumphouse for pumping water to vattachira by laying pipes in nannabra panchayath of tirurangadi constituency, malappuram dt- - general-investigation works to construction of pulinchodu vcb and pumphouse for pumping water to vattachira by laying pipes in nannabra panchayath of tirurangadi constituency, malappuram dt-investigation works to construction of pulinchodu vcb and pumphouse for pumping water to vattachira by laying pipes in nannabra panchayath of tirurangadi constituency, malappuram dt-investigation work

CTN :45458796

15 Jun, 2026 NA

Bharuch - Gujarat

Tender For supply of pvc pipe material - 80 mm to 300 mm sluice valve tail peace and nut bolt, cid joint, nrv and mer valve submersible motor rewinding and pump repairing from 1 hp to 25 hp 25 hp. 30 hp, 40 hp openwell submersible motor rewiring and pump repairing -starter 50 hp motor rewinding and pump repair panel repairing and starter, panel new from 2 hp to 50 hp 2.5 mm to 4 mm cable wire single phase 1 hp, 2 hp. 3hp borewell motor and three phase 5 hp, 7.5 hp, 10 hp, 15 hp, 20hp new motor. 3 ton capacity chain block and chain puller and spanner set 80 mm to 300 mm sluice valve repair and ms pipe and fitting materials bleaching powder and chlorine tablets and alm dcm brand.

Laying Pipe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector