Latest lead screw Tenders | Government lead screw Tenders

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

CTN :45476070

15 Jun, 2026 2.37 Crore

Saharanpur - Uttar Pradesh

Tender For audyanik proyog avam prashikshan kendra saharanpur mein nirmaanadhin shahad utkrishthta kendra se sambandhit machinery or parts ki apoorti or establishment ka karya - supply & installation of automatic honey bottling filling machine with sensor based calibrator including with filling range (50 grams to 1000 grams), outout/min (any size within range 3000 to 5000 bpd), filling system (pneumatic vmp system synchronize with servo motor), direction of movement (left to right), number of head/syringe (single), drop controller (y- pneumatic stopper), calibration of machine (automatic with sensor), inlet material stopper (fg valve), feed tank (direct connected), feed tank overflow controller (float type), material feed in m-tank (automatic), heating arrangement in m-tank (water bath system), material shaker in m-tank (electrical shaker), bath temperature & material temperture monitoring system (full auto-control with ccp), electric spply (230 cm v/50hz), tempreture controller (pid), machine dimensions (250 cm x 100 cm x 210 cm (approx) and net weight (300 kg). etc all complete with isi marked., supply & installation of automatic linear capping machine including with output/hour (any size with range 4000 bpd), direction of movement (left to right ), machine dimensions (180 cm l x 90 cm w x 170 cm h (approx)), sensor (panasonic), pneumatic accessories (spac) and no bottle- no cap (yes). etc all complete with isi marked., supply & installation of automatic round bottle sticker labelling machine including with output/hour (10000 bpd), direction of movement (left to right), controlling (micro controller base mm interface), conveyor motor (0.25 hp/415 v/ 50 hz), pressing device motor (60 watt / 220 v/ 50 hz), servo motor (750 watt), label accuracy (+/-1mm), gap sensor (u-type), bottle spacer (electronic), variable speed (40 bpm-max), hmi & plc (7 inch coloured touch pad type), pneumatic (spac), pressure roller (sillicon), adjustment (lead screw), label size (up to 100 mm width), bottle dia (up to 120 mm dia), batch counter (yes) and online data indication (yes) etc. all complete with isi marked., supply & installation of air compressor including with type (reciprocating), tank volume (250 ltr), pressure range (10 kg/ cm 2), no of head-(02 nos.), type (industrial) and operation (continue) etc. all complete with isi marked., supply & installation of induction sealing including with automatic induction sealing machine etc. all complete with isi marked., supply & installation of turn table including with 750 mm dia turn table moc ss304, motor - 0.5 hp/440 vac, vfd - invt/delta and model -cgmp etc. all complete with isi marked., supply & installation of packing conveyor including with 10 feet long packing coveyor, width of conveyor 300 mm, motor - 0.5 hp/440 vac and model - cgmp etc. all complete with isi marked., supply & installation of auto honey feed pump including with automatic honey feed system for filling machine from plant etc. all complete with isi marked., supply & installation of bottle washing machine including with automatic bottle cleaning machine tilting action type etc. all complete with isi marked., supply & installation of particle inspection table including with online particle checker etc. all complete with isi marked., supply & installation of online printer including with online ink jet printer etc. all complete with isi marked., supply & installation of slate chain conveyor including with ss304 slate chain conveyor, motor - 0.5 hpx 3 nos, vfd - 3 nos and guider - as per design etc. all complete with isi marked., supply & installation of automatic wax sheet foundation mill including with sheet making roller set (cell size 5.4 mm, length ,600 mm, dia 200 mm), cold water circulation system 0.5 hp, conveyor belt length - 300 mm, sheet cutting system, water cooling system 1.5 - ton cap, wax malting tank, wax filtration system, ss tray, ss bucket, operation by hmi, dat

Central Government/Public Sector

CTN :45370322

09 Jun, 2026 NA

Multi City - Multi State

Tender For supply of lead screw (left head ram) as per drawing no. 1m553-sp-2 along with matching lower vertical nut drawing no. 1m553/557-sp-21 & upper vertical nut drawing no. 1m553-sp-95 , lead screw (right head ram) as per drawing no. 1m553/557-sp-79 along with matching upper vertical nut drawing no. 1m553/557-sp-84 & lower vertical nut 1m553/557-sp-108 , lead screw (right hand saddle movement) as per drawing 1m553/557-sp-107 along with matching horizontal nut 1m553/557-sp-104 , lead screw (left hand saddle movement) as per drawing no. 1m553/557-sp-106 along with matching horizontal nut as per drawing no. 1m553/557-sp-113 , lead screw (cross rail hor. feed/saddle movement) as per drawing 1541-sp-109 along with matching nut 1541/1531-sp-43 (for length l 2000 mm) , lead screw (cross rail up/down movement) as per drawing 1531/1541-sp-164 along with matching nut 1531/41-sp-135 , lead screw (ram movement) as per drawing 1541-sp-108 along with matching nut 1541/1531-sp-22 , lead screw (cross rail hor. feed/saddle movement) as per drawing 1541-sp-109 along with matching nut 1541/1531-sp-43 (for length l 2272 mm )

CTN :45359487

08 Jun, 2026 NA

Thane - Maharashtra

Tender For supply of set of lead screw and box nut consist of 1) cross feed screw(hmt part no. 730024133) &nut(hmt part no

Central Government/Public Sector

CTN :45337981

02 Jun, 2026 NA

Tirupattur - Tamil Nadu

Tender For supply of load nut & lead screw drg. no. rcf/mech/mh/m1 with safety nut & all chuck nuts, material of lead screw en 24 forged, and thread of load nut-phosphorus bronze, all items will be supplied as per sample & as per drg. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45337040

03 Jun, 2026 NA

Dahod - Gujarat

Tender For supply of lead screw and nut for ajbt lathe machine as per drg no wr-dhd-drg/3-m-8469 ]

CTN :45322644

01 Jun, 2026 8.70 Lacs

Sawai Madhopur - Rajasthan

Tender For supply, installation, testing and commissioning of phase wire and street light and vairious electrical equipment needed for implementation of budget announcement 2025-26 - providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in, led street light fixture with minimum lumen output 5600 lm, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar bus bar is insulated by heat shrinkable sleeves . earth and neutral bus bar shall be half of the size of phase bus bar. ( cost of bus bar / flexible wire for interconnection between main busbar and switchgear is to be paid extra )(d)wiring between components within switchgear and incoming / outgoing cable shall be done through the terminal block only. direct connection shall not be permitted. each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. for tap-offs, adjacent terminals with shorting strips shall be used. 10% spare terminal blocks shall be provided. wire identification on marking strip shall correspond to the designation of the wiring diagrams. all wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram.(e)all wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, wiring between terminals of various devices shall be point to point (no wire splitting or tee connections) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging.(f)floor mounted panel sh

corporations/Associations/Others

CTN :45321251

10 Jun, 2026 NA

Kolar - Karnataka

Tender For auction sale of used scrap grinding wheels,used scrap aluminium valves,used scrap ms valves pumps,scrap electric motors,obsolete discarded bolts nuts washers springs,obsolete discarded copper round plate components,used scrap high percentage nickel chromium charge trays,obsolete discarded hoses with ss end fittings filters,obsolete discarded nipples adapters,scrap high percentage nickel chromium heating elements holding rods tubes,used damaged scrap broken saw cutting machine blades,salvaged condemned beml equipment be200,salvaged condemned beml equipment be220,used scrap links of various models,end bits of steel rods and pipes,used scrap 11 kv bulk oil circuit breaker with panel,used scrap codemned heat treatment furnace,used scrap aluminium mixed items.,scrap gi ms pipes,obsolete discarded wheel disc rims,scrap condemned gi ms sheet metal items,obsolete discarded field returned condemned axles pto,used scrap condemned co2 and annual rate contract welding machines and parts,scrap gears,obsolete discarded scrap hydraulic cylinders attachments,used scrap sheet metal items fabricated parts structures,obsolete discarded lamp guards,used scrap small casting forging bushes,used scrap heavy castings steel cast iron scrap-field failure items,condemned scrap hoses with springs,condemned scrap filters,obsolete discarded brake pads brake bands,used oil filled in barrels,obsolete discarded wire harness,scrap defence armoured vehicles7 nos approximately

Central Government/Public Sector

CTN :45318042

15 Jun, 2026 NA

Koraput - Odisha

Tender For tender for supply of forming and machining 70 lines sheet metal components with hal material - stopper ring , adjusting washer , adjusting washer , bracket , flange , flange , flange , flange , flange , gasket , adapter , adapter , ribs , rib , rib , rib , fin , locking ring , gasket , gasket , screen , screen , screen , screen , screen , locking plate , net , bearing screen , bearing shield , gasket , gasket , gasket , net , gasket , gasket , gasket , conical net , gasket , gasket , net , bracket , packing , gasket , connecting link , ring , connecting link , ring , stand profile , bracket , bracket , bracket , bracket , gasket , net , flange , flange , tape , gasket , bracket , gasket , cover plate , plate , lock washer , gasket , fin , front wall , bracket , rib , bracket , base , cover plate , flange

CTN :44958873

27 May, 2026 NA

Meerut - Uttar Pradesh

Tender For bid to ras supply of backing pad for sanding machine : - backing pad for sanding machine gex thirty four one hundred fifity , float valve three inch metal for test bed no twenty one , spider l two twenty five for test bed no twenty one , gate valve two inch metal for test bed no twenty one , t pin connected with wire for ac two ton split , pressure pipe steel for press sleeving hydraulic machine , screw thread lead screw for lathe machine , solid tyre size seven to twelve for forklifter five ton , solid tyre size three hundred to fifiteen for forklifter five ton , bearing gen set sixty three kva , potentiometer potel vr three to fifty k ohm for power supply regulated sixty four v five a , on off switch for power supply regulated sixty four v five a , cooling fan two twenty v four inch for power supply regulated sixty four v five a , copper winding wire twenty one swg for lathe machine capstan , copper winding wire twenty three swg for lathe machine capstan , phase preventerfor lathe machine capstan

Lead Screw Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector