Latest ldpe cover scrap Tenders | Government ldpe cover scrap Tenders

Central Government/Public Sector

CTN :45731004

07 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of acetone to is-170/1986. iiird revision reaffirmed 2001.supplies should bemade in sealed and new hdpe containers 5/10 litres/5kg. capacityaccompanied with material safety data sheet of the item. ]

CTN :45713556

27 Jul, 2026 16.94 Lacs

East Nimar - Madhya Pradesh

Tender For tender inviting item rate for purchasing of different item for operation and mantainance of water supply for year 2026-27 bistan - ci d-joint (cl-15) 90mm, ci d-joint (cl-15) 110mm, ci d-joint (cl-15) 150mm, ci d-joint (cl-15) 200mm, ci d-joint (cl-15) 250mm, ci d-joint (cl-15) 300mm, ci d-joint (cl-15) 350mm, ci d-joint (cl-15) 400mm, ci double flanged sluice valve(without flange) 90mm, ci double flanged sluice valve(without flange) 110mm, ci double flanged sluice valve(without flange) 150mm, ci double flanged sluice valve(without flange) 200mm, ci double flanged sluice valve(without flange) 250mm, ci double flanged sluice valve(without flange) 300mm, ci double flanged sluice valve(without flange) 350mm, ci double flanged sluice valve(without flange) 400mm, ci flange for sluice valve 90mm, ci flange for sluice valve 110mm, ci flange for sluice valve 150mm, ci flange for sluice valve 200mm, ci flange for sluice valve 250mm, ci flange for sluice valve 300mm, ci flange for sluice valve 350mm, ci flange for sluice valve 400mm, ci bend 45/90/135 degree 90mm, ci bend 45/90/135 degree 110mm, ci bend 45/90/135 degree 150mm, ci bend 45/90/135 degree 200mm, ci bend 45/90/135 degree 250mm, ci bend 45/90/135 degree 300mm, ci bend 45/90/135 degree 350mm, ci bend 45/90/135 degree 400mm, mj collar 150mm, mj collar 200mm, mj collar 250mm, mj collar 300mm, ci tee (inches) 3*3*3, ci tee (inches) 4*4*4, ci tee (inches) 6*6*6, ci tee (inches) 8*8*8, ci tee (inches) 10*10*10, ci tee (inches) 12*12*12, ci tee (inches) 4*4*3, ci tee (inches) 6*6*4, ci tee (inches) 6*6*3, ci tee (inches) 8*8*4, ci tee (inches) 8*8*6, ci tee (inches) 10*10*8, ci tee (inches) 10*10*6, ci tee (inches) 10*10*4, ci tee (inches) 12*12*10, ci tee (inches) 12*12*8, ci tee (inches) 12*12*6, ci tee (inches) 14*14*12, ci tee (inches) 14*14*10, ci tee (inches) 14*14*8, ci reducer (inches) 4*3, ci reducer (inches) 6*4, ci reducer (inches) 8*6, ci reducer (inches) 10*8, ci reducer (inches) 12*10, ci reducer (inches) 14*12, ci reducer (inches) 12*8, ci reducer (inches) 10*6, ci d-joint for hdpe pipe 90mm, ci d-joint for hdpe pipe 110mm, ci d-joint for hdpe pipe 150mm, ci d-joint for hdpe pipe 200mm, ci d-joint for hdpe pipe 250mm, ci d-joint for hdpe pipe 300mm, ci d-joint for hdpe pipe 350mm, ci d-joint for hdpe pipe 400mm, rubber gasket 90mm, rubber gasket 110mm, rubber gasket 150mm, rubber gasket 200mm, rubber gasket 250mm, rubber gasket 300mm, rubber gasket 350mm, rubber gasket 400mm, flange rubber wiser 2 inch, flange rubber wiser 2.5 inch, flange rubber wiser 3 inch, flange rubber wiser 4 inch, flange rubber wiser 6 inch, flange rubber wiser 8 inch, flange rubber wiser 10 inch, flange rubber wiser 12 inch, pvc socket 10kg pressure 90mm, pvc socket 10kg pressure 110mm, pvc socket 10kg pressure 150mm, pvc socket 10kg pressure 200mm, pvc socket 10kg pressure 250mm, pvc socket 10kg pressure 300mm, pvc bend 45/90/135 10kg pressure 90mm, pvc bend 45/90/135 10kg pressure 110mm, pvc bend 45/90/135 10kg pressure 150mm, pvc bend 45/90/135 10kg pressure 200mm, pvc bend 45/90/135 10kg pressure 250mm, pvc bend 45/90/135 10kg pressure 300mm, pvc end cap 10kg pressure 90mm, pvc end cap 10kg pressure 110mm, pvc end cap 10kg pressure 150mm, pvc end cap 10kg pressure 200mm, pvc end cap 10kg pressure 250mm, pvc end cap 10kg pressure 300mm, pvc reducer 10 kg pressure (inch) 4*3, pvc reducer 10 kg pressure (inch) 6*4, pvc reducer 10 kg pressure (inch) 8*6, pvc reducer 10 kg pressure (inch) 10*8, pvc reducer 10 kg pressure (inch) 8*4, nut bolts all type (per kg), gi pipe heavy 1.25"(per item 20 feet), gi pipe heavy 2" (per item 20 feet), gi pipe heavy 3" (per item 20 feet), gi pipe heavy 4" (per item 20 feet), gi socket long 1.25", gi socket long 2", gi socket long 3", gi socket long 4", gi tee 0.5" dia, gi tee 0.75" dia, gi tee 1" dia, gi tee 2" dia, gi union 0.5" dia, gi union 0.75" dia, gi union 1" dia, gi union 2" dia, gi bend 0.5" dia, gi bend 0.75" dia, gi bend 1" dia, gi bend 2" dia, rubbe

CTN :45298008

01 Jul, 2026 NA

Parganas - West Bengal

Tender For bid to ras supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , supply and fixing on load change over switch ss enclosure complete with capacity 200 amp, 415 volt, 4 pole, 50 hz. , supply and fixing sheet metal enclosure spn db double door having facility to fix mcb spn as incomer and mcbs as outgoing, spn 4 ways, ip-43 , supply and fixing sheet metal enclosure tpn db double door having facility to fix mcb tpn as incommer and mcbs as outgoing tpn 4 ways, ip-43 , supply and fixing bus bar chamber 100 amp, 4 way, 415 volts enclosurre is made from crca sheet of thickness 3.15mm crca sheet cover , supply and fixing of straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade nominal cross sectional area not exc.50 sqmm, 3.5 by 4 core , supply and fixing straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade cross sectional area 240 sqmm to 300 sqmm, 3.5 core. , supply and fixing end termination epoxy cable joint kit including jointing materials for making joints of ug electric cable 1100 v grade nominal cross sectional area 240 sqmm to 300 sqmm, 3.5 core , supply and fixing of galvanised iron pipe 100 mm bore dia light grade for protection of ug cable , supply of digging nad layingg in excavation trenches not exc. 1.50 m wide and not exc. 1.50 m in depth, complete all as specified and directed. , returning, filling in including spreading, levelling, watering and well ramming in layers not exc. 250 mm in soft loose soil , supply and fixing of galvanised iron pipe 40 mm bore dia light grade for protection of ug cable , supply, installation, commissioning and testing including providing all necessary electrical connection,lt feeder panel board of size 1.0 m x 0.6 m x ) /bid number : gem/2026/b/7568567 * /dated: 22-05-2026 & & / bid document 1 / 30 & & ' ' /item category 0.5 m , supply, installation, commissioning and testing including providing all necessary electrical connections lt feeder panel board of size 0.6 m x 0.6 m x 0.5 m , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick.complete all as specified and directed in boq spec file , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick. complete all as specified and directed in boq spec file , supply and fixing of sub-class b brick, well burnt, laid breadth-wise along the axis of cable laid in trenches over sand cushion laid for ug cable protection, complete all as specified and directed. , supply and fixing horizontal boring under a depth of 0.65 m from the gl for passing pipe upto 40 mm bore dia , supply of digging and laying of removing excavated materials soils not exc. 50 m and depositing where directed at a level not exc.1.50 m , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 300 sqmm including bricks, gi pipes etc. , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 50 sqmm 3.5 core including bricks, gi pipes etc. , supply of digging and laying of sand cushioning dry in trenches for protection of ug cables below, above and around the ug cable laid in trenches of 230 mm spread thickness , cutting road by hard standing and making good disturbed surfaces by using pcc type-c2,1-3-6 by using 40 mm graded stone aggregate , boring of holes under road,pavement,hard standing by trenchless technology using ultra sounding technique including hdpe pipe 150 mm dia suitable for 0.4 mpa working pressure , cutting chases, chipping in making good to facings, where required and pointing in cement mortar 1- 3 to ends or edges of landings, steps, sills, sunshades, shelves, lintels etc. , submain wiring comprising single core 2 runs of 6 sqmm nominal coss sectional area frlh

corporations/Associations/Others

CTN :45671737

01 Jul, 2026 NA

Pune - Maharashtra

Tender For submission of a rate schedule for machinery and equipment to prepare an estimate for installing rainwater harvesting systems in stormwater lines and low lying areas along main and internal roads within the municipal corporation limits. - item name, providing and constructing recharge pit of 2.0m deep and 1.0m dia of precast rcc rings with 6.5 dia. x 25m deep bore well at the floor of recharge pit including providing and supplying one complete ai-enabled single integrated modular smart groundwater recharge unit with recharge-volume measurement, real-time clog monitoring, recharge-water quality monitoring, soil quality / site suitability assessment, iot communication, ai dashboard and gis monitoring platform, suitable for urban rainwater and storm water groundwater recharge applications. the supplied unit shall be a single integrated smart recharge unit and shall not be a combination of disconnected or separately assembled devices. all field-level hardware, sensors, filtration arrangement, sedimentation section, recharge-volume measurement system, real-time clog monitoring system, recharge-water quality monitoring system, iot controller, communication module, qr/gis asset identification and data communication components shall be integrated within the supplied smart recharge unit and shall operate as one complete system. the ai dashboard, gis monitoring platform, cloud hosting, sim/data communication and software support shall be digitally integrated with the supplied unit for live monitoring, alerts, analytics and reporting. internal components shall not be treated as separate payable items. the main body / modular assembly of the unit shall be made primarily from hdpe/frp / upvc or equivalent corrosion free material and shall be suitable for long-term contact with rainwater / storm water, groundwater recharge applications and repeated cleaning. the unit shall be corrosion-resistant, water-resistant, durable and easy to maintain. the unit shall be modular, removable, reusable and serviceable. the design of the unit shall enable cleaning, sediment removal, filter inspection, filter-media replacement, sensor inspection and refitting without damaging the surrounding civil structure, chamber or recharge arrangement. the unit shall have a minimum external diameter of 750 mm and minimum overall height of 2000 mm with frp cover of suitable size having 40 mt capacity. the unit shall have sufficient internal space for filtration arrangement, sediment holding, recharge-volume measurement, real-time clog monitoring, water-quality monitoring, iot components, sensor housing, cleaning access and maintenance. the unit shall include multistage filtration, debris arrest arrangement, first-flush / bypass provision, sedimentation and silt-management section, recharge-volume measurement system, recharge-rate monitoring, real-time clog monitoring, recharge-water quality monitoring after filtration and before recharge, soil quality / site suitability assessment module, iot-based data communication, qr, gis asset identification, ai-enabled web dashboard, gis monitoring platform. the unit shall be capable of measuring, recording and reporting actual recharge volume, recharge-rate trend, sedimentation status, clogging condition, recharge-water quality parameters, soil / site suitability parameters, unit health, sensor health, battery status, communication status and maintenance status on a web-based dashboard. the item shall be treated as one complete integrated smart unit. internal components such as hdpe/ frp modular body, filtration arrangement, sedimentation section, measurement systems, sensors, iot controller, communication module, ai dashboard, gis platform, cloud hosting and sim/data support shall not be measured or paid separately. the unit shall have authentication from any govt. institute like c.o.e.p./cw&prs/gsda etc. the unit shall be supplied with five years warranty against manufacturing defects, material defects and functional failur

corporations/Associations/Others

CTN :45707090

13 Jul, 2026 NA

Surat - Gujarat

Tender For item rate tender for preparation of artificial ponds incl. excavation, laying of hdpe sheet, banners, supply of machinery & manpower etc. for dashama visarjan & ganesh visarjan - 2026 in new east zone(sarthana), surat

Central Government/Public Sector

CTN :45718194

08 Jul, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of acid sulphuric concentrated, battery grade conforming to is.266-2025 (fifth revision) in 20 kgs. non stackable high density ployethylene (hdpe) container, class-l conforming to is: 6312-1994 (second revision) reaffirmed 2020. [ warranty period: 24 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45708372

24 Jul, 2026 NA

Multi City - Multi State

Tender For zinc oxide pigment (powder) for paint to is:35-2021 in 25 kgs. or 30 kgs. hdpe polythene bags. the date of supply of the material should be within 60 days from the date of manufacture. [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45709698

03 Jul, 2026 NA

Multi City - Multi State

Tender For zinc oxide pigment (powder) for paint to is:35/latest in 25 kgs. or 30 kgs. hdpe polythene bags. the date of supply of the material should be within 60 days from the date of manufacture. [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Central Government And Public Sector

CTN :45710225

20 Jul, 2026 NA

Multi City - Multi State

Tender For supply of pvc conduit flexible spiral reinforce hdpe pipe size: 3/4" make: dutron / kamaflex. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45638037

20 Jul, 2026 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : supply of ''soap liquid perfumed (rose/colonge/sandal wood to is- 4199-2001 or latest. packing conditions in the manufacturers original packing in 25-50 kg in hdpe container to is- 10840/1994 or latest.'' [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Ldpe Cover Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors